锻压技术

我国TC8钛合金研制进展与性能评价

英文标题：Research progress and performance evaluation of TC8 titanium alloy in China

单位：1.宝钛集团有限公司宝钛研究院 2.宝鸡钛业股份有限公司宝钛研究院 3.中国科学院金属研究所

分类号：TG146.2

出版年,卷(期):页码：2019,44(10):1-7

摘要：

从实验室研制到工业化批量生产及应用角度，阐述了TC8钛合金的研制进展，详述了材料研制突破的关键技术，介绍了该钛合金在不同温度下的拉伸、持久、蠕变、热稳定、疲劳等力学性能和线膨胀系数、比热等物理性能，并与俄罗斯BT8钛合金进行对比，综合评价材料性能；通过利用该合金棒材制作转子叶片锻件，验证其工艺性能。结果表明，TC8钛合金具有优异的力学性能，其力学性能符合技术条件要求，达到甚至超过BT8钛合金的性能水平，完全满足发动机用高温钛合金材料需求；该钛合金锻造性能良好，可采用常规的热处理方式，切削加工性好，表现出较好的工艺性能。

From laboratory development to industrial mass production and application, the research progress of TC8 titanium alloy was reviewed, and the key technologies during the material manufacture were expatiated. Then, its mechanical properties of tensile, long-lasting, creep, thermal stability, fatigue and its physical properties of linear expansion coefficient and specific heat at different temperatures were introduced, and the material properties were evaluated comprehensively by comparing with BT8 titanium alloy made in Russia. Furthermore, the forging parts of rotor blades were manufactured by the alloy bars, and its processing properties were verified. The results show that TC8 titanium alloy has excellent mechanical properties fitting with the requirements of technical conditions to reach or exceed that of BT8 titanium alloy and can entirely meet the high temperature titanium alloy need for engine. Thus,TC8 titanium alloy appears preferable processing properties with good forging performance and machining characteristics, which can be treated by conventional heat treatment.

基金项目：

国家重大项目资助（JPPT-2017-073）

作者简介：王俭（1969-），男，学士，高级工程师 E-mail：wangjian@baoti.com 通信作者：冯秋元（1974-），男，博士，高级工程师 E-mail：fengqiuyuan2003@163.com

参考文献：

［1］Valentin N M. Titanium Alloy: Russian Aircraft and Aerospace Applications
［M］. American: CRC Press, Taylor & Francis Group, 2006.

［2］董宝明，张胜，郭德伦，等.钛合金在俄罗斯飞机及航空航天上的应用
［M］.北京：航空工业出版社，2008.

Dong B M, Zhang S, Guo D L, et al. Titanium Alloys: Russian Aircraft and Aerospace Application
［M］. Beijing: Aviation Industry Press, 2008.

［3］何瑜，魏寿庸.Ti-6.5Al-3.5Mo-0.3Si及其改进型钛合金
［J］.钛工业进展，2004，21(2)：16-22.

He Y, Wei S Y. Ti-6.5Al-3.5Mo-0.3Si titanium alloy and its improved alloy
［J］. Titanium Industry Progress, 2004, 21(2): 16-22.

［4］魏寿庸，何瑜，王清江，等.俄航空发动机用高温钛合金发展综述
［J］.航空发动机，2005，31(1)：52-58.

Wei S Y, He Y, Wang Q J, et al. Development of the aero-engine heat-resisting titanium alloys in Russia
［J］. Aero-engine, 2005, 31(1): 52-58.

［5］毛小南，赵永庆，杨冠军.国外航空发动机用钛合金的发展现状
［J］.稀有金属快报，2007，26(5)：1-7.

Mao X N, Zhao Y Q, Yang G J. Development situation of the overseas titanium alloys used for aircraft engine
［J］. Rare Metals Letters, 2007, 26(5): 1-7.

［6］刘惠芳，李阁平，和平志，等.BT8钛合金β轧制棒材的组织和拉伸性能
［J］.稀有金属材料与工程，2005，34 (S3)：501-503.

Liu H F, Li G P, He P Z, et al. Microstructure and tensile properties of β rolled BT8 alloy bar
［J］. Rare Metal Materials and Engineering, 2005, 34(S3): 501-503.

［7］刘惠芳，李阁平，魏寿庸，等.BT8钛合金轧棒的组织与性能
［J］.钛工业进展，2006，23(6)：33-35.

Liu H F, Li G P, Wei S Y, et al. Microstructures and properties of BT8 alloy rolling bars
［J］. Titanium Industry Progress, 2006, 23(6): 33-35.

［8］和平志，刘惠芳，魏寿庸，等.加工工艺对TC8钛合金组织和拉伸性能的影响
［J］.钛工业进展，2009，26(5)：18-21.

He P Z, Liu H F, Wei S Y, et al. Effect of processing technique on structural properties of titanium alloy TC8
［J］. Titanium Industry Progress, 2009, 26(5): 18-21.

［9］陶海林，李阁平，张鹏，等.Ti-6.5Al-3.5Mo-0.2Si钛合金热稳定性研究
［J］.中国钛业，2012，(2)：23-26.

Tao H L, Li G P, Zhang P, et al. Research on thermal stability of Ti-6.5Al-3.5Mo-0.2Si
［J］. China Titanium Industry, 2012, (2): 23-26.

［10］冯秋元，方波，陈志勇，等.TC8-1钛合金大规格棒材的研制
［J］.钛工业进展，2015，32(1)：30-34.

Feng Q Y, Fang B, Chen Z Y, et al. Preparation of TC8-1 titanium alloy large-sized bars
［J］. Titanium Industry Progress, 2015, 32(1): 30-34.

［11］李亚非，王伟东，和永岗，等.新型钛合金TC8-1棒材显微组织及热处理工艺
［J］.金属热处理，2014，39(6): 84-87.

Li Y F, Wang W D, He Y G, et al. Microstructure and heat treatment process of a new titanium alloy TC8-1 bar
［J］. Heat Treatment of Metals, 2014, 39(6): 84-87.

［12］雒水会，冯秋元，薛虎明，等.热处理制度对TC8-1钛合金组织和性能的影响
［J］.材料热处理学报，2018，39(1)：27-31.

Luo S H, Feng Q Y, Xue H M, et al. Effect of heat treatment on microstructure and properties of TC8-1 titanium alloy
［J］. Transactions of Materials and Heat Treatment, 2018, 39(1): 27-31.

［13］冯秋元，雒水会，马宏刚，等.热处理工艺对TC8M-1钛合金组织和性能的影响
［J］.稀有金属材料与工程，2017，46(增刊1)：41-44.

Feng Q Y, Luo S H, Ma H G, et al. Effect of heat treatment process on microstructure and properties of TC8M-1 titanium alloy
［J］. Rare Metal Materials and Engineering, 2017, 46(S1): 41-44.

［14］徐锋，杨义，李长富，等.热处理制度对BT8钛合金室温拉伸强度影响的回归分析
［J］.金属学报，2005，41(10)：1057-1060.

Xu F, Yang Y, Li C F, et al. Regression analysis of effect of heat treatment on room temperature tensile strength of BT8 titanium alloy
［J］. Acta Metallugica Sinica, 2005, 41(10): 1057-1060.

［15］GB/T 3620.1—2007，钛及钛合金牌号和化学成分
［S］.

GB/T 3620.1—2007, Designation and composition of titanium and titanium alloys
［S］.

［16］GB/T 3620.2—2007，钛及钛合金加工产品化学成分允许偏差
［S］.

GB/T 3620.2—2007, Titanium and titanium alloys—Permissible variations of chemical composition for wrought product analysis
［S］.

［17］张小博，王田，孙虎代，等.热处理制度对TC8钛合金棒材组织和力学性能的影响
［J］.中国钛业，2017，(4)：44-46.

Zhang X B, Wang T, Sun H D, et al. Effect of heat treatment on microstructure and properties of TC8 titanium alloy bars
［J］. China Titanium Industry, 2017, (4): 44-46.

［18］Wang K, Li M Q. Characterization of discontinuous yielding phenomenon in isothermal compression of TC8 titanium alloy
［J］. Transactions of Nonferrous Metals Society of China, 2016, 26(6): 1583-1588.

［19］汪大成，闫进军，鞠秀义，等.TC8合金转子叶片锻造工艺研究
［J］.材料科学与工艺，2015，23(5)：20-24.

Wang D C, Yan J J, Ju X Y, et al. The study on forging process of blade of TC8 alloy
［J］. Materials Science and Technology, 2015, 23(5): 20-24.

［20］袁启明. 钛及钛合金的切削加工
［J］. 钛工业进展，1994，(4)：3-5.

Yuan Q M. Machining of titanium and titanium alloy
［J］. Titanium Industry Progress, 1994, (4): 3-5.

［21］陈五一，袁跃峰. 钛合金切削加工技术研究进展
［J］. 航空制造技术，2010，(15)：26-30.

Chen W Y, Yuan Y F. Research development of cutting technology for titanium alloy
［J］. Aeronautical Manufacturing Technology, 2010, (15): 26-30.

服务与反馈：

【文章下载】【加入收藏】