锻压技术

内燃机用激光增材制造Ti600合金原位拉伸组织演变分析

英文标题：Evolution analysis on in-situ tensile microstructure of Ti600 alloy manufactured by laser additive for internal combustion engine

作者：郑华辉吕俊余振宇

单位：延安职业技术学院北京聚星复合材料技术发展有限公司中国石油大学（北京）

关键词：激光增材制造 Ti600合金原位拉伸 β晶界裂纹演变机制

分类号：TG146

出版年,卷(期):页码：2020,45(5):180-184

摘要：

为了提高内燃机用激光增材制造Ti600合金的综合性能，对其进行原位拉伸力学测试，对微裂纹生成、扩展与断裂进行更加精确地观察，并分析不同原位拉伸位移下的微观组织及裂纹演变机制。研究结果表明：激光增材制造Ti600合金形成了具有粗大尺寸的柱状β晶，其生长方向与构造堆积方向一致；β晶界呈现出垂直生长的状态，在靠近β晶的区域形成了大量的板条型α晶以及生长方向一致的α簇组织；当原位拉伸位移增加后，裂纹沿着β晶界向上延伸，形成了偏向β晶界的裂纹；当位移量提高后，合金中形成了随机排列的晶粒，同时滑移方向也存在明显差异，导致交叉滑移带的形成。该研究对优化工艺方法及提升激光增材制造Ti600合金性能具有一定的参考价值。

In order to improve the comprehensive performance of Ti600 alloy manufactured by laser additive for internal combustion engine, the in-situ tensile mechanics test was conducted, and the generation, propagation and fracture of microcracks were observed more accurately to analyze the microstructure and the crack evolution mechanism under different in-situ tensile displacements. The results show that the columnar β crystals with coarse size are formed in Ti600 alloy manufactured by laser additive, and the growth direction is consistent with the structure accumulation direction. Furthermore, the β grain boundaries present a state of vertical growth, and a large number of lath-type α crystals and α-cluster structures with the same growth direction are formed in the region near β crystals. When the in-situ tensile displacement increases, the crack extends upward along β grain boundaries to form the crack inclining to β grain boundaries. The randomly arranged grains are formed in the alloy, and the slip direction is obviously different to lead to the formation of cross slip zone when the displacement increases. Thus, the above research provides a certain reference value for optimizing the process method and improving the properties of Ti600 alloy manufactured by laser additive.

基金项目：

北京市自然科学基金资助项目(3162027)

郑华辉（1966-），男，工学硕士，副教授，E-mail：jishunpang694807@126.com

参考文献：

[1]赵宇辉, 姚超, 王志国. 激光增材制造过程熔池温度测试及预测方法的研究[J].真空, 2020, 57(1): 76-82.
Zhao Y H, Yao C,Wang Z G. Research on test and prediction method of molten pool by laser additive maufacturing[J]. Vacuum,2020,57(1):76-82.
[2]李明祥, 张涛, 于飞, 等. 金属电弧熔丝增材制造及其复合制造技术研究进展[J]. 航空制造技术, 2019, 62(17): 14-21.
Li M X,Zhang T,Yu F, et al. Research progress of wire and arc additive manufacturing and hybrid manufacturing technology for metal components[J]. Aeronautical Manufacturing Technology,2019,62(17):14-21.
[3]Carroll B E, Palmer T A, Beese A M. Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing[J]. Acta Materialia, 2015, 87: 309-320.
[4]王琦. TC4 钛合金的低温拉伸性能[J]. 材料工程,2009,37(3): 54-55, 61.
Wang Q. Tensile mechanical properties of TC4 alloy at 243 K [J]. Journal of Materials Engineering, 2009, 37(3): 54-55, 61.
[5] kerfeldt P. Additive Manufacturing of Ti600: Relationship between Microstructure, Defects and Mechanical Properties[D]. Sweden: Lule Tekniska Universitet, 2016.
[6] kerfeldt P, Antti M L, Pederson R. Influence of microstructure on mechanical properties of laser metal wiredeposited Ti-6Al-4V [J]. Materials Science and Engineering: A, 2016, 674: 428-437.
[7]高晓龙, 李海军, 刘晶, 等. 低温对TC4 脉冲激光焊接接头组织和性能的影响[J]. 材料科学与工程学报,2017, 35(5): 836-840.
Gao X L, Li H J, Liu J, et al. Effect of low temperature on the microstructure and mechanical properties of pulsed Nd:YAG laser welding for TC4 titanium sheet [J]. Journal of Materials Science and Engineering, 2017, 35(5): 836-840.
[8]陈静, 张霜银, 薛蕾, 等. 激光快速成形Ti-6Al-4V合金力学性能[J]. 稀有金属材料与工程, 2007, 36(3): 475-479.
Chen J, Zhang S Y, Xue L, et al. Mechanical properties of Ti-6Al-4V alloy by laser rapid forming [J]. Rare Metal Materials and Engineering, 2007, 36(3): 475-479.
[9]Kim Y, Song Y B, Lee S H. Microstructure and intermediatetemperature mechanical properties of powder metallurgy Ti-6Al-4V alloy prepared by the prealloyed approach[J]. Journal of Alloys and Compounds, 2015, 637: 234-241.
[10]Li P H, Guo W G, Yuan K B, et al. Effects of processing defects on the dynamic tensile mechanical behavior of lasersolidformed Ti-6Al-4V [J]. Materials Characterization, 2018, 140: 15-29.
[11]Lu J X, Chang L, Wang J, et al. Insitu investigation of the anisotropic mechanical properties of laser direct metal deposition Ti6Al4V alloy[J]. Materials Science and Engineering: A, 2018, 712: 199-205.
[12]Ren Y M, Lin X, Fu X, et al. Microstructure and deformation behavior of Ti-6Al-4V alloy by highpower laser solid forming[J]. Acta Materialia, 2017, 132:82-95.
[13]AlBermani S S, Blackmore M L, Zhang W, et al. The origin of microstructural diversity, texture, and mechanical properties in electron beam melted Ti-6Al-4V[J]. Metallurgical and Materials Transactions A, 2010, 41: 3422-3434.

服务与反馈：

【文章下载】【加入收藏】