锻压技术

5A06铝合金T型变管径半管冷冲压成形工艺

英文标题：Cold stamping process of 5A06 aluminum alloy T-shaped semi-pipe with

作者：高辉刘波李小曼肖家源龚强王本安

分类号：V261.2+8

出版年,卷(期):页码：2019,44(3):36-40

摘要：

对5A06铝合金T型变管径半管冷冲压成形工艺进行优化，利用Dynaform有限元方法对零件成形过程进行有限元模拟仿真，并对其中零件毛料尺寸和凹模圆角进行了详细的分析，优化了工艺及工装参数，结果表明，不规则六边形下料尺寸比长方形更加利于零件成形，避免了在凹模圆角与型面过渡区处产生裂纹；凹模圆角半径为R10 mm时，可成形出满足使用要求的合格零件。运用实验进行验证，实验结果与有限元模拟仿真结果相符，证明了模拟的正确性。

The cold stamping process of 5A06 aluminium alloy T-shaped semi-pipe with variable diameter was optimized, and the forming process of the part was simulated by software Dynaform. Then, the blank size and die fillet of the part were analyzed in detail, and the process and tooling parameters were optimized. The results show that irregular hexagonal blanking size is more advantageous to part forming than rectangular blanking size to avoid cracking at the fillet and the transition zone of die surface. When the die radius is R10 mm, the qualified parts can be formed to meet the requirements. The experiment was used to verify that the experimental results are consistent with the finite element simulation results, which proves the correctness of the simulation.

基金项目：

高辉（1988-），男，硕士，助理工程师，E-mail：confident_gh@163.com

参考文献：

［1］柏立敬, 冯再新, 张治民. 5A06铝合金变形工艺参数与显微组织关系实验研究
［J］. 有色金属加工, 2007, 36(6):14-16.

Bai L J, Feng Z X, Zhang Z M. Experimental research on relationship between deformation factors and microstructures of 5A06 aluminum alloy
［J］. Nonferrous Metals Processing, 2007, 36(6):14-16.

［2］Liu G, Peng J, Yuan S, et al. Analysis on critical conditions of sidewall wrinkling for hydroforming of thin-walled tee-joint
［J］. International Journal of Machine Tools & Manufacture, 2015, 97:42-49.

［3］贾春莉, 张杰刚, 张玉强,等. 基于PAM-STAMP三通半管拉深成形工艺的模拟
［J］. 热加工工艺, 2012, 41(3):95-99.

Jia C L, Zhang J G, Zhang Y Q, et al. Numerical simulation of drawing process for half-three-way tube based on PAM-STAMP
［J］.Hot Working Technology,2012, 41(3):95-99.

［4］鲜小红. 基于Dynaform的印涂铝盖冲压拉深模具间隙的数字化设计技术
［J］. 锻压技术, 2017,42(1):41-46.

Xian X H. Digtalized design technology of drawing die clearance for printed and coated aluminum covers based on Dynaform
［J］. Forging & Stamping Technology, 2017,42(1):41-46.

［5］雷君相. 圆锥形零件冲压成形皱曲和破裂三极限的预报与控制
［J］. 钢铁研究学报, 1999, 11(3):19-24.

Lei J X. Prediction and control of the limits of wrinkle and fracture during deep drawing parts with the shape of tapered shell
［J］. Journal of Iron and Steel Research, 1999, 11(3):19-24.

［6］谢晖. 薄板冲压成型中板料起皱的临界应力分析和预测
［J］. 计算力学学报, 2003, 20(1):95-100.

Xie H. Analysis and prediction of the critical stress in sheet metal forming
［J］. Chinese Journal of Computational Mechanics, 2003, 20(1):95-100.

［7］GB/T 228.1—2010,金属材料室温拉伸试验方法
［S］.

GB/T 228.1—2010,Metallic materials—Tensile testing at room temperature
［S］.

［8］李泷杲. 金属板料成形有限元模拟基础
［M］. 北京：北京航空航天大学出版社, 2008.

Li L G. Finite Element Simulation Foundation of Sheet Metal Forming
［M］. Beijing: Beihang University Press, 2008.

［9］Ni H Q, Liu X H, Wang G D. Numerical simulation of sheet metal stamping process
［J］. China Metal Forming Equipment & Manufacturing Technology, 2004, (4):80-83.

［10］Gontier C. About the numerical simulation of the sheet metal stamping process
［J］. International Journal for Numerical Methods in Engineering, 2010, 37(4):669-692.

［11］Ahmed M, Sekhon G S, Singh D. Finite element simulation of sheet metal forming processes
［J］. Defence Science Journal, 2005, 55(4):389-401.

［12］崔丽, 巫永坤, 樊彬彬,等. 铝合金曲面斜法兰罩盖成形工艺的数值模拟与试验研究
［J］. 锻压技术, 2017, 42(7):77-83.

Cui L,Wu Y K, Fan B B,et al. Numerical simulation and experimental investigation on forming process for aluminum alloy cover with curved oblique flange
［J］.Forging & Stamping Technology,2017, 42(7):77-83.

服务与反馈：

【文章下载】【加入收藏】