锻压技术

数控转塔冲床模具的使用和维护方法

英文标题：Methods of operation and maintenance for NC turret punch press die

作者：王志伟周益军

单位：扬州市职业大学

分类号：TG 385.2

出版年,卷(期):页码：2018,43(4):118-123

摘要：

数控转塔冲床模具的使用和维护水平，直接影响工件的加工质量和模具使用寿命。介绍了数控转塔冲床的工作原理、组成结构以及数控转塔冲床模具的基本知识，重点阐述了标准模具和成形模具的选用原则。分析了数控转塔冲床模具在使用过程中出现的模具带料、模具磨损、废料反弹、冲压噪声、模具对中性等问题的产生原因，并提出了相应的解决措施。最后从模具间隙、模具刃磨、模具润滑、模具清洁和模具维修等多个方面给出了数控转塔冲床模具使用和维护时应遵循的技术要点，以指导企业和用户正确合理地使用和维护模具，满足实际生产要求。

The processing quality of work pieces and service life of die were directly impacted by the operation and maintenance level of NC turret punch press die. Therefore, the principle, structure and its basic knowledge of NC turret punch press die were introduced, and the selection principle of standard die and forming die were emphatically expounded. Then, the causes of material sticking, die wear, scrap rebound, stamping noise and dislocation of upper and lower dies in the using process of NC turret punch press die were analyzed, and then the solving measures were put forward. Finally, the technical points to follow in the operation and maintenance process of NC turret punch press die were given from many aspects of die clearance, die edge sharpening, die lubrication, die cleaning, die repair,etc. in order to guide enterprises and users to correctly and rationally operate and maintain dies and meet the actual production requirements.

基金项目：

江苏省高校品牌专业建设工程资助项目（PPZY2015C234）

王志伟（1984-），男，硕士，讲师；E-mail：my1984www_wzwyong@126.com

参考文献：

[1]胡金龙. 数控转塔冲床模具磨损在线监测装置的研发 [J].锻压装备与制造技术,2016,51(5):51-53.

Hu J L. Research and design of on-line monitoring device for tool wear in CNC turret punch press [J]. China Metalforming Equipment & Manufacturing Technology, 2016,51(5):51-53.

[2]李维春.厚转塔型数控冲床及模具的应用[J].模具制造,2016,16(4):4-7.

Li W C. Application of thick numerical control turret punch press and die [J]. Die & Mould Manufacture, 2016, 16(4):4-7.

[3]龙晓斌 ,李志伟,龙川, 等.精密高速伺服数控冲床主机结构设计[J].锻压技术, 2014,39(7):96-101.

Long X B, Li Z W, Long C, et al. Mechanism structure design of precise high-speed servo CNC punching press[J]. Forging & Stamping Technology, 2014, 39(7):96-101.

[4]JB/T 10928—2010, 数控转塔冲床专用模具[S].

JB/T 10928—2010, Tooling for CNC turret punch machine [S].

[5]张恒,彭建飞.基于零件冲裁毛刺高度的冲压模具磨损预测[J].锻压技术,2017, 42 (12):123-127.

Zhang H, Peng J F. Prediction of stamping die wear based on blanking burr height of part[J]. Forging & Stamping Technology, 2017, 42 (12):123-127.

[6]曲卯林,高惠明,王通, 等.冲裁模具磨损及使用寿命的毛刺预测法[J].现代制造工程,2014,(4):72-76.

Qu M L, Gao H M, Wang T, et al. The prediction of blanking wear and the service life based on the analysis of burr [J]. Modern Manufacturing Engineering, 2014, (4): 72-76.

[7]刘建超,张宝忠.冲压模具设计与制造 [M].北京:高等教育出版社,2010.

Liu J C, Zhang B Z. The Design and Manufacturing of Stamping Dies [M]. Beijing: Higher Education Press, 2010.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】