锻压技术

基于多特征模型加工的数控渐进成形轨迹

英文标题：CNC incremental forming trajectory based on multi-feature model processing

作者：冯辉后柏宇赵佩李彩云杨宇诗张翀邓永

分类号：TG335.5

出版年,卷(期):页码：2020,45(6):116-121

摘要：

针对多特征模型的不同数控渐进成形加工方式的问题，分析了基于层优先轨迹的加工方式与基于特征优先轨迹的加工方式，并对比了两种加工方式的优劣之处。采用有限元分析软件ANSYS对两种加工方式下板材的成形过程进行模拟，有限元分析结果表明：基于特征优先轨迹下的数控渐进成形方式的效率比基于层优先轨迹下的数控渐进成形方式高20.7%，另外，基于层优先轨迹加工方式下板材成形后的最小厚度值也比基于特征优先轨迹加工方式下板材成形后的最小厚度值要略大。但基于层优先轨迹下成形后板材的轮廓相对于基于特征优先轨迹下成形后板材的轮廓，其更加接近于设计件的轮廓。

For the problems of different CNC incremental forming methods with multi-feature models, the processing methods based on layer-first trajectories and feature-first trajectories were analyzed, and the advantages and disadvantages of the two processing methods were compared. Then, the forming process of plate under the two processing methods was simulated by finite element analysis software ANSYS, respectively. The results of finite element analysis show that the efficiency of CNC incremental forming method based on feature-first trajectory is 20.7% higher than that of CNC incremental forming method based on layer-first trajectory. In addition, the minimum thickness value after forming of sheet material based on the layer-first trajectory processing method is slightly larger than the minimum thickness value after forming sheet material based on the feature-first trajectory processing method. However, the contour of the formed sheet material under the layer-first trajectory is closer to the contour of designed part than the contour of the formed sheet material under the feature-first trajectory.

基金项目：

冯辉 (1992-)，男，硕士，助理工程师 E-mail：1107896330@qq.com

参考文献：

［1］朱虎, 冯辉. 基于反投影带垫板的网孔板数控渐进成形
［J］. 锻压技术, 2019, 44(2):67-73.

Zhu H, Feng H. CNC incremental forming of mesh plate with pad plate based on back-projection
［J］. Forging & Stamping Technology, 2019, 44(2):67-73.

［2］肖冬选, 朱虎, 姜在宽. 双面数控渐进成形仿真系统
［J］. 锻压技术, 2018, 43(1):46-52.

Xiao D X, Zhu H, Kang Jaegwa. Simulation system for double sided CNC incremental forming
［J］. Forging & Stamping Technology, 2018, 43(1):46-52.

［3］Micari F, Ambrogio G, Filice L. Shape and dimensional accuracy in single point incremental forming state of the art and future trends
［J］. Journal of Materials Processing Technology, 2007, 191(1-3):390-395.

［4］朱虎, 李吉龙. 数控渐进成形中实验件几何参数对成形结果的影响
［J］. 锻压技术, 2019, 44(1):27-33.

Zhu H, Li J L. The influence of the geometrical parameters of the test piece on the forming result in the CNC incremental forming
［J］. Forging & Stamping Technology, 2019, 44(1):27-33.

［5］Liu Z B, William J T D, Li Y L, et al. Multi-pass deformation design for incremental sheet forming: Analytical modeling, finite element analysis and experimental validation
［J］. Journal of Materials Processing Technology, 2014, 214(3):620-634.

［6］莫建华, 韩飞. 金属板材数字化渐进成形技术研究现状
［J］. 中国机械工程, 2008, 19(4):491-497.

Mo J H, Han F. Research status of metal in digital incremental forming technology
［J］. China Mechanical Engineering, 2008, 19(4):491-497.

［7］Isaac J, Cecilio L, Oscar M R, et al. Investigation of residual stress distribution in single point incremental forming of aluminum parts by X-ray diffraction technique
［J］. International Journal of Advance Mannufacturing Technology, 2017, 91:2571-2580.

［8］王华毕, 魏目青, 徐旺丁. 变角度缓面零件渐进成形刀具轨迹优化
［J］. 塑性工程学报, 2017, 24(2):59-63.

Wang H B, Wei M Q, Xu W D. Tool path optimization for variable angle surface parts in single point incremental forming
［J］. Journal of Plasticity Engineering, 2017, 24(2):59-63.

［9］李华溢, 朱虎, 刘一波，等. 数控渐进成形下压点分散的等高线成形轨迹生成
［J］. 机床与液压, 2015, 43(17):32-34.

Li H Y, Zhu H, Liu Y B, et al. Generation of underdraught points dispersed contour forming path for NC incremental forming
［J］. Machine Tool & Hydraulics, 2015, 43(17):32-34.

［10］朱虎, 张新迪, 马少华. 控渐进反向成形中支撑模对成形精度的影响
［J］. 锻压技术, 2016, 41(7):1-6.

Zhu H, Zhang X D, Ma S H. Influence of supporting die on forming accuracy in CNC incremental reverse forming
［J］. Forging & Stamping Technology, 2016, 41(7):1-6.

［11］朱虎, 张新迪, 白金兰, 等. 双凸板材件的数控渐进成形研究
［J］. 锻压技术, 2016, 41(5): 14-19.

Zhu H, Zhang X D, Bai J L, et al. Study on CNC incremental forming of double convex plate parts
［J］. Forging & Stamping Technology, 2016, 41(5):14-19.

［12］Lingam R, Prakash O, Belk J H, et al. Automatic feature recognition and tool path strategies for enhancing accuracy in double sided incremental forming
［J］. International Journal of Advanced Manufacturing Technology, 2017, 88(5-8):1-17.

［13］Afonso D, Sousa R A D, Torcato R. Incremental Forming of Tunnel Type Parts
［J］. Procedia Engineering, 2017, 183:137-142.

服务与反馈：

【文章下载】【加入收藏】