锻压技术

新世纪中国塑性加工行业的发展与展望

英文标题：Development and perspectives on plastic forming industry of China in the new century

作者：苑世剑

单位：哈尔滨工业大学

分类号：TG306

出版年,卷(期):页码：2018,43(7):12-16

摘要：

进入新世纪以来，在航空、航天、汽车和装备制造等行业的国家重大需求的牵引下，中国塑性加工行业获得快速发展，取得举世瞩目的成绩。根据2000年以来塑性加工行业获得国家技术发明奖和科技进步奖的情况，讨论了汽车覆盖件成形、高性能轻量化构件成形和多工位挤压等塑性加工关键技术的创新与发展，介绍了中国研制的超大型液压成形机、超大型环轧机、360 MN垂直挤压机和120 MN铝合金板材拉伸机等 “世界第一”的超大型装备，展望了新世纪塑性加工技术发展趋势，包括：超大尺寸复杂构件塑性成形技术、轻质耐高温材料高性能复杂构件塑性成形技术、非理想材料塑性本构模型与高精度数值模拟、智能化塑性加工装备及生产线。

A rapid development is acquired in plastic forming industry of China under the major national requirements in the industries of aviation, aerospace, automobile, equipment manufacturing and others since the new century, and remarkable achievements are obtained. Then, according to the National Technological Innovation Award and the National Scientific and Technological Progress Award in plastic forming industry since 2000, the innovations and developments of key technologies in plastic forming process were discussed such as automobile panel forming, high-performance and lightweight component forming, multi-position extrusion, etc. Furthermore, some “No.1 in the world” super-large equipment made in China was introduced including super-large hydroforming press, super-large ring rolling mill, 360 MN vertical extruding machine, 120 MN tensionstretcher for aluminium alloy plate, etc., and the development trend of plastic forming technologies in the new century was looked forward involving plastic forming technology of super-large and complex components, plastic forming technology of high performance complex components for lightweight and high temperature resistant material, plastic constitutive model of non-ideal material, high precision numerical simulation and intelligent plastic forming equipment and production lines.

基金项目：

苑世剑（1963-），男，博士，教授，E-mail：syuan@hit.edu.cn

参考文献：

[1]苑世剑.轻量化成形技术[M]. 北京：国防工业出版社, 2010.

Yuan S J. Lightweight Forming Technology[M]. Beijing: National Defense Industry Press, 2010.

[2]林忠钦,李淑慧,王武荣,等.汽车板精益成形技术[J].中国工程科学, 2009, 11 (11): 22-29，36.

Lin Z Q, Li S H, Wang W R, et al. The lean forming technology for auto sheet metal[J]. Engineering Science, 2009, 11 (11): 22-29，36.

[3]杨合,孙志超,詹梅,等.局部加载控制不均匀变形与精确塑性成形研究进展[J].塑性工程学报,2008, 15 (2):6-14.

Yang H, Sun Z C, Zhan M, et al. Advances in control of unequal deformation by locally loading and theories related to precision plastic forming[J]. Journal of Plasticity Engineering, 2008, 15 (2):6-14.

[4]赵国群,王广春,赵振铎, 等.材料塑性成形过程最优化设计—Ⅱ灵敏度分析方法在模具设计中的应用[J].塑性工程学报,1999, 6（3）:1-6.

Zhao G Q, Wang G C, Zhao Z D, et al. Optimium design of material forming processes-Ⅱ Application of sensitivity analysis method in die design[J]. Journal of Plasticity Engineering, 1999, 6（3）:1-6.

[5]王新云,夏巨谌,陈志明,等.板冲锻成形新工艺及其在轿车飞轮盘加工中的应用[J].塑性工程学报,2008, 15 (4):180-184.

Wang X Y, Xia J C, Chen Z M, et al. Application of a new sheet stamptingforging hybrid technology in the forming of flying wheel panel of car[J]. Journal of Plasticity Engineering,2008,15 (4):180-184.

[6]苑世剑. 中国超大型塑性加工装备的发展[J].日本塑性加工学会会刊塑性と加工，2018，1（1）：14-15

Yuan S J. Development of ultra large metal forming presses in China[J]. Bulletin of the JSTP，2018，1（1）：14-15.

[7]苑世剑, 刘伟, 徐永超. 板材液压成形技术与装备新进展[J]. 机械工程学报, 2015, 51(8): 20-28.

Yuan S J, Liu W, Xu Y C. New development on technology and equipment of sheet hydroforming[J]. Journal of Mechanical Engineering, 2015, 51(8): 20-28.

[8]Chen Y Z, Liu W, Yu Y C, et al. Analysis and experiment on wrinkling suppression for hydroforming of curved surface shell[J]. International Journal of Mechanical Sciences, 2015, 104: 112-125.

[9]Hua L, Deng J D, Qian D S. Recent development of ring rolling theory and technique[J]. International Journal of Materials and Product Technology, 2017, 54 (1-3): 65-86.

[10]刘海霞, 颜永年, 曾攀, 等. 钢丝缠绕拱梁立柱全剖分-坎合机架[J]. 机械工程学报，2011, 47(4): 82-87.

Liu H X, Yan Y N, Zeng P, et al. Pillar and arched girder totally bumpy ridge joining frame with steel wire wound[J]. Journal of Mechanical Engineering, 2011, 47(4): 82-87.

[11]Jeswiet J, Geiger M, Engel U, et al. Metal forming progress since 2000[J]. CIRP Journal of Manufacturing Science and Technology, 2008, 1(1): 2-17.

[12]Tekkaya A E, Allwood J M, Bariani P F, et al. Metal forming beyond shaping: Predicting and setting product properties [J]. CIRP Annals, 2015, 64(2):629-653.

[13]Merklein M, Johannes M, Lechner M, et al. A review on tailored blanks-Production, applications and evaluation[J]. Journal of Materials Processing Technology, 2014, 214(2):51-164.

[14]Hu W L. A novel quadratic yield model to describe the feature of multiyieldsurface of rolled sheet metals[J]. Int. J. Plasticity, 2007, 23(12): 2004-2028.

[15]中国机械工程学会塑性工程分会.数控一代案例集: 塑性工程卷[M]. 北京：中国科学技术出版社，2016.

China Society for Technology of Plasticity，CMES. Cases of CNC Machinery Equipment: Plastic Engineering[M]. Beijing: Science and Technology of China Press, 2016.

服务与反馈：

【文章下载】【加入收藏】