锻压技术

局部热处理对7B04铝合金口框零件成形性影响的模拟研究

英文标题：Simulation and study on influence of local heat treatment on formability for 7B04 aluminum alloy frame parts

分类号：TG386

出版年,卷(期):页码：2021,46(10):187-195

摘要：

通过单向拉伸试验获得7B04铝合金原始O态和热处理T4态板材的力学性能参数。运用Dynaform有限元模拟软件，对原始O态板材及局部热处理差性板材（THTB）进行复杂口框零件的冲压成形及充液拉伸成形模拟，系统地研究了在两种成形工艺下局部热处理对口框零件成形性的影响。模拟结果表明：冲压成形口框零件时，原始O态板材局部减薄严重，破裂多发生在中间加强筋底部及圆角处等平面应变区域，局部热处理导致硬化区域周围的板材发生严重破裂，无法改善零件的整体成形性；充液拉深成形口框零件时，原始O态板材在拉深成形过程中，传力区圆角处发生破裂，合理的局部热处理方案引起材料局部硬化，使原始破裂位置的应变路径由平面应变转变成单拉应变，显著提高了口框零件的成形能力。

The mechanical property parameters of original O-state and heat-treated T4-state sheets for 7B04 aluminum alloy were obtained by uniaxial tensile tests, and the stamping process and hydroforming process of complex frame parts of original O-state sheet and tailored heat treated blank (THTB) were simulated by finite element simulation software Dynaform to systematically research the influence of local heat treatment on the formability of frame parts under different forming processes. The simulation results show that the local thinning of original O-state sheet is serious when the frame parts are formed by stamping, the fracture mostly occurs in the plane strain area such as the bottom of middle stiffener and the fillet, and the local heat treatment leads to the serious fracture of sheet around the hardening area, which is unable to improve the overall formability of frame parts. When the frame parts are formed by hydroforming, the original O-state sheet cracks at the fillet of force transmission zone during the deep drawing process, and the reasonable local heat treatment scheme causes local hardening of material, which changes the strain path at the original fracture position from plane strain to single tensile strain. Therefore, the forming ability of frame parts is improved significantly.

基金项目：

沈阳市重点科技研发计划对外科技交流合作专项（17-105-6-00）；国家自然科学基金青年基金（51205261）

作者简介：王志坚（1974-），女，博士，教授 E-mail：wangzhijian1974@sina.com 通信作者：宋鸿武（1981-），男，博士，研究员 E-mail：hwsong@imr.ac.cn

参考文献：

[1]李红英, 刘姣姣,余玮琛,等.固溶处理对7B04铝合金组织及性能的影响[J].中国有色金属学报,2016,26(2):252-260.

Li H Y, Liu J J, Yu W C, et al. Effect of solution treatment on microstructure and properties of 7B04 aluminum alloy [J]. Acta nonferrous metals Sinica, 2016, 26(2): 252-260.

[2]肖尧, 鲁帅.航空铝合金及其材料加工分析[J].中国新技术新产品,2016,(11):64-65.

Xiao Y, Lu S. Processing analysis of aviation aluminum alloy and its materials [J]. China New Technology and New Products, 2016, (11): 64-65.

[3]陈小明, 宋仁国,李杰.7×××系铝合金的研究现状及发展趋势[J].材料导报,2009,23(3):67-70.

Chen X M, Song R G, Li J. Research status and development trend of 7××× series aluminum alloys [J]. Materials Guide, 2009, 23(3): 67-70.

[4]邓学峰, 张辉,陈振华.铝合金成形性及成形工艺研究现状[J].材料导报,2005,12(19):56-59.

Deng X F, Zhang H, Chen Z H. Research status of aluminum alloy formability and forming process [J]. Materials Guide, 2005,12(19): 56-59.

[5]靳舜尧, 唐振宇,黄重国.5A02铝合金薄壁异形管内高压成形数值模拟及试验[J].稀有金属,2020,44(11):1121-1128

Jin S Y, Tang Z Y, Huang Z G. Numerical simulation and experiment of internal high pressure forming (IHPF) of 5A02 aluminum alloy thin-walled shaped tubes [J]. Chinese Journal of Rare Metals, 2020, 44(11): 1121-1128.

[6]Staud D, Merklein M. Inverse approach to the forming simulation of tailored heat treated[J]. Int. J. Mater.Form., 2008, 1:37-40.

[7]Merklein M, Johannes M, Lechner M, et al. A review on tailored blanks-production, applications and evaluation[J]. Journal of Materials Processing Technology, 2014, 214(2):151-164.

[8]Hofmann A. Deep drawing of process optimized blanks[J]. Journal of Materials Processing Technology, 2001, 119(1-3):127-132.

[9]Geiger M, Merklein M, Staud D, et al. An inverse approach to the numerical design of the process sequence of tailored heat treated blanks[J]. Production Engineering, 2008, 2(1):15-20.

[10]Hung N, Marion M. Improved formability of aluminum alloys using laser induced hardening of tailored heat treated blanks[J]. Physics Procedia, 2012, 39:318-326.

[11]Geiger M, Merklein M, Kerausch M. Finite element simulation of deep drawing of tailored heat treated blanks[J]. CIRP Annals, 2004,2:223-226.

[12]王志坚, 王佳乐,宋鸿武,等.局部热处理提高铝合金复杂零件成形性的模拟研究[J].塑性工程学报,2019,26(3):25-32.

Wang Z J, Wang J L, Song H W, et al. Simulation study on formability improvement of complex aluminum alloy parts through tailored heat treatment[J]. Journal of Plasticity Engineering, 2019, 26(3): 25-32.

[13]王志坚, 高昱霖,宋鸿武,等.短时局部热处理提高2B06铝合金口框零件成形性的模拟研究[J].锻压技术,2019,9(44):133-140.

Wang Z J, Gao Y L, Song H W, et al. Simulation study on formability improvement of 2B06 aluminum alloy frame through short time local heat treatment[J]. Forging & Stamping Technology, 2019, 9(44): 133-140.

[14]金飞翔, 钟志平,李凤娇,等.不同硬化模型对铝合金板冲压成形模拟结果的影响[J].机械工程学报,2017,11(53):57-66.

Jin F X, Zhong Z P, Li F J, et al. Influence of different hardening models on the simulation results of aluminum alloy sheet stamping[J]. Acta Mechanical Engineering, 2017, 11(53): 57-66.

服务与反馈：

【文章下载】【加入收藏】