锻压技术

30Cr钢高温变形流变应力模型

英文标题：Flow stress model for steel 30Cr during hot deformation

作者：肖艳红郭成

分类号：TG113

出版年,卷(期):页码：2018,43(1):176-180

摘要：

30Cr钢常用于大型阀体锻件，利用Gleeble-1500实验机对30Cr钢进行热模拟压缩实验，获得应变速率为0.1，0.5，2.5和10 s-1，变形温度为1000，1050，1100，1150和1200 ℃，压缩变形量为60%条件下的30Cr钢的真应力-真应变曲线。实验结果表明，高温流变应力随着变形温度的增加和应变速率的降低而减小，在一定的变形条件下，呈现出典型的单峰型动态再结晶的应力-应变曲线特征。采用Arrhenius双曲正弦关系描述30Cr钢的高温流变行为，确定其热变形激活能，建立了30Cr钢的流变应力模型，其结果可为大型阀体模锻成形工艺的数值模拟和工艺参数的确定提供参考。

Steel 30Cr is used to forge the large valve. A set of hot compression experiment on steel 30Cr was conducted by Gleeble-1500 thermal-mechanical simulator, and the true stress-true strain curves were achieved with strain rates of 0.1, 0.5, 2.5 and 10 s-1, deformation temperatures of 1000, 1050, 1100, 1150 and 1200 ℃ and deformation degree of 60%,respectively. The experimental results show that the flow stress at high temperature decreases with the increasing of deformation temperature and the decreasing of strain rate, and in the certain deformation conditions, the typical characteristics of true stress-true strain curves of dynamic recrystallization with single peak appears. Furthermore, the rheological behavior at hight temperature of steel 30Cr was described by the Arrhenius hyperbolic sine relationship, and the activation energy of hot deformation was confirmed. Finally, the flow stress model of steel 30Cr was established. The results can provide good reference for numerical simulation and determination of process parameters for die forging of large valve．

基金项目：

上海市教委青年教师资助计划 (A30DB1621009-52); 校级重点学科“材料科学与工程”项目(XXKZD1601)

作者简介：肖艳红(1983-)，女，博士，讲师，E-mail：yhxiao@sspu.edu.cn；通讯作者：郭成(1948-)，男，博士，教授，博士生导师，E-mail：gch@mail.xjtu.edu.cn

参考文献：

[1]孙艮芝.三通阀模锻成性工艺数值模拟研究[J]. 精密成形工程, 2012，4(6)：85-87.

Sun G Z. Numerical simulation on the forging process of triple valve [J]. Journal of Netshape Forming Engineering, 2012，4(6)：85-87.

[2]Zhang D W, Zhao S D, Yang H. Analysis of deformation characteristic in multi-way loading forming process of aluminum alloy cross valve based on finite element model [J]. Transactions of Nonferrous Metals Society of China, 2014, 24(1):199-207.

[3]任运来，曹峰华，任杰，等. 水平带法兰三通阀体多向模锻工艺研究[J].上海电机学院学报, 2015，18(5): 249-254.

Ren Y L, Cao F H, Ren J, et al. Multi-ram die forging process of triple-valve body with horizontal flange [J]. Journal of Shanghai Dianji University, 2015，18(5): 249-254.

[4]张家伟.带主法兰三通阀体多向模锻成形工艺研究[D].秦皇岛：燕山大学, 2015.

Zhang J W. Research on Multi-ram Die Forging Forming Process of Triple-valve Body [M]. Qinhuangdao: Yanshan University, 2015.

[5]李志颖，孙志超，杨合，等. AISI-5140三通阀多向加载成形开裂预测[J].塑性工程学报, 2010，17（4）：16-22.

Li Z Y, Sun Z C, Yang H, et al. Crack prediction in multi-way loading forming process of AISI-5140 tee-joint valve [J]. Journal of Plasticity Engineering, 2010，17（4）：16-22.

[6]王小娜，张辉. 5005铝合金热压缩变形行为[J].锻压技术, 2017, 42(2):119-123.

Wang X N, Zhang H. Hot compression behavior of aluminum alloy 5005 [J]. Forging & Stamping Technology, 2017, 42(2):119-123.

[7]褚亮，谢谈，钟志平，等. S34MnV钢热压缩变形的流变应力本构方程[J]. 塑性工程学报, 2017，24（3）：179-183.

Chu L, Xie T, Zhong Z P, et al. Constitutive equation of flow stress of S34MnV alloy steel during hot compression [J]. Journal of Plasticity Engineering,2017，24（3）：179-183.

[8]许午阳，刘华，曹鋆汇，等. 一种锻造斗齿用低合金耐磨钢热变形行为[J].锻压技术, 2017，42（2）:128-132.

Xu W Y, Liu H, Cao J H, et al. Hot deformation behavior on low-alloy high-abrasive steel used for forging bucket teeth [J]. Forging & Stamping Technology, 2017，42（2）:128-132.

[9]东赟鹏，王超渊，宋晓均，等. GH5188合金流变行为研究[J]. 锻压技术, 2013，38（6）:116-120.

Dong B P, Wang C Y, Song X J, et al. Study on plastic deformation behavior of GH5188 superalloy [J]. Forging & Stamping Technology, 2013，38（6）:116-120.

[10]Sellars C M, Mctegart W J. On the mechanism of hot deformation [J]. Acta Metallurgica, 1966, 14(9): 1136-1138.

[11]Zener C, Hollomon J H. Effect of strain-rate upon the plastic flow of steel [J]. Journal of Applied Physics, 1944, 15(1):22-27.

服务与反馈：

【文章下载】【加入收藏】