锻压技术

大型高压筒体钢丝预应力缠绕微应变测量

英文标题：Micro strain measurement of large high-pressure cylinders with pre-stressed steel wire winding

作者：李宛洲崔晨星蚌绍诗黄路明

分类号：TP274+5

出版年,卷(期):页码：2019,44(3):115-121

摘要：

大型高压筒体钢丝预应力缠绕是超长缓变过程，筒体内壁微应变最小为40 με，相邻缠绕层之间的应变差最小为10 με，因而要求测量系统必须具有高精度、实时性两个特征。首创互联网环境下的高精度实时在线微应变测量方法，通过对筒体微应变过程进行分析，搭建能够实时监测并通过网络传输的应变测量系统，实现对缠绕过程的远程监控。将此方法应用于我国首台770 MN橡皮囊液压成形机（简称770）筒形机架钢丝预应力缠绕过程控制，通过对应变数据的分析验证了方法的有效性。同时，还提出了生产过程在线监测筒体形变的方法，对100 MPa成形压力下的筒体形变数据进行采集和对比分析，为高压筒体健康诊断提供了保障。

Pre-stressed steel wire winding of large high-pressure cylinders is a long and slow process with minimal strain 40 με of the cylinder inner wall and minimal differential stress 10 με between adjacent winding layers, and the measurement system must have two characteristics of high precision and real-time performance. Then, the precision micro strain online measuring method was created by the internet, and the remote monitoring of the winding process was realized by analysis the micro strain process of the cylinder and setting up a strain measurement system monitored in real time and transmitted over a network. Applying the above method to the pre-stressed winding process control of the cylindrical frame for the first 770 MN rubber diaphragm hydroforming machine (abbreviated as 770) made in China, the effectiveness of the method was verified by analysis strain data. At the same time, a method of on-line monitoring the deformation of the cylinder in the production process was put forward, and the deformation data of the cylinder under 100 MPa forming pressure were collected and analyzed comparatively. Thus, a guarantee for the health diagnosis of the high-pressure cylinder was provided.

基金项目：

李宛洲（1958-），男，博士，副教授，E-mail：lwz@tsinghua.edu.cn

参考文献：

［1］Gronbaek J, Wanheim T. Optimum design of ribbon and wire wound cylinders for metal forming dies
［J］. Journal of Engineering for Industry, 1977, 99(3): 733-737.

［2］颜永年. 预应力钢丝缠绕超高压筒体的应力及变形分析
［J］. 清华大学学报: 自然科学版, 1978, 18(2): 86-110.

Yan Y N. Analysis on the stress and deformation of cylinder with ultra pressure wrapped by pre-stressing steel wires
［J］. Journal of Tsinghua University：Science and Technology, 1978，18(2): 86-110.

［3］颜永年, 俞新陆. 机械设计中的预应力结构
［M］. 北京：机械工业出版社, 1989.

Yan Y N, Yu X L. Prestressed Structures of Mechanical Design
［M］. Beijing: China Machine Press, 1989.

［4］张浩然, 张人佶, 颜永年, 等. 250 MN 钢丝预紧式主缸受力计算与模拟
［J］. 清华大学学报: 自然科学版, 2010，50(2): 182-186.

Zhang H R, Zhang R J, Yan Y N, et al. Computation and simulations of a 250 MN main cylinder prestressed by wires
［J］. Journal of Tsinghua University：Science and Technology, 2010，50(2): 182-186.

［5］王雅辉. 预应力钢丝缠绕式模锻压力机研究
［D］. 秦皇岛：燕山大学, 2014.

Wang Y H. Research on Prestressed Steel Wire Spiral Wound Die Forging Hydraulic Press
［D］. Qinhuangdao: Yanshan University, 2014.

［6］刘遵飞. 钢带缠绕式等静压机关键技术研究
［D］. 重庆:重庆交通大学, 2013.

Liu Z F. Research on Key Technology of Wire-winding Isostatic Pressing Machine
［D］. Chongqing: Chongqing Jiaotong University, 2013.

［7］夏卫明,骆桂林,嵇宽斌.50 MN预应力钢丝缠绕液压缸关键技术参数的确定
［J］.锻压技术,2017,42(2):93-99.

Xia W M, Luo G L, Ji K B. Determination on key technical parameters for prestressed steel wire-wound hydraulic cylinder 50 MN
［J］. Forging & Stamping Technology,2017,42(2):93-99.

［8］张凌云,李安平,范作鹏,等.橡皮囊一步法成形补偿系统开发及板料的试验验证
［J］.锻压技术,2018,43(3):36-41.

Zhang L Y, Li A P, Fan Z P, et al. Development of one step shaping compensation system for rubber bladder and test verification of sheet metal
［J］. Forging & Stamping Technology,2018,43(3):36-41.

［9］Quintus technologies. Sheet Metal Forming
［EB/OL］. http://quintustechnologies.com/metal-forming/, 2016-03-18.

［10］戴美云, 周贤宾. 高压橡皮囊成形工艺及应用 (上)
［J］. 航空工程与维修, 1994, (9): 13-15.

Dai M Y, Zhou X B. High pressure rubber bag forming process and application
［J］. Aviation Maintenance & Engineering, 1994, (9): 13-15.

［11］颜永年. 预应力钢丝缠绕筒体的设计计算
［J］. 清华大学学报: 自然科学版, 1978,18(4): 106-119.

Yan Y N. Design of wire winding prestressed cylinder under high internal pressure
［J］. Journal of Tsinghua University：Science and Technology, 1978,18(4): 106-119.

［12］蚌绍诗. 770 MN橡皮囊液压成形机筒体预应力缠绕方法研究
［R］. 北京：清华大学, 2017.

Bang S S. Method Research of Cylinder Prestressed Winding of 770 MN Rubber Hydroforming Machine
［R］. Beijing: Tsinghua University, 2017.

［13］Jiang Q, Zhang F. Dynamic strain measurement system based on LabVIEW
［J］. Foreign Electronic Measurement Technology, 2010, (7): 40-44.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】