|
摘要：
|
|
具有一定曲率外形的铝合金整体壁板属于典型的多筋零部件，传统弯曲成形工艺成形困难，容易产生多种缺陷。提出了离散填料辅助滚弯成形整体2A12T4铝合金壁板滚弯工艺，并通过实验与整体填料滚变成形进行了对比，同时采用有限元模拟技术，探究了离散填料辅助整体壁板滚弯成形中的影响因素。研究结果表明：填料数量、上下垫板厚度等因素对成形性能影响较大，填料在3~6块时成形稳定，可以有效地避免筋条屈曲与失稳；随垫板厚度增加，壁板表面圆弧更加光滑、连续，但是回弹性增强；上下垫板分别在10~20 mm厚度时，综合性能较好。通过离散填料辅助滚弯技术可以成形出质量较高的整体壁板。
|
|
The integral panel skins of aluminum alloy with a certain curvature is a typical component with multi-ribs which is difficult to form and easy to produce various defects by traditional bending process. Therefore, the discrete filling assisted rolling for integral panel skins of 2A12T4 aluminum alloy was proposed and compared with the overall filling rolling through experiments. At the same time, the influent factors in the discrete filling assisted rolling of integral panel skins were explored by the finite element simulation technology. The results show that the number of filler and the thickness of upper and lower backing plates have a great influence on the forming quality, and when the number of filler is 3-6, the forming is stable to avoid rib buckling and instability. Furthermore, with the increasing of the thickness for backing plate, the circular arc on the surface of panel skins is smoother and more continuous, but the springback is enhanced. When the thickness of upper and lower backing plates is 10-20 mm respectively, the comprehensive performance of the integral panel skins is better. Thus, the discrete filling assisted rolling technology can form the high-quality integral panel skins.
|
|
基金项目：
|
|
国家自然科学基金资助项目（51875547）
|
|
作者简介：
|
|
李烨琪（1994-），女，硕士研究生，E-mail：936022904@qq.com；通讯作者：刘劲松（1971-），男，博士，副教授，E-mail：jsliu@imr.ac.cn
|
|
参考文献：
|
[1]刘劲松，张士宏，王忠堂，等.整体壁板增量压弯试验与模拟[J].精密成形工程，2003，21(6): 23-25.
Liu J S, Zhang S H, Wang Z T, et al. Experiment and simulation on the incremental bend forming technology of the integral wing-skin panel[J]. Metal Forming Technology, 2003, 21 (6): 23-25.
[2]刘劲松，许沂，张士宏，等.整体壁板增量压弯过程应力应变模拟[J].塑性工程学报，2003，10(5):42-45.
Liu J S, Xu Y, Zhang S H, et al. Finite element simulation of stress and strain on the incremental bend forming technology of the integral wing-skin panel[J]. Journal of Plasticity Engineering, 2003, 10(5): 42-45.
[3]任丽梅，王忠堂，刘劲松，等.异型截面筋条压弯稳定性分析及数值模拟研究[J].塑性工程学报，2003，10(5):39-41.
Ren L M, Wang Z T, Liu J S, et al. Analysis and numerical simulation on stability in irregular section of ribs bending process[J].Journal of Plasticity Engineering, 2003, 10 (5): 39-41.
[4]Zeng J, Liu Z, Champliaud H. FEM dynamic simulation and analysis of the roll-bending process for forming a conical tube [J]. Journal of Materials Processing Technology, 2008, 198(1-3):330-343.
[5]李升，黄重国，靳舜尧，等.冷轧5A70铝合金超塑性板材热处理工艺[J].稀有金属，2018，42（4）: 344-349.
Li S, Huang Z G, Jin S Y, et al. Heat treatment process of cold rolled 5A70 aluminum alloy superplastic sheet[J]. Chinese Journal of Rare Metals, 2018, 42 (4):344-349
[6]赵长喜, 李继霞.航天器整体壁板结构制造技术[J].航天制造技术，2006，(4):44-48.
Zhao C X, Li J X. The manufacturing technology of integral panel on spacecraft [J]. Aerospace Manufacturing Technology, 2006, (4): 44-48.
[7]Gandhi A H, Raval H K. Analytical and empirical modeling of top roller position for three-roller cylindrical bending of plates and its experimental verification [J]. Journal of Materials Processing Technology, 2008, 197(1-3): 268-278.
[8]Hu W, Wang Z R. Theoretical analysis and experimental study to support the development of a more valuable roll-bending process [J]. International Journal of Machine Tools and Manufacture, 2001, 41 (5):731-747.
[9]尹苹,晋坤,祝世强,等. 数铣网格壁板滚弯成形工艺研究[J].锻压技术,2018, 43 (2):19-23.
Yin P, Jin K, Zhu S Q, et al. Research on roll bending process of grid panel by CNC milling [J]. Forging & Stamping Technology, 2018, 43 (2):19-23.
[10]肖寒，刘劲松，张士宏，等.塑料辅助网格式整体壁板滚弯成形实验研究[J]. 塑性工程学报，2009，16(4)：17-20.
Xiao H, Liu J S, Zhang S H, et al. Experimental research on the plastics filling roll bending process of integral panel skins with grid-type ribs [J]. Journal of Plasticity Engineering, 2009, 16(4):17-20.
[11]肖寒，刘劲松，张士宏，等.筋条外置整体壁板填料滚弯成形工艺研究[J].材料工程，2010, (8):56-60.
Xiao H, Liu J S, Zhang S H, et al. Research on filling roll bending process of integral panel skins with rib-outward [J]. Journal of Materials Engineering, 2010, (8):56-60.
[12]肖寒.轻量化结构件弯曲成形工艺研究[D]. 大连：大连理工大学，2010.
Xiao H. Research on Bending Processes of Lightweight Structures[D]. Dalian: Dalian University of Technology, 2010.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
