锻压技术

基于小波分析的压力机振动信号处理与分析

英文标题：Processing and analysis on vibration signal for press based on wavelet analysis

作者：于涛刘国栋李金耀付吉发于蓉蓉

单位：山东科技大学

分类号：TH17

出版年,卷(期):页码：2022,47(2):152-157

摘要：

随着压力机使用时间的增加，故障问题频繁出现，严重影响了工厂的正常生产，为解决该问题，通过分析压力机振动信号对压力机进行故障诊断。以JM21-160曲柄压力机为研究对象，利用Matlab软件对简单、准确提取故障特征的方法进行了研究。以实际的压力机实验数据为基础，提出一种简便方法对数据进行小波去噪和时-频转换处理，此方法基于Matlab的小波工具箱进行的。最后，通过对数据去噪前后频谱图的对比分析，验证了该方法的有效性。该方法能够简化和提取数据中用于分析压力机故障的频率特征，对生产现场的压力机振动信号处理和分析具有参考价值。

With the increasing of use time for press, the fault problem of press occur frequently, which seriously affects the normal production of the factory. In order to solve this problem, the fault diagnosis of press was conducted by analyzing the vibration signal of press. For crank press JM21-160, the method of simply and accurately extracting the fault characteristics was studied by software Matlab. Based on the experimental data of the actual press, a simple method was proposed to process data by wavelet denoising and time-frequency conversion, which was based on Matlab wavelet toolbox, and the validity of this method was verified by contrast and analysis on the spectrums before and after data denoising. The result shows that this method can simplify and extract data to analyze the frequency characteristics of press fault and has reference value for press vibration signal processing and analysis in the production site.

基金项目：

青年科学基金资助项目（52005302）

作者简介：于涛（1972-），男，博士，教授,E-mail：yutaosang@163.com;通信作者：于蓉蓉（1990-），女，博士，讲师,E-mail：rongrongyu19@sdust.edu.cn

参考文献：

[1]于涛,刘广鹏,王月亮，等.基于MATLAB的L4-630E3型压力机的运动学分析[J].机械工程师,2016，(11):1-3.

Yu T,Liu G P,Wang Y L， et al.Kinematics analysis of L4-630E3-type press based on MATLAB[J].Mechanical Engineer,2016，(11):1-3.

[2]陈长征，胡立新，周勃，等.设备振动分析与故障诊断技术[M].北京：科学出版社，2007.

Chen C Z,Hu L X,Zhou B,et al.Equipment Vibration Analysis and Fault Diagnosis Technology[M].Beijing:Science Press,2007.

[3]宋雪萍,李朝峰,马辉,等.基于小波分析的旋转机械故障诊断技术及其试验研究[J].中国机械工程，2006,(S2): 328-331．

Song X P,Li C F,Ma H,et al.Faults diagnosis technology and experimental research on rotating machinery based on the wavelet analysis[J].China Mechanical Engineering,2006,(S2): 328-331．

[4]赵罘,辛洪兵,吕良.基于小波理论谐波减速器振动信号的降噪研究[J].吉林大学学报：信息科学版,2005,23(3):328-330．

Zhao F,Xin H B,Lyu L.Noise reduction of harmonic drive reducer vibration based on wavelet theory[J].Journal of Jilin University：Information Science Edition,2005,23(3):328-330．

[5]Nikolaou N G, Antoniadis I A. Rolling element bearing fault diagnosis using wavelet packets[J]. Coal Mine Machinery, 2009,35(3):197-205.

[6]Choe H，Technologies S，Wan T Y，et al. Neural pattern identification of railroad wheel-bearing faults from audible acoustic signals: Comparison of FFT, CWT, and DWT features[J]. Proceedings of SPIE-The International Society for Optical Engineering,1997,3078:480-496.

[7]徐海涛,焦倓.基于小波分析的振动压路机加速度信号处理[J].公路交通科技：应用技术版,2017,13(6):159-160.

Xu H T,Jiao T.Acceleration signal processing of vibratory roller based on wavelet analysis[J].Highway Traffic Technology：Applied Technology Version，2017,13(6):159-160.

[8]朱希安,金声震,宁书年，等.小波分析的应用现状及展望[J].煤田地质与勘探,2003，(2):51-55.

Zhu X A,Jin S Z,Ning S N,et al.The application status and outlook of wavelets analysis[J].Coal Geology & Exploration,2003，(2):51-55.

[9]蔡静.MATLAB R2015a 小波分析[M].北京：清华大学出版社，2016.

Cai J.MATLAB R2015a wavelet analysis[M].Beijing:Tsinghua University Press,2016.

[10]何思源,李贵元,刘华姣，等.最优小波基选择法在测震数据干扰处理中的研究与应用[J].华南地震,2019,39(3):49-56.

He S Y,Li G Y,Liu H J,et al.Application and research of optimal wavelet base selection method in seismic data processing[J].South China Journal of Seismology,2019,39(3):49-56.

[11]陈泽鑫.小波基函数在故障诊断中的最佳选择[J].机械科学与技术,2005，24(2):172-175，243.

Chen Z X.The selection of wavelet base in malfunction diagnosis[J].Mechanical Science and Technology,2005，24(2):172-175，243.

[12]陈李果,汪久根,张靖.基于小波理论的RV减速器振动信号分析[J].机械传动,2018,42(5):14-17，36.

Chen L G,Wang J G,Zhang J.Vibration signal analysis of RV reducer based on wavelet theory[J].Journal of Mechanical Transmission,2018,42(5):14-17，36.

[13]丁康，李巍华，朱小勇.齿轮及齿轮箱故障诊断实用技术[M].北京：机械工业出版社，2005.

Ding K,Li W H,Zhu X Y.Practical Technology of Gear and Gearbox Fault Diagnosis[M].Beijing: China Machine Press, 2005.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】