锻压技术

基于DYNAFORM的汽车前防撞梁支撑板的拉延模具设计

英文标题：Design on drawing die of automotive front anti-collision beam support plate based on DYNAFORM

作者：胡心平苏合新王言德

单位：齐鲁工业大学

关键词：

分类号：TG385.2

出版年,卷(期):页码：2017,42(9):118-122

摘要：

Automotive panels mainly consist by stampings, and the design of stamping die is closely related to the forming quality of automotive panels. The drawing process of an automotive anti-collision beam supporting plate was simulated by the DYNAFORM, and some parameters such as the stamping speed, drawing rib layout，blank holder force and clearance between punch and die were selected and designed. By analyzing the thickness distribution of the above part, the forming result was evaluated according to thickness difference, and the parameters combination with good forming effect were determined. The simulation results show that after the equivalent solid drawing drawbead of the die is designed, the best forming result is obtained with blank holder force 360 kN， stamping speed 4000 mm·s-1 and clearance between punch and die 0.66 mm. The die design and results of simulations can provide a design reference for other anti-collision beam supporting plate of types automotive.

基金项目：

山东省科技发展计划项目（2014GGX103035）

胡心平（1969-），男，博士，教授

参考文献：

［1］中国锻压协会. 汽车冲压件制造技术[M]. 北京：机械工业出版社，2013.

China Forging Press Association. Manufacturing Technology of Automobile Stamping Parts [M]. Beijing: China Machine Press, 2013.

［2］胡平.汽车覆盖件模具设计[M]. 北京：机械工业出版社，2011.

Hu P. Die Design of Automotive Panel [M].Beijing: China Machine Press, 2011.

［3］叶梦彬, 马宝顺. 国内汽车冲压模具设计业的现状及发展方向[J]. 模具制造, 2017, 17(3):1-5.

Ye M B, Ma B S. The present situation and development trend of domestic automotive stamping die design [J]. Mould Manufacturing, 2017, 17(3):1-5.

［4］邵瑞影. 汽车前保险杠防撞梁拉深成形过程仿真分析[J]. 锻压技术, 2014, 39(6):41-44.

Shao R Y. Simulation analysis of drawing process of front bumper beam [J]. Forging & Stamping Technology, 2014, 39 (6): 41-44.

［5］白昆程，高艺红. 基于热冲压成型技术的汽车前防撞梁设计[J].汽车工程师，2013,（2）：24-25.

Bai K C, Gao Y H. Design of front anti-collision beam for automobile based on hot stamping technology [J]. Automotive Engineer, 2013, (2): 24-25.

［6］赵磊.等效拉延筋和真实拉延筋对顶盖后横梁模拟成形质量的影响[J].锻造与冲压，2011,（3）：57-62.

Zhao L. Influence of equivalent drawbead and true drawbead on simulation forming quality of the rear cover beam [J]. Forging & Metalforming, 2011, (3): 57-62.

［7］廖伟. 汽车覆盖件模具设计技巧、经验与实例[M].北京：化学工业出版社, 2013.

Liao W. Design Technology, Experience and Examples of Automotive Panel Dies [M]. Beijing: Chemical Industry Press, 2013.

［8］李东君.基于Dynaform 的某汽车外板件拉延分析与模具设计[J].锻压技术，2016,41（4）:151-156.

Li D J. Drawing analysis and die design of an automobile outer panel based on Dynaform [J]. Forging & Stamping Technology, 2016, 41 (4): 151-156.

［9］孟凡芳，徐凯，宋慧，等.基于 CAD/CAE 的汽车覆盖件拉延模设计[J].锻压技术，2017，42（1）：98-100.

Meng F F, Xu K, Song H, et al. Design of drawing die for automobile panel based on CAD/CAE [J]. Forging & Stamping Technology, 2017, 42 (1): 98-100.

［10］向小汉，陈文勇.汽车覆盖件模具设计[M]. 北京：机械工业出版社，2013.

Xiang X H, Chen W Y. Die Design of Automotive Panel [M]. Beijing: China Machine Press, 2013.

服务与反馈：

【文章下载】【加入收藏】