锻压技术

液压机批量成形控制策略

英文标题：Batch forming control strategy of hydraulic press

作者：杨俊苏恒陈中祥

单位：湖南师范大学

分类号：TH137

出版年,卷(期):页码：2020,45(1):151-155

摘要：

为了提高批量成形金属产品的塑性成形性能，建立了金属液压成形系统的数学模型，并针对追踪周期性位移信号存在滞后和周期性误差的问题，提出了一种基于重复控制和输出反馈的复合控制策略（ROF控制），以提高系统性能，并在金属成形模拟液压实验平台上验证了在ROF控制策略作用下的液压缸位移、速度和加速度响应特性，与PID控制进行了对比分析。实验结果表明，采用ROF控制策略，其系统追踪精度能达到0.05 mm，两个工作循环周期后，追踪过程基本无滞后，能保证金属按指定谐波信号成形，最终能有效地提高批量成形金属件的性能。

In order to improve the plastic forming performance of metal products by batch forming, a mathematical model of metal hydraulic forming system was established. Aiming at the problem of hysteresis and periodic error in tracking periodic displacement signals, a compound control strategy (ROF control) based on repeated control and output feedback was proposed to improve the system performance. Then, the hydraulic cylinder displacement, velocity and acceleration response characteristics under the ROF control strategy were verified by the experimental platform for simulating metal hydraulic forming, and it was compared and analysed with the PID control strategy. The experimental results show that the system tracking accuracy achieves 0.05 mm by the ROF control strategy, and after two working cycles, there is almost no hysteresis in the tracking process. Thus, it ensures that the metal is shaped by the specified harmonic signals to improve the performance of metal parts by batch forming effectively.

基金项目：

湖南省自然科学基金资助项目（2016JJ3088）

作者简介：杨俊（1985-），男，博士，讲师 E-mail： yangcsu@126.com 通讯作者：陈中祥（1984-），男，博士，讲师 E-mail：chenzx@hunnu.edu.cn

参考文献：

[1] Allwood J M, Duncan S R, Cao J, et al. Closed loop control of product properties in metal forming [J]. CIRP Annals, 2016, 65(2): 573-596.

[2]Mamutov A V, Golovashchenko S F, Mamutov V S, et al. Modeling of electrohydraulic forming of sheet metal parts [J]. Journal of Materials Processing Technology, 2015, 21(9):84-100.

[3]Maghareh A, Silva C E, Dyke S J. Servo hydraulic actuator in controllable canonical form: Identification and experimental validation [J]. Mechanical Systems and Signal Processing, 2018, 100(1):398-414.

[4]Schenke C, Weber J R. Energy efficiency of displacement control drive systems in hydraulic forming presses [J]. Journal of Manufacturing Science and Engineering, 2018, 141(2):144-152.

[5]杨俊,黄书舟,陈中祥.大型自由锻水压机操控系统双阀并联控制[J].锻压技术, 2018, 43(10): 141-145.

Yang J, Huang S Z, Chen Z X. Two valve parallel control of large free forging hydraulic press operation control system[J]. Forging & Stamping Technology.2018.43(10):141-145.

[6]Yung I, Zquez C, Freidovich L B. Robust position control design for a cylinder in mobile hydraulics applications [J]. Control Engineering Practice, 2017, 69(2):36-49.

[7]杨俊,曾乐,谭建平.液压比例系统特性分析与非对称控制策略[J].华中科技大学学报：自然科学版, 2016, 44(5): 121-127.

Yang J, Zeng L, Tan J P. Characteiistic analysis of hydraulic proportional system and asymetric control strategy[J]. Journal of Huazhong University of Science and Technology: Natural Science Edition, 2016, 44(5): 121-127.

[8]田慧慧, 苏玉鑫. 机器人系统输出反馈重复学习轨迹跟踪控制[J].控制与决策, 2012, 27(11): 1756-1760.

Tian H H, Su Y X.Global asymptotic stable repetitive output feedback tracking control of robot manipulators[J].Control and Decision, 2012, 27(11): 1756-1760.

[9]严求真,柳向斌,朱胜,等.非参数不确定系统的双周期重复控制[J].控制理论与应用, 2018, 35(9): 1311-1318.

Yan Q Z, Liu X B, Zhu S, et al. Dual period repetitive control for nonparametric uncertain systems[J].Control Theory & Applications,2018, 35(9): 1311-1318.

[10] Schulting P, Vanderbroeck C H, De R W. Analysis and design of repetitive controllers for applications in distorted distribution grids [J]. IEEE Transactions on Power Electronics, 2019, 34(1): 996-1004.

[11] Shao Z, Xiang Z. High order repetitive control for discrete time linear switched systems [J]. International Journal of Systems Science, 2017, 48(9): 1882-1890.

[12]Yang Y, Ma L, Huang D. Development and repetitive learning control of lower limb exoskeleton driven by electrohydraulic actuators[J]. IEEE Transactions on Industrial Electronics, 2017, 64(5): 4169-4178.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】