锻压技术

电池模组液冷板冲压结构设计及其散热性能研究

英文标题：Research on stamping structure design and heat dissipation performance of liquid-cooling plate for battery module

分类号：TH132.47

出版年,卷(期):页码：2021,46(10):112-118

摘要：

为了探究液冷板冲压结构对电池模组散热性能的影响，对液冷板的冲压结构参数进行了分析与设计，采用CFD（计算流体动力学）流固热耦合数值计算方法，对不同液冷板流道结构参数下的散热性能、能耗以及均温性能进行了分析。结果表明：减小中心流道宽度，液冷系统的散热均温性能提升明显；中心流道宽度W5等于7 mm时，平均温度降低了2.5%，而最大温差降低了7.7%。流道深度越小，系统的散热均温性能越好，能耗亦大幅增加；流道深度为2 mm时，平均温度下降了26.9%，最大温差下降了32.7%，流阻升高了3.4倍。添加强化传热结构后，液冷系统的平均温度降低了3.8%、最大温差下降了15.1%；相比整体区域添加强化传热结构，部分区域添加强化传热结构可以减小流阻、降低能耗，而不引起系统的散热均温性能的显著变化。

In order to investigate the effects of stamping structure for liquid-cooling plate on the heat dissipation performance of battery module, the stamping structure parameters of liquid-cooling plate were analyzed and designed, and CFD (Computational Fluid Dynamics) fluid-solid thermal coupled numerical calculation method was used to analyze the heat dissipation performance, energy consumption, and uniform temperature performance under various flow channel structure parameters of liquid-cooling plate. The results show that when the width of central flow channel decreases, the heat dissipation and temperature uniformity performances of the liquid-cooling system are significantly improved. When the width of central flow channel W5 is equal to 7 mm, the average temperature drops by 2.5% and the maximum temperature difference decreases by 7.7%. The smaller the depth of flow channel is, the better the heat dissipation and temperature uniformity performances of liquid-cooling system are, and the energy consumption increases significantly. When the depth of flow channel is 2 mm, the average temperature decreases by 26.9%, the maximum temperature difference decreases by 32.7%, and the flow resistance increases by 3.4 times. The average temperature drops by 3.8% in liquid-cooling system adding the enhanced heat transfer structure, and the maximum temperature difference decreases by 15.1%. Compared with adding an enhanced heat transfer structure in the whole area, adding enhanced heat transfer structure in some area can reduce the flow resistance and energy consumption without causing significant changes in the heat dissipation and temperature uniformity performances of the system.

基金项目：

湖南省基金项目（2020JJ7004）

作者简介：杨志红（1969-），女，本科，高级工程师 E-mail：1140745305@qq.com 通信作者：廖向阳（1970-），男，硕士，副教授 E-mail：390391218@qq.com

参考文献：

[1]李军求, 吴朴恩, 张承宁.电动汽车动力电池热管理技术的研究与实现[J].汽车工程, 2016, 38(1):22-27，35.

Li J Q, Wu P E, Zhang C N. Research and implementation of electric vehicle power battery thermal management technology [J]. Automotive Engineering, 2016, 38(1): 22-27，35.

[2]朱晓庆, 王震坡, Wang Hsin，等. 锂离子动力电池热失控与安全管理研究综述[J].机械工程学报, 2020, 56(14):91-118.

Zhu X Q, Wang Z P, Wang Hsin，et al. Summary of thermal runaway and safety management of lithium-ion power cells[J]. Journal of Mechanical Engineering, 2020, 56 (14): 91-118.

[3]陈凯, 汪双凤.基于遗传算法的风冷式动力电池热管理系统优化[J]. 工程热物理学报, 2018,39(2):384-388.

Chen K, Wang S F. Optimization of air cooled power battery thermal management system based on genetic algorithm [J]. Journal of Engineering Thermophysics, 2018, 39(2): 384-388.

[4]冯能莲, 陈龙科, 邹广才. 新型液冷动力电池模组传热特性试验研究[J]. 汽车工程,2018,40(4):405-410.

Feng N L, Chen L K, Zou G C. Experimental research on heat transfer characteristics of a novel liquid cooling power battery module [J]. Automotive Engineering, 2018, 40(4):405-410.

[5]赵佳腾, 饶中浩, 李意民. 基于相变材料的动力电池热管理数值模拟[J].工程热物理学报, 2016, 37(6):1275-1280.

Zhao J T, Rao Z H, Li Y M. Numerical simulation of power battery thermal management based on phase change materials [J]. Journal of Engineering Thermophysics, 2016, 37(6):1275-1280.

[6]Javani N, Dincer I, Naterer G F, et al. Modeling of passive thermal management for electric vehicle battery packs with PCM between cells[J]. Appl. Therm. Eng. , 2014, 73: 307-316.

[7]Rao Z H, Qian Z, Kuang Y, et al. Thermal performance of liquid cooling based thermal management system for cylindrical lithium-ion battery module with variable contact surface[J] Appl. Therm. Eng. , 2017, 123: 1514-1522.

[8]Anthony Jarrett, Il Yong Kim. Design optimization of electric vehicle battery cooling plates for thermal performance[J]. Journal of Power Sources, 2011, 196(23): 10359-10368.

[9]Anthony Jarrett, Il Yong Kim. Influence of operating conditions on the optimum design of electric vehicle battery cooling plates[J]. Journal of Power Sources, 2014, 245:644-655.

[10]Shang Z Z, Qi H Z, Liu X T，et al. Structural optimization of lithium-ion battery for improving thermal performance based on a liquid cooling system[J]. International Journal of Heat and Mass Transfer, 2019, 130：33-41.

[11]E J Q, Han D D, Qiu A，et al. Orthogonal experimental design of liquid-cooling structure on the cooling effect of a liquid-cooled battery thermal management system[J]. Applied Thermal Engineering, 2018,132：508-520.

[12]闵小滕, 唐志国, 高钦，等. 基于微小通道波形扁管的圆柱电池液冷模组散热特性[J]. 浙江大学学报：工学版, 2019, 53(3):463-469.

Min X T, Tang Z G, Gao Q，et al. Heat dissipation characteristics of cylindrical battery liquid cooling module based on micro channel corrugated flat tube [J]. Journal of Zhejiang University: Engineering Edition, 2019, 53(3): 463-469.

服务与反馈：

【文章下载】【加入收藏】