锻压技术

挤压态ZK61M镁合金热压缩变形行为与本构方程建立

英文标题：Hot compression deformation behavior of extruded ZK61M magnesium alloy  and establishment of constitutive equation

作者：陈祥龙徐春国秦思晓任伟伟占克勤

单位：1.北京机电研究所有限公司北京 100083 2.湖北三环锻造有限公司湖北襄阳 441700

关键词：ZK61M镁合金变形镁合金热压缩流变应力本构方程

分类号：TG146.2

出版年,卷(期):页码：2019,44(5):147-153

摘要：

为研究挤压态ZK61M镁合金的热变形行为，采用Gleeble3800热模拟机在温度为300~450 ℃、应变速率为0.001~0.5 s-1的条件下进行热压缩实验，分析了变形温度、应变速率对流变应力的影响，并对铸态镁合金和挤压态镁合金的变形激活能进行了研究对比，最终将本构方程应用于模拟软件中进行量化验证。结果表明，该合金的流变应力与变形温度负相关，与应变速率正相关，应力-应变曲线拥有动态回复和再结晶的特点。MgZnZr系变形镁合金相对类似成分的铸造镁合金，具有更低的变形激活能，如ZK61M，大约为120 kJ·mol-1, 且MgZnZr系镁合金成分是决定变形激活能大小的主要因素，成分相同时，材料的变形激活能基本相近，模拟曲线与实验曲线趋势具有一致性，应力峰值接近。通过Arrenhenius本构方程计算出挤压态ZK61M镁合金的变形激活能Q=122.685 kJ·mol-1，应力指数n=4.13652，为MgZnZr系变形镁合金的热加工工艺参数和制备提供了理论指导。

In order to study the hot deformation behavior of extruded ZK61M magnesium alloy, the hot compression test under the condition of the temperature of 300-450 ℃ and the strain rate of 0.001-0.5 s-1 was carried out by Gleeble3800 thermal simulator, and the effects of deformation temperature and strain rate on the flow stress were analyzed. And the deformation activation energies of cast magnesium alloy and extruded magnesium alloy were studied and compared, and the constitutive equation was finally applied to the simulation software for quantitative validation. The results show that the flow stress of alloy is negatively correlated with the deformation temperature and positively correlated with the strain rate. The stressstrain curves are found to have the characteristics of dynamic recovery and recrystallization. Compared with the cast magnesium alloy of similar components, the deformation activation energy of MgZnZr wrought magnesium alloy is lower, like ZK61M, it is about 120 kJ·mol-1. And for MgZnZr magnesium alloys, the alloy composition is the main factor that determines the value of deformation activation energy, when the compositions are same, the deformation activation energies are basically similar. Both the simulated curve and the test curve have the same trend, and the peak stresses are [JP2]closed. Applied by Arrenhenius equation, the deformation activation energy of extruded ZK61M magnesium alloy is Q=122.685 kJ·mol-1, and the stress exponent is n=4.13652,[JP] which provides theoretical guidance for the thermal processing parameters and preparation of MgZnZr wrought magnesium alloy.

基金项目：

作者简介：陈祥龙（1993-），男，硕士研究生 Email：chxlcorp2018@163.com 通讯作者：徐春国（1970-），男，博士，研究员，博士生导师 Email: 13910082751@163.com

参考文献：

［1］张迪, 刘运腾, 林涛，等. 挤压态ZK60镁合金的热压缩变形行为
［J］.金属热处理,2018,43(1):33-37.

Zhang D, Liu Y T, Lin T, et al. Hot compression deformation behavior of extruded ZK60 magnesium alloy
［J］. Heat Treatment of Metals, 2018,43(1):33-37.〖ZK)〗

［2］毛建军, 潘复生, 陈先华，等. ZK60镁合金的热压缩变形行为
［J］.材料导报,2010,24(4):58-62.

Mao J J, Pan F S, Chen X H, et al. Hot compression deformation behavior of ZK60 magnesium alloy
［J］.Materials Reports, 2010,24(4):58-62.[ZK)]

［3］周江, 刘科研, 金龙兵，等.ZK61M镁合金锻件锻造工艺研究
［J］.轻合金加工技术,2010,38(5):36-38.

Zhou J, Liu K Y, Jin L B, et al. Research on forging process of 〖LL〗ZK61M magnesium alloy forgings
［J］. Light Alloy Fabrication Technology, 2010,38(5):36-38.[ZK)]

［4］Ulacia I, Salisbury C P, Hurtado I, et al. Tensile characterization and constitutive modeling of AZ31B magnesium alloy sheet over wide range of strain rates and temperatures
［J］.Journal of Materials Processing Technology,2011,211(5):830-839.[ZK)]

［5］Mirzadeh H. Constitutive analysis of MgAlZn magnesium alloys during hot deformation
［J］. Mechanics of Materials,2014,77(5):80-85.[ZK)]

［6］Mirzadeh H. Constitutive behaviors of magnesium and MgZnZr alloy during hot deformation
［J］.Materials Chemistry and Physics, 2015,152(5):123-126.[ZK)]

［7］Ahmad I R, Shu D W. Compressive and constitutive analysis of AZ31B magnesium alloy over a wide range of strain rates
［J］. Materials Science and Engineering,2014,592(5):40-49.[ZK)]

［8］Wang L X, Fang G, Leeflang M A, et al. Constitutive behavior and microstructure evolution of the asextruded AE21 magnesium alloy during hot compression testing
［J］.Journal of Alloys and Compounds,2015,622(5):121-129.[ZK)]

［9］李慧中, 卫晓燕, 梁霄鹏, 等. 挤压态AZ80镁合金的塑性变形行为
［J］.粉末冶金材料科学与工程,2014,19(1):31-38.

Li H Z. Wei X Y, Liang X P, et al. Plastic deformation behaviors of asextruded AZ80 magnesium alloy
［J］. Materials Science and Engineering of Powder Metallurgy, 2014,19(1):31-38.[ZK)]〖JP〗

［10］刘少飞, 屈银虎, 王崇楼，等. 金属和合金高温变形过程本构模型的研究进展
［J］.材料[JP]导报,2018,32(13):2241-2251.

Liu S F, Qu Y H, Wang C L, et al. Advances in constitutive models of metals and alloys during hot deformation
［J］. Materials Reports, 2018,32(13):2241-2251.[ZK)]

［11］Yu H, Yu H S, Min G H, et al. Straindependent constitutive analysis of hot deformation and hot workability of T4treated ZK60 magnesium alloy
［J］.Metals and Materials International,2013,19(4):651-665.[ZK)]

［12］Ju Q, Li J, Liu Z S. Characterization of hot deformation behavior of extruded ZK60 magnesium alloy using 3D processing maps
［J］.Materials & Design,2014,56(5):889-897.[ZK)]

［13］梁海成. AZ80和ZK60镁合金热变形行为及热挤压成形工艺研究
［D］.沈阳：东北大学,2013.

Liang H C. Study on the Hot Deformation Behavior and Hot Extrusion Forming Technology of AZ80 and ZK60 alloy
［D］.Shenyang:Northeastern University,2013.[ZK)]

［14］闫丽媛,张宝红,张治民.热挤压工艺对ZK60合金组织性能的影响
［J］.热加工工艺,2009,38(3):28-31.

Yan L Y, Zhang B H, Zhi Z M. Influence of hot extrusion process on microstructure and property of magnesium alloy ZK60
［J］.Hot Working Technology, 2009,38(3):28-31.[ZK)]

［15］陈幼筠, 陈忠家, 王雪英，等. ZK60镁合金的热变形流变行为与本构方程
［J］.金属功能材料,2017,24(1):25-31.〖JP〗

Chen Y Y，Chen Z J，Wang X Y, et al. Flow behavior and constitutive equations of ZK60 magnesium alloy during isothermal compression
［J］. Metallic Functional Materials, 2017,24(1):25-31.

服务与反馈：

【文章下载】【加入收藏】