锻压技术

基于傅里叶描述子的预成形设计

英文标题：Preforming design based on Fourier descriptor

作者：黄超群来飞

分类号：TG312

出版年,卷(期):页码：2020,45(6):16-21

摘要：

为了解决轴对称锻件的预成形设计问题，提出了一种基于傅里叶变换理论的预成形设计方法。在此设计方法中，预制坯的形状可以使用初始坯料形状和终锻件的形状在傅里叶空间进行加和，并且可以通过控制加和的权重系数来控制预制坯形状对终锻件的逼近程度。将初始坯料形状和终锻件形状进行傅里叶变换，可将欧氏空间中的平面轮廓形状转化为傅里叶空间中的傅里叶描述子，将初始坯料形状和终锻件形状的傅里叶描述子加权相加后进行傅里叶逆变换，以生成的新形状作为预制坯的形状。最后，用一个轴对称锻件对算法进行测试，测试结果表明：锻件填充完整、等效应变均匀，没有折叠等缺陷。

In order to solve the preforming design problem of axisymmetric forgings, the preforming design method based on Fourier transform theory was proposed. In this design method, the shapes of preform billet was added in Fourier space by the shapes of initial billet and final forging, and the similar degree of preform billet shape to final forgings was controlled by controlling the weight coefficient of addition. Then, the Fourier transformation of the initial billet shape and the final forging shape was conducted by converting the plane contour shape in Euclidean space into the Fourier descriptors in Fourier space, and after the weighted addition of the Fourier descriptors for the initial billet shape and the final forging shape, the inverse Fourier transform was performed to generate the new shape, which was used as the preform billet shape. Finally, an axisymmetric forging was used to test the algorithm. The test results show that the forging fills perfectly, the equivalent strain is uniform, and there are no folding and other defects.

基金项目：

重庆工商职业学院科研项目资助（ZD2016-01）

黄超群(1981-),女,硕士,副教授 E-mail：hcq_ctbi@163.com

参考文献：

［1］Gao T, Yang H, Liu Y. Influence of dynamic boundary conditions on preform design for deformation uniformity in backward simulation
［J］. Journal of Materials Processing Technology, 2008, 197(1): 255-260.

［2］Thiyagarajan N, Grandhi R V. 3D preform shape optimization in forging using reduced basis techniques
［J］. Engineering Optimization, 2005, 37(8): 797-811.

［3］Kong T F, Chan L C, Lee T C. Numerical and experimental investigation of preform design in non-axisymmetric warm forming
［J］. The International Journal of Advanced Manufacturing Technology, 2008, 37(9-10): 908-919.

［4］Park J J, Rebelo N, Kobayashi S . A new approach to preform design in metal forming with the finite element method
［J］. International Journal of Machine Tool Design & Research, 1983, 23(1):71-79.

［5］Lee S R, Lee Y K, Park C H, et al. A new method of preform design in hot forging by using electric field theory
［J］. International Journal of Mechanical Sciences, 2002, 44(4): 773-792.

［6］Hong J T, Lee S R, Park C H, et al. Iterative preform design technique by tracing the material flow along the deformation path
［J］. Engineering Computations, 2006, 23(1): 16-31.

［7］Shao Y, Lu B, Xu D K, et al. Topology-based preform design optimization for blade forging
［J］. International Journal of Advanced Manufacturing Technology, 2016, 86(5-8):1593-1605.

［8］Lu B, Ou H, Cui Z S. Shape optimisation of preform design for precision close-die forging
［J］. Structural & Multidisciplinary Optimization, 2011, 44(6): 785-796.

［9］朱红亮, 王广欣, 陈学文, 等. 导电杆冷锻成形数值模拟与工艺优化
［J］. 锻压技术, 2019，44(4):16-22.

Zhu H L, Wang G X, Chen X W, et al. Numerical simulation and process optimization on cold forging of conductive rod
［J］. Forging & Stamping Technology, 2019，44(4):16-22.

［10］刘晓静, 王超. 高翼型驱动齿轮的闭式锻造工艺设计优化
［J］. 热加工工艺, 2015，44(17):126-127，133.

Liu X J, Wang C. Design optimization of closed die forging process for high wing type drive gear
［J］. Hot Working Technology, 2015，44 (17):126-127，133.

［11］程俊伟, 刘长红, 冯宪章, 等. 异形法兰盘预锻成形研究
［J］. 热加工工艺, 2016，45(1):159-162.

Cheng J W, Liu C H, Feng X Z, et al. Research on preforging die forming of abnormity shaft flange
［J］. Hot Working Technology, 2016，45(1):159-162.

［12］徐方, 董湘怀, 王新宝, 等. 矩形截面件径向锻造工艺优化
［J］. 锻压技术, 2019，44(4):1-9.

Xu F, Dong X H, Wang X B, et al. Optimization on radial forging process of rectangular cross-section billet
［J］. Forging & Stamping Technology, 2019，44(4):1-9.

［13］李旭斌, 吴昂,张治民,等.高强铝合金异形复杂构件预成形优化设计
［J］.锻压技术,2019,44(9):56-62.

Li X B,Wu A,Zhang Z M,et al. Preforming optimization design on high-strength aluminum alloy special-shaped complex components
［J］. Forging & Stamping Technology,2019,44(9):56-62.

［14］姚波, 方刚. 汽车发动机连杆预锻过程模拟及预锻毛坯优化
［J］. 热加工工艺, 2009, 38(13):106-109，114.

Yao B, Fang G. Numerical simulation of pre-forging for connecting rod of automobile engine and optimization of its pre-forging billet
［J］. Hot Working Technology, 2009, 38(13):106-109，114.

［15］Zheng Y, Guo B, Chen Z, et al. A fourier descriptor of 2D shapes based on multiscale centroid contour distances used in object recognition in remote sensing images
［J］. Sensors, 2019, 19(3): 486.

［16］Cai J, Li F, Liu T. A new approach of preform design based on 3D electrostatic field simulation and geometric transformation
［J］. The International Journal of Advanced Manufacturing Technology, 2011, 56(5): 579-588.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】