锻压技术

错距旋压技术研究现状及发展方向

英文标题：Research progress and development trend of stagger spinning technology

分类号：TG376

出版年,卷(期):页码：2018,43(12):01-07

摘要：

错距旋压技术是在强力旋压技术基础上发展而来的回转成形方法，能够显著提高生产效率，改善产品表面质量和成形精度，细化晶粒，可用于成形大直径筒体、细长管、带台阶或内齿的异形筒体和纳米/超细晶粒筒形件。通过对近年来国内外学者开展的错距旋压试验和模拟研究进行综述，分析总结了各工艺参数对成形质量的影响规律，阐述了错距旋压成形的隆起、扩径及韧性损伤等主要缺陷产生的原因及改进措施，介绍了应用神经网络及回归分析等方法优化错距旋压成形工艺参数的研究现状，最后，指出了错距旋压的发展方向及尚待开展的工作。

The stagger spinning technology is a rotary forming method which is developed on the basis of power spinning technology, which can increase the production efficiency, improve the surface quality of products and refine grains significantly so as to form largediameter cylinders, slender tubes, irregular tubes with steps or internal teeth and nano/ultrafine grain cylinders. Therefore, the stagger spinning test and simulation study conducted by scholars in recent years were reviewed, and the influences of various process parameters on the forming quality were analyzed and summarized. Furthermore, the causes and improvement measures of main defects such as ridge, diameter expansion and toughness damage in the stagger spinning were described, and the research status of optimizing the parameters of stagger spinning process by neural network and regression analysis was introduced. Finally, the development trend and the work not yet done were pointed out.

基金项目：

基金项目:国家自然科学基金重点项目（51335009）

作者简介：韩冬(1966-)，男，工学博士，研究员 E-mail：736657131@qq.com

参考文献：

参考文献:

［1］李继贞,刘德贵,王健飞.强力旋压成形技术在航空领域的新进展
［J］.航空制造技术,2014，(10):40-44.

Li J Z, Liu D G, Wang J F. New progress of power spinning technology in aeronautics
［J］. Aeronautical Manufacturing Technology,2014，(10):40-44.

［2］王大力,郭亚明,王宇,等.镍基高温合金筒形件毛坯错距旋压工艺研究
［J］.新技术新工艺,2016，(2):12-15.

Wang D L, Guo Y M, Wang Y, et al. Research on stagger spinning process of nickelbase high temperature alloy tube blank
［J］. New Technology & New Process, 2016,(2):12-15.

［3］夏琴香. 梯形内齿旋压成形缺陷分析及工艺方法研究
［A］. 第十一届全国旋压技术交流大会论文集
［C］.成都：中国机械工程学会塑性工程（锻压）分会旋压学术委员会,2008.

Xia Q X. Research on defect analysis and technology of trapezoidal internal teeth spinning
［A］. Proceedings of the 11th National Spinning Technology Exchange Conference
［C］. Chengdu:China Mechanical Engineering Society Plastic Engineering (Forging) Branch Spinning Academic Committee,2008.

［4］杨保健. 强力错距旋压制备纳米/超细晶筒形件机理研究
［D］.广州：华南理工大学,2013.

Yang B J.Research on the mechanism of Preparation of Nano/Ultrafine Crystal Cylindrical Parts by Strong Offset Spinning
［D］. Guangzhou:South China University of Technology, 2013.

［5］Xia Q X. A study of manufacturing tubes with nano/ultrafine grain structure by stagger spinning
［J］. Materials & Design, 2014, 59 (6):516-523.

［6］Xiao G F, Xia Q X, Cheng X Q, et al. Research on the grain refinement method of cylindrical parts by power spinning
［J］. International Journal of Advanced Manufacturing Technology, 2014, 78 (5):1-9.

［7］Xiao G F, Xia Q X, Cheng X Q, et al. New forming method of manufacturing cylindrical parts with nano/ultrafine grained structures by power spinning based on small plastic strains
［J］.Science China Technological Sciences, 2016, 59 (11):1656-1665.

［8］张涛,樊文欣,席奇豪,等.错距旋压对连杆衬套硬度和微观组织的影响
［J］.热加工工艺,2017,46(15):151-153.

Zhang T,Fan W X,Xi Q H,et al. Influence of wrong spinning on the hardness and microstructure of rod bushing
［J］.Hot Working Technology,2017,46(15):151-153.

［9］张鹏. 错距旋压制备纳米/超细晶筒形件方法及试验研究
［D］.广州：华南理工大学,2012.

Zhang P. Method and Experimental Study on Preparation of Nano/Ultrafine Cylindrical Parts by Offset Spinning
［D］. Guangzhou: South China University of Technology, 2012.

［10］周宇静,程秀全,夏琴香.细长薄壁筒形件错距旋压成形工艺研究
［J］.轻合金加工技术,2011,39(8):30-34.

Zhou Y J, Cheng X Q, Xia Q X. Research on stepped spinning process of long and slim thinwall tube
［J］. Light Alloy Fabrication Technology, 2011,39(8):30-34.

［11］周照耀,吕炎,赵宪明,等.筒形件错距旋压工艺的试验研究
［J］.材料科学与工艺,1995,(2):100-105.

Zhou Z Y, Lyu Y, Zhao X M, et al. Stepped spinning experimental study on cylindrical workpieces
［J］. Material Science and Technology, 1995,(2):100-105.

［12］夏琴香,张鹏,程秀全,等.筒形件错距旋压成形工艺参数的正交试验研究
［J］.锻压技术,2012,37(6):42-46.

Xia Q X, Zhang P, Cheng X Q, et al. Orthogonal experimental study on forming process parameters of tube stagger spinning
［J］. Forging & Stamping Technology, 2012,37(6):42-46.

［13］吕伟,樊文欣,陈东宝,等.筒形件错距旋压圆度误差研究
［J］.锻压技术,2016,41(7):57-61.

Lyu W, Fan W X, Cheng D B, et al. Research on roundness error of cylinder stagger spinning
［J］. Forging & Stamping Technology, 2016,41(7):57-61.

［14］张锐. 35CrMnSiA薄壁筒形件错距旋压成形工艺研究
［A］. 第十一届全国旋压技术交流大会论文集
［C］.成都：中国机械工程学会塑性工程（锻压）分会旋压学术委员会,2008.

Zhang R. Research on the wrong spin forming process of 35CrMnSiA thinwalled tubular parts
［A］. Proceedings of the 11th National Spinning Technology Exchange Conference
［C］. Chengdu:China Mechanical Engineering Society Plastic Engineering (Forging) Branch Spinning Academic Committee,2008.

［15］杨毅刚,张立武,韩冬.30CrMnSiA钢薄壁筒错距旋压成形工艺研究
［J］.金属成形工艺,2004,22(2):64-66.

Yang Y G, Zhang L W, Han D. Research on stagger spinning forming process of 30CrMnSiA steel feathered tube
［J］. Metal Forming Technology, 2004,22(2):64-66.

［16］张宁,檀雯,李永华,等.筒形件错距旋压数值模拟及旋压力分析
［J］.沈阳理工大学学报,2009,28(5):55-58.

Zhang N, Tan W, Li Y H, et al. Numerical simulation and spinning force analysis for tube stagger spinning
［J］. Transactions of Shenyang Ligong University, 2009,28(5):55-58.

［17］高曙,仇梅香.强力旋压轴向错距的精确计算
［J］.锻压技术,1994,29(5):46-49.

Gao S, Qiu M X.Accurate calculation of strong spinning axial offset
［J］.Forging & Stamping Technology,1994,29(5):46-49.

［18］周照耀,吕炎,赵宪明,等.大直径30CrMnSiA薄壁筒形件的错距旋压
［J］.哈尔滨工业大学学报,1997,29(4):107-110.

Zhou Z Y, Lyu Y, Zhao X M, et al. Stepped spinning of largediameter thinwall 30CrMnSiA workpieces
［J］. Journal of Harbin Institute of Technology, 1997,29(4):107-110.

［19］何芳,贾江宏,王静薇,等.T250钢筒形件错距正旋工艺研究
［J］.航天制造技术,2015,(3):32-34.

He F, Jia J H, Wang J W, et al. Study on stagger forward spinning technology of T250 steel tube
［J］. Aerospace Manufacturing Technology, 2015,(3):32-34.

［20］Shan D B. Experimental study on process of coldpower spinning of Ti153 alloy
［J］.Journal of Materials Processing Technology，2001, 115 (3):380-383.

［21］刘成. Hastelloy C-276合金管材旋压成形数值模拟及实验研究
［D］.北京:有色金属研究总院,2016.

Liu C. Numerical Simulation and Experimental Study on Spinning of Hastelloy C-276 Alloy Pipe
［D］. Beijing:Research Institute of Nonferrous Metals, 2016.

［22］Li Y, Wang J, Lu G D. Threedimensional finite element analysis of effects of roller intervals on tool forces and wall thickness in stagger spinning of thinwalled tube
［J］.Mechanical Engineering Science,2013,227 (7):1429-1440.

［23］李永华,张宁,檀雯,等.不锈钢筒形件错距旋压过程的缺陷研究
［J］.锻压技术,2009,34(6):32-34.

Li Y H, Zhang N, Tan W, et al. Research on defects of stainless steel tube stagger spinning process
［J］.Forging & Stamping Technology, 2009,34(6):32-34.

［24］林新波,翟福宝,张质良,等.筒形件错距旋压缺陷的有限元仿真研究
［J］.锻压技术,2002,27(4):40-43.

Lin X B, Zhai F B, Zhang Z L, et al. Research on stagger spinning defects of tube parts by FEM
［J］. Forging & Stamping Technology, 2002,27(4):40-43.

［25］檀雯. 1Cr18Ni9不锈钢筒形件错距旋压研究
［D］.沈阳：沈阳理工大学,2009.

Tan W. Study on the Wrong Spinning of 1Cr18Ni9 Stainless Steel Tubular Parts
［D］. Shenyang:Shenyang Ligong University, 2009.

［26］Wang J, Ge T, Lu G D, et al. A study of 3D finite element modeling method for stagger spinning of thinwalled tube
［J］. Zhejiang UnivSci. A (Appl. Phys. & Eng.), 2016,17(8):646-666.

［27］Xia Q X, Cheng X Q, Long H, et al. Finite element analysis and experimental investigation on deformation mechanism of nonaxisymmetric tube spinning
［J］. International Journal of Advanced Manufacturing Technology, 2012, 59 (1-4):263-272.

［28］薛克敏,夏永江,许沂,等.筒形件错距旋压工艺参数选择专家系统
［J］.中国有色金属学报,1998,8(S1):173-176.

Xue K M, Xia Y J, Xu Y, et al. Inverter technology parameter selection expert system for cylinder offset distance
［J］. The Chinese Journal of Nonferrous Metals, 1998,8(S1):173-176.

［29］王宾,秦建平,王福利,等.不锈钢管冷旋压热力耦合有限元模拟
［J］.精密成形工程,2011,3(5):31-34.

Wang B, Qin J P， Wang F L, et al. FEM coupled thermalmechanical simulation of cold spinning of stainless steel pipe
［J］. Journal of Netshape Forming Engineering,2011,3(5):31-34.

［30］赵宪明,吕炎,李克智,等.LY12大直径薄壁筒错距旋压工艺参数的优化计算
［J］.塑性工程学报,1995,2(4):40-45.

Zhao X M, Lyu Y, Li K Z, et al. Optimum calculation of technical parameters on stagger spinning of LY12 tube with big diameter and thinwall
［J］. Journal of Plasticity Engineering, 1995,2(4):40-45.

［31］程秀全,吴万敏,张鹏,等.筒形件错距旋压成形工艺参数优化
［J］.塑性工程学报, 2012,19 (5):104-108.

Cheng X Q, Wu W M, Zhang P, et al. Optimization of process parameters for tubular parts stagger spinning
［J］. Journal of Plasticity Engineering, 2012,19(5):104-108.

［32］翟福宝,张质良,夏萼辉,等.基于有限元模拟的筒形件错距旋压智能参数优化系统研究
［J］. 锻压装备与制造技术, 2000, 35 (2):44-45.

Zhai F B, Zhang Z L, Xia E H, et al. Research on intelligent parameters optimization based on FEA simulation of tube stagger spinning
［J］. China Metalforming Equipment & Manufacturing Technology, 2000，35(2):44-45.

［33］翟福宝,李帆,张质良,等.筒形件错距旋压的有限元分析及其工艺优化系统
［J］.上海交通大学学报,2002，36(4):445-448.

Zhai F B, Li F,Zhang Z L,et al. Finite element analysis and process optimization system of the tube stagger spinning
［J］. Journal of Shanghai Jiaotong University, 2002,36(4):445-448.

［34］杨锋,樊文欣,汤传尧,等.基于Simufact锡青铜连杆衬套错距旋压灰色关联度优化
［J］.特种铸造及有色合金,2018,38(1):82-84.

Yang F, Fan W X, Tang C Y, et al. Optimization of the gray correlation degree of connecting rod bush and dip distance spinning based on simufact software
［J］. Special Casting & Nonferrous Alloys, 2018,38(1):82-84.

服务与反馈：

【文章下载】【加入收藏】