锻压技术

U型冷却对先进高强钢酸轧轧制力波动行为的影响

英文标题：Influence of Utype cooling on rolling force fluctuation behavior in acid rolling for advanced highstrength steel

单位：1.首钢京唐钢铁联合有限责任公司制造部 2. 首钢集团有限公司技术研究院薄板研究所

分类号：TG335.5

出版年,卷(期):页码：2018,43(12):0-0

摘要：

针对某酸连轧产线生产高硅牌号DP780双相钢过程出现的头尾轧制力及厚度波动问题，从全流程生产工艺及钢种组织性能特性两方面进行了研究。研究表明，热轧头尾温度均匀性不一致，导致带钢头尾性能分布不均，造成了酸轧轧制力波动。通过对热轧工序采取卷取过程U型冷却工艺方式，提高了DP780双相钢头尾卷取温度，降低了热轧卷取过程出现的头尾与带体间的冷却差异性，有效改善了汽车高强钢在酸连轧生产过程中出现的轧制力及厚度波动现象。与原工艺相比，该高硅牌号DP780双相钢头尾轧制力降低约2500 kN，且提高了轧制力稳定性，降低了头尾厚度波动，有效提升了酸连轧生产节奏。

For the problem of headtail rolling force and thickness fluctuation in the process of producing high silicon DP780 dual phase steel by PL-TCM, the whole production process and steel structure and property characteristics were studied. The research shows that the inconsistent temperature uniformity of hot rolling head and tail results in the uneven distribution of strip head and tail properties as well as acid rolling force fluctuation. By adopting the Utype cooling method in the coiling process for the hot rolling operation, the coiling temperature of head and tail for DP780 dual phase steel is increased, and the cooling difference among the head, tail and belt body in the coiling process of hot rolled steel is reduced. Thus, the rolling force and thickness fluctuation phenomenon of automobile highstrength steel in the acid continuous rolling process are effectively improved. Compared with the original process, the rolling force of head and tail for high silicon DP780 dual phase steel is reduced by about 2500 kN, and the rolling force stability is obviously improved. Furthermore, the thickness fluctuation of head and tail is obviously improved, and the production efficiency is improved effectively.

基金项目：

作者简介：王章岭（1986-），男，硕士，工程师 Email：wzllp0524@163.com

参考文献：

参考文献:

［1］李永兵，李亚庭，楼铭，等.轿车车身轻量化及其对连接技术的挑战
［J］.机械工程学报，2012,48（18）：44-54.

Li Y B, Li Y T,Lou M，et al. Light weighting of car body and its challenges to joining technologies
［J］. Journal of Mechanical Engineering, 2012,48（18）：44-54.

［2］宋勇，荆丰伟，殷实，等.厚规格热轧带钢高精度卷取温度控制模型
［J］.工程科学学报，2015,37（1）：106-110.

Song Y, Jing F W, Yin S,et al. Highprecision coiling temperature control model for heavy gauge strip steel
［J］. Chinese Journal of Engineering，2015,37（1）：106-110.

［3］孟宪明，谢书港，方锐，等.B340590DP双相高强钢板的动态变形行为
［J］.钢铁研究学报，2015,27（6）:51-55.

Meng X M, Xie S G, Fang R,et al. Dynamic deformation behavior of B340590DP steel sheet
［J］.Journal of Iron and Steel Research，2015,27（6）:51-55.

［4］羊军，胡伟，王武荣，等.1000 MPa级DP钢的准静态拉伸行为与应变速率的关系
［J］.钢铁研究学报，2011，23（7）：39-42.

Yang J, Hu W,Wang W R,et al. Relationship between strain rate and quasi static tensile behavior of 1000 MPa DP steel
［J］. Journal of Iron and Steel Research，2011，23（7）：39-42.

［5］郭延明，王桂新，冯建航，等.应变速率对FeMnSiCrNi合金组织和力学性能的影响
［J］.钢铁研究学报，2011，23（9）：50-54.

Guo Y M,Wang G X,Feng J H,et al. Effect of strain rate on microstructure and mechanical properties of the FeMnSiCrNi alloy
［J］. Journal of Iron and Steel Research，2011，23（9）：50-54.

［6］黄全伟，宋仁伯，周乐育，等.700 MPa级热轧双相钢的组织和性能
［J］.钢铁研究学报，2009，21(8): 21-24.

Huang Q W, Song R B, Zhou L Y, et al. Microstructure and property of 700 MPa grade hot rolled dual phase steel
［J］. Journal of Iron and Steel Research，2009，21（8）：21-24.

［7］叶洁云，安桂焕，刘姗姗，等.卷取温度对深冲DP钢组织性能及织构的影响
［J］. 钢铁，2016,51（12）:74-79.

Ye J Y, An G H, Liu S S,et al. Effect of hotrolled coiling temperature on microstructure，properties and textures of microcarbon deepdrawing DP steel
［J］. Iron and Steel，2016,51（12）:74-79.

［8］王卫卫，李光灜，张江玲，等.含铌冷轧DP780钢的连退工艺对组织及性能的影响
［J］. 钢铁，2016,51（6）:71-75.

Wang W W， Li G Y， Zhang J L, et al. Effect of continuous annealing process on microstructure and properties of DP780 containing niobium
［J］.Iron and Steel，2016,51（6）:71-75.

［9］董方，武利平，宿成，等．卷取后冷却工艺对700 MPa微合金钢带材组织和性能的影响
［J］. 特殊钢，2017，38（5）:61-64.

服务与反馈：

【文章下载】【加入收藏】