锻压技术

基于ADAMS的伺服压力机三角肘杆式工作机构优化设计

英文标题：Optimized design of triangle toggle working mechanism for servo press based on ADAMS

作者：胡建国孙友松章争荣程永奇

单位：（1. 顺德职业技术学院智能制造学院广东佛山 528333 2. 广东工业大学材料与能源学院广东广州 510006 ）

分类号：TP273

出版年,卷(期):页码：2019,44(2):126-132

摘要：

为了提高伺服压力机三角肘杆式工作机构的机械利益，基于ADAMS软件，提出一种定性-定量设计方案，优化三角肘杆式工作机构。首先，对工作机构进行简化分解分析，提出若干定性的设计建议，以快速获得工作机构的基本结构构型、设计参数初始值与边界值。然后，在ADAMS软件中建立参数化虚拟样机和优化模型，并进行求解计算获得优化值。最后，根据已知尺度和优化值，对优化前后的工作机构进行仿真计算和性能分析。结果表明，优化设计后的三角肘杆式工作机构具有更优良的运动特性和增力特性，验证了定性-定量设计方案的可行性。

In order to enhance the mechanical advantage of triangle toggle working mechanism for servo presses, a qualitative and quantitative design scheme was proposed to optimize the triangle toggle working mechanism based on software ADAMS. First, a simplified decomposition analysis of the working mechanism was conducted, and some suggestions for qualitative design were made to quickly obtain basic structure configuration, initial values and boundary values of the design parameters. Then, a parameterized virtual prototype model and an optimal design model were built based on software ADAMS, and the optimal values were obtained by solving calculation. Finally, according to the known sizes and optimal values, simulation calculations and performance analysis for the working mechanism before and after optimization were conducted. The results show that the working mechanism after optimization has better kinematic characteristic and forceenlarging characteristic, and the qualitative and quantitative design scheme is validated as feasible.

基金项目：

基金项目:佛山市智能制造工程技术研究中心资助项目（2017-KJZX080）

作者简介：胡建国（1979-），男，博士，副教授 Email：jghu-sd@139.com

参考文献：

［1］Osakada K, Mori K, Altan T, et al. Mechanical servo press technology for metal forming
［J］. CIRP AnnalsManufacturing Technology, 2011,60(11):651-672.

［2］孙友松,程永奇,胡建国,等. 交流伺服机械压力机在金属塑性成形加工中的应用(I)——板料成形
［J］.锻压技术,2018,43(10):1-12.

Sun Y S, Cheng Y Q, Hu J G, et al. Application of AC servo mechanical press in metal plastic forming (I)Sheet metal forming
［J］.Forging & Stamping Technology, 2018,43(10):1-12.

［3］赵升吨,陈超,崔敏超, 等.交流伺服压力机的研究现状与发展趋势
［J］.锻压技术,2015,40(2):1-8.

Zhao S D, Cheng C, Cui M C, et al. Research status and development tendency of AC servo press
［J］. Forging & Stamping Technology, 2015,40(2):1-8.

［4］何德誉.曲柄压力机
［M］.北京:机械工业出版社，1981.

He D Y. Crank Type Presses
［M］. Beijing:China Machine Press,1981.

［5］李名尧,龚红英,赵中华.椭圆齿轮传动压力机的运动特性分析
［J］.锻压技术,2006,31(6):87-92.

Li M Y, Gong H Y, Zhao Z H. Kinematic characteristic of press with ellipse gear transmitting
［J］. Forging & Stamping Technonogy,2006,31(6):87-92.

［6］贵新成，詹隽青，赵重年，等.一种非圆齿轮差动无级变速传动设计
［J］.机械设计,2018,35(9):100-104.

Gui X C, Zhan J Q, Zhao Z N, et al. Design of the differential infinitelyvariable transmission with noncircular gears
［J］. Journal of Machine Design, 2018,35(9):100-104.

［7］王苏号.非圆带轮传动在压力机上的应用研究
［D］.南京:东南大学,2008.

Wang S H. Application of Noncirular Belt Transmission in Mechanical Press
［D］. Nanjing:Southeast University,2008.

［8］梁善飞,李志威,李云涛, 等.基于EXCITE_TD的正时皮带系统非圆带轮选型的动力学计算
［J］.汽车实用技术,2017,(1):29-31.

Liang S F, Li Z W, Li Y T, et al., Non circle belt pulley dynamic calculate by EXCITE_TD
［J］. Automobile Applied Technology, 2017,(1):29-31.

［9］Hwang W M, Hwang Y C, Chiou S T. A draglink drive of mechanical presses for precision drawing
［J］. Machine Tools and Manufacture, 1995, 35(10):1425-1433.

［10］杜威,赵升吨,金利英.采用NSGA_II多目标优化算法的机械压力机三角形肘杆机构优化设计
［J］. 锻压技术,2018,43(11):77-82.

Du W, Zhao S D, Jin L Y. Optimization design on triangle elbow bar mechanism of mechanical press using NSGA_Ⅱ multiobjective optimization algorithm
［J］. Forging & Stamping Technology, 2018,43(11):77-82.

［11］Dijksman E A. Sixbar cognates of a Sthephenson mechanism
［J］. Jnl. Mechanisms, 1971,(6):31-57.

［12］陈新德.基于ADAMS的机械压力机六连杆机构的优化设计
［J］.机械设计,2016,40(6):97-102.

Chen X D. Optimization design of mechanical press machine sixlink mechanism based on ADAMS
［J］. Journal of Machine Design, 2016,40(6):97-102.

服务与反馈：

【文章下载】【加入收藏】