锻压技术

复杂阀体的闭式多向模锻工艺

英文标题：Closed multi-direction mold forging process of complex valve body

作者：周凌华康明敏李锡娟

单位：湖州机床厂有限公司

分类号：TG316.3

出版年,卷(期):页码：2017,42(12):11-14

摘要：

介绍了一种较为复杂的两端不对称、侧壁有凸台的复杂阀体多向模锻工艺，包括从原材料快速加热、制坯、去氧化皮、模锻、冲孔以及锻件输送、模具冷却润滑等整套工艺流程。通过数值模拟，对阀体在多向模锻中的关键工序进行有限元分析，寻找最佳的成形方案，再通过实际生产验证，对数值模拟的结果做进一步验证及修正。实际产出的阀体锻件完全符合设计要求，且其金属流线连续完整，整体力学性能较以往工艺有较大提高。整套工艺可节省约80%的劳动及约70%的后续金属切削余量。

A complex mold forging process of a complicated valve with asymmetrical ends and side walls was introduced including the rapid heating of raw materials, billets, removal of oxidation skin, mold forging, punching and forging conveying, mold cooling, lubrication and other complete process. Then, the key processes of the body in the multi-direction mold forging were analyzed by numerical simulation to search for the optimized forming method, and the results of numerical simulation were verified and corrected by the actual production verification. Therefore, the actual output of the body forgings fully met the design requirements, and the metal flow was continuous and complete. Thus, the overall mechanical properties were improved greatly comparing with the previous process, and the whole process could save labor about 80% and the subsequent metal cutting allowance about 70%.

基金项目：

浙江省工业新产品项目（20162185）

作者简介：周凌华（1987-），男，学士，工程师 E-mail：zhoulh@hzjcc.com

参考文献：

［1］谢懿.实用锻压技术手册[M].北京：机械工业出版社，2003.

Xie Y. Practical Handbook of Forging Technology[M].Beijing：China Machine Press，2003.

［2］高新.多向模锻的现状与发展[J].锻造与冲压, 2010，(6)： 24-34.

Gao X. Present situation and development of multidirectional die forging[J].Forging & Metalforming，2010, (6)：24-34.

［3］江荣华. 无飞边闭式胎模锻新工艺[J].锻压装备与制造技术，2010，45（1）：81-83.

Jiang R H. Closed die forging process without flying edge[J]. China Metalforming Equipment & Manufacturing Technology，2010，45（1）：81-83.

［4］任运来，李明权，任杰，等.高温高压阀体的多向模锻技术研究[J].重型机械，2015,(5)：1-5.

Ren Y L，Ling M Q， Ren J，et al. Study on multi die forging technology of high temperature and high pressure valve body[J]. Heavy Machinery, 2015,(5)：1-5.

［5］张大伟，孙志超，杨合.四通阀多向加载成形参数影响模拟分析[J].锻压技术，2010,35(3)：148-152.

Zhang D W，Sun Z C，Yang H. Simulation analysis of forming parameter effect on cross valve multi-way loading process[J]. Forging & Stamping Technology, 2010, 35(3)：148-152.

［6］刘兵，周志明，黄伟九，等.机体座多向模锻精密成形的数值模拟[J].锻压技术，2015, 40(11):19-22.

Liu B，Zhou Z M，Huang W J，et al. Numerical simulation of multi-directional precision forging process of body frame[J]. Forging & Stamping Technology, 2015, 40(11):19-22.

［7］万松，徐春国，郭永强,等.基于一种预制坯形状下铁座多向锻造成形缺陷分析[J].锻压技术，2015,40(11):8-12.

Wan S，Xu C G，Guo Y Q，et al. Analysis on multi-ram forging defects of railway clamp based on a certain kind of preformed blank[J]. Forging & Stamping Technology, 2015, 40(11):8-12.

［8］刘世骧，安美玲，都彦贵.模锻工艺补偿空间[J].兰州工业高等专科学校学报，2003，10（1）：35-38.

Liu S X，An M L，Du Y G. Compensation space of die forging process[J]. Journal of Lanzhou Polytechnical College，2003，10（1）：35-38.

［9］张宝亮，周志明，姚照云,等. 一种提高多向模锻模具寿命的模具及其模锻方法[P].中国：CN 103028689 A, 2013-04-10.

Zhang B L，Zhou Z M，Yao Z Y，et al. Die for improving die life of multidirectional die forging and die forging method[P]. China: CN 103028689 A, 2013-04-10.

［10］李集仁，杨良伟.锻工实用技术手册[M].南京：江苏科学技术出版社，2002.

Li J R，Yang L W. A Practical Technical Manual[M].Nanjing：Phoenix Science Press，2002.

服务与反馈：

【文章下载】【加入收藏】