锻压技术

基于响应面法的整体式结合齿齿轮温锻工艺优化

英文标题：Optimization on warm forging process for monoblock combined tooth gear based on response surface method

作者：吴先洋

分类号：TG315.2

出版年,卷(期):页码：2018,43(8):27-34

摘要：

针对整体式结合齿齿轮温锻过程成形载荷大、锻件充填不完整和模具磨损大等缺陷，以DCT250双离合自动变速器中某整体式结合齿齿轮作为研究对象，建立了以模具预热温度、坯料加热温度、摩擦因子和锻造速度为设计变量，以锻造过程成形载荷、齿形模具最大磨损量和锻件成形率为目标的二次多项式响应面模型。通过响应面法与有限元模拟相结合的方法对温锻过程的工艺参数进行优化，从而得到该产品的最优锻造工艺。经过实际生产验证发现，最优锻造工艺能够在较低成形载荷的条件下锻造出合格的锻件，并且齿形模具的使用寿命由最初的1000件提高至4500件，有效提高了齿形模具的使用寿命。

For the defects of over load, incomplete filling of forging and terrible die wear during warm forging process of monoblock combined tooth gear, the quadratic polynomial response surface model was built for a monoblock combined tooth gear of dual clutch automatic transmission DCT250, which took the pre-heating temperature of die, heating temperature of billet, friction coefficient and forging speed as the design variables, and took the forging load,maximum wear depth of tooth profile die and forming rate of forgings as the optimization goals. Combined the response surface method with finite element method, the process parameters of warm forging process were optimized, and the optimal forging process was obtained. The optimized process was verified by the actual production. The results show that the qualified forgings can be formed under lower forming load with the optimal forging process. Also, the life of tooth profile die is improved from 1000 parts to 4500 parts, which improves the life of tooth profile die effectively.

基金项目：

吴先洋（1990-），男，硕士，工程师 E-mail：xianyangw@sagw.com

参考文献：

［1］周煊，吴先洋，张海英，等. 基于正交试验法的齿类温锻件冲孔工艺优化
［J］. 锻压技术，2017，42（10）：19-25.

Zhou X，Wu X Y，Zhang H Y，et al. Optimization on piercing process of warm forging gear parts based on orthogonal experiment
［J］. Forging & Stamping Technology，2017，42（10）：19-25.

［2］谭险峰，谢保华，刘霞. 基于浮动凹模和约束分流的直齿轮精锻试验与数值模拟
［J］.塑性工程学报，2016，23(1)：7-10.

Tan X F，Xie B H，Liu X. Experiment and numerical simulation on precision forging for spur gear based on floating die and restrained split-flow
［J］. Journal of Plasticity Engineering, 2016，23(1)：7-10.

［3］赵海宾. 基于响应面汽车变速器螺旋伞齿轮精锻成形工艺优化
［J］.锻压技术，2016，41(4)：10-13.

Zhao H B. Process optimization of precision forging for auto transmission spiral bevel gears based on response surface
［J］. Forging & Stamping Technology，2016，41(4)：10-13.

［4］沈跃华, 陈磊, 陈俊臣, 等. 大模数圆柱直齿轮温锻成形工艺优化
［J］.热加工工艺, 2014, 43(3): 137-140.

Shen Y H，Chen L，Chen J C，et al. Optimization of warm forging forming technology of cylinder spur gear with big modulus
［J］. Hot Working Technology，2014，43(3)：137-140.

［5］占亮, 李霞, 孙礼宾, 等. 基于正交试验的曲轴热锻工艺参数优化
［J］.锻压技术，2014，39(7)：10-13.

Zhan L，Li X，Sun L B，et al. Design optimization of process parameters of crankshaft die forging based on orthogonal experiment
［J］. Forging & Stamping Technology，2014，39(7)：10-13.

［6］夏玉峰, 杨建兵, 田永生, 等. 基于响应面法的汽车离合器盘毂温锻-冷精整工艺多目标优化
［J］.中南大学学报: 自然科学版，2015，46(9)：3203-3210.

Xia Y F，Yang J B，Tian Y S，et al. Multi-object optimization of warm forging-cold sizing technology for automobile clutch disc-hub based on response surface model
［J］. Journal of Central South University:Science and Technology，2015，46(9)：3203-3210.

［7］佘文韬，樊文欣，史永鹏，等.基于响应曲面法的连杆衬套表面粗糙度预测模型和优化
［J］.塑性工程学报，2017，24(6)：172-176.

She W T，Fan W X，Shi Y P，et al. Prediction model and optimization of surface roughness of connecting rod bushing based on response surface method
［J］. Journal of Plasticity Engineering，2017，24(6)：172-176.

［8］Lee R S，Jou J L. Application of numerical simulation for wear analysis of warm forging die
［J］. Journal of Materials Processing Technology，2003，140(1)：43-48.

［9］Jahanmir S, Suh N P, Abrahamson E P. The delamination theory of wear and the wear of a composite surface
［J］. Wear，1975，32(1)：33-49.

［10］陈小刚, 陈贵清. 基于Archard理论的曲轴模具磨损研究
［J］.热加工工艺，2013，42(7)：125-127.

Chen X G, Chen G Q. Study on die wear of crankshaft based on Archard theory
［J］. Hot Working Technology，2013，42(7)：125-127.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】