网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
多层板高性能冲铆连接及铆钉形状合理性探讨
英文标题:Investigation on multi-layer plates by high performance self-piercing riveting and rationality of rivet profile
作者:赵旭哲 
单位:阿诺德紧固件有限公司 
关键词:轻量化板材 多层板材 冲铆连接 塑性变形 铆钉 无铆塑性连接 
分类号:
出版年,卷(期):页码:2022,47(4):21-36
摘要:

 简述了现代工业对轻量化板材需求的迫切性,分析了多层轻量化板材连接的传统工艺存在的不足,阐述了多层板材塑性变形连接方式中有铆钉和无铆钉两种工艺的原理和工艺过程、优缺点。主要论述了有铆钉的冲铆塑性连接工艺的发展历程、应用领域、塑性连接机理和材料塑性流动行为。重点研究了铆钉形状为杯型、软与硬圆柱型、腰鼓型、尖头螺钉刺穿型等的有铆钉冲铆塑性连接的工艺过程、连接机制及其连接性能。进一步总结了平底无铆连接、传统无铆连接、典型形状铆钉的锁铆连接、点焊、传统铆接、胶接等方式的连接质量及其特点。为工业实际中推广和应用多层板材有铆钉塑性变形连接方式奠定坚实的基础。

 The urgent demand of modern industry for lightweight plates was briefly described, the shortcomings of the traditional process for connecting multi-layer lightweight plates were analyzed, and for the plastic deformation connection method of multi-layer plates, the principle, process, advantages and disadvantages of two processes with rivet and without rivet were expounded. Then, the development history, application fields, plastic connection mechanism and material plastic flow behavior for plastic connection process of self-piercing riveting with rivet were mainly discussed, and the process, connection mechanism and connection performance for plastic connection of self-piercing riveting with rivet shapes such as cup shapes, soft and hard cylindrical shape, waist drum shape and pointed screw piercing shape were manly studied. Furthermore, the connection quality and characteristics of flat-anvil cliching, traditional cliching, lock riveted connection of typical shape rivet, spot welding, traditional riveting and adhesive bonding were further summarized, which built the solid foundation for the popularization and application of multi-layer plates with rivet plastic deformation connection method in industrial practice.

 
基金项目:
作者简介:
赵旭哲(1987-),男,博士,首席应用工程师 E-mail:zhao636@purdue.edu
参考文献:

 [1]杨合,李落星,王渠东,等. 轻合金成形领域科学技术发展研究[J]. 机械工程学报, 2010, 46(12): 31-42.


Yang H, Li L X, Wang Q D, et al. Research on the development of advanced forming for lightweight alloy materials area [J]. Journal of Mechanical Engineering, 2010, 46(12): 31-42.

[2]彭斐. 轻量化材料驱动汽车未来[J]. 汽车与配件, 2014, (10): 43-45.

Peng F. Lightweight materials drive the car of the future [J]. Automobile & Parts, 2014, (10): 43-45.

[3]孙希庆,李军,陈云霞.汽车用6016铝合金板的连接性能研究[J].汽车工艺与材料,2013,(8):30-33.

Sun X Q, Li J, Chen Y X. Study on joint performance of 6016 aluminum alloy plate for automobile [J].Automobile Technology & Material,2013,(8):30-33.

[4]赵培峰.6061铝合金楔横轧变形研究[D].北京:中国机械科学研究总院集团有限公司,2006.

Zhao P F. Study of Deformation of 6061 Aluminium Alloy in the Process of Cross Wedge Rolling[D].Beijing:China Academy of Machinery Science and Technology Group,2006.

[5]刘文海.铝合金车体及底盘之发展动向[J].机械工业,2006,281(8):75-89.

Liu W H. Development trend of aluminum alloy car body and chassis [J]. Machinery Industry,2006,281(8):75-89.

[6]韩方圆,崔令江.铝合金板材在汽车生产中的应用[J].锻压装备与制造技术,2013,48(3):85-88.

Han F Y, Cui L J. Application of aluminum alloy sheet in automobile production [J].China Metalforming Equipment & Manufacturing Technology,2013,48(3):85-88.

[7]Carle D, Blount G. The suitability of aluminum as an alternative material for car bodies[J]. Materials and Design, 1999,20(5):267-272.

[8]农琪,谢业东,金长义,等. 铝合金焊接技术的研究现状与展望[J]. 热加工工艺, 2013, 42(9): 160-162,165.

Nong Q, Xie Y D, Jin C Y, et al. Reaserch status and perspectives of welding process for aluminum alloy[J]. Hot Working Technology, 2013, 42(9): 160-162,165.

[9]李亚江. 轻金属焊接技术[M].北京:国防工业出版社,2011.

Li Y J. Light Metal Welding Technology[M].Beijing:National Defence Industry Press,2011.

[10]李永兵,李亚庭,楼铭,等. 轿车车身轻量化及其对连接技术的挑战[J]. 机械工程学报, 2012, 48(18): 44-54.

Li Y B, Li Y T, Lou M, et al. Lightweighting of car body and its challenges to joining technologies[J]. Journal of Mechanical Engineering, 2012, 48(18): 44-54.

[11]Miyagawa K, Tsubaki M, Yasui T, et al. Spot welding between aluminium alloy and low-carbon steel by friction stirring[J]. Welding International, 2009, 23(8): 559-564.

[12]Feng Z, Santella M, David S, et al. Friction stir spot welding of advanced high-strength steels-A feasibility study[A]. SAE Technical Paper[C]. Detroit, 2005.

[13]Lee C Y, Choi D H, Yeon Y M, et al. Dissimilar friction stir spot welding of low carbon steel and Al-Mg alloy by formation of IMCs[J]. Science and Technology of Welding & Joining, 2013, 3:216-220.

[14] L′,   E, Mucha J. Evaluation of properties of joints made by clinching and self-piercing riveting methods[J]. Acta Metallurgica Slovaca, 2012, 18(4): 172-180.

[15]Su Z M, Lin P C, Lai W J, et al. Fatigue analyses of self-piercing rivets and clinch joints in lap-shear specimens of aluminum sheets[J]. International Journal of Fatigue, 2015, 72: 53-65.

[16]Li D, Chrysanthou A, Patel I, et al. Self-piercing riveting-A review[J]. International Journal of Advanced Manufacturing Technology, 2017, 92(5-8): 1777-1824.

[17]Cacko R. Review of different material separation criteria in numerical modeling of the self-piercing riveting process-SPR[J]. Archives of Civil and Mechanical Engineering, 2008, 8(2): 21-30.

[18]Meschut G, Janzen V, Olfermann T. Innovative and highly productive joining technologies for multi-material lightweight car body structures[J]. Journal of Materials Engineering and Performance, 2014, 23(5): 1515-1523.

[19]何晓聪. 薄板材料连接新技术[M].北京:冶金工业出版社, 2016.

He X C. New Technology of Thin Plate Material Connection[M]. Beijing:Metallurgical Industry Press, 2016.

[20]Zhao X, Meng D, Zhang J, et al. The effect of heat treatment on die casting aluminum to apply self-pierce riveting[J]. The International Journal of Advanced Manufacturing Technology, 2019, 109(9): 2409-2419.

[21]Meschut G, Matzke M, Hoerhold R, et al. Hybrid technologies for joining ultra-high-strength boron steels with aluminum alloys for lightweight car body structures[J]. Procedia CIRP, 2014, 23: 19-23.

[22]Neugebauer R, Jesche F, Israel M. Enlargement of the application range of solid punch riveting by two-piece dies[J]. International Journal of Material Forming, 2010, 3(1): 999-1002.

[23]Mucha J. The effect of material properties and joining process parameters on behavior of self-pierce riveting joints made with the solid rivet[J]. Materials & Design, 2013, 52: 932-946.

[24]Lee C J, Kim J Y, Lee S K, et al. Parametric study on mechanical clinching process for joining aluminum alloy and high-strength steel sheets[J]. Journal of Mechanical Science and Technology, 2010, 24(1): 123-126.

[25]Lambiase F, Di Ilio A. Finite element analysis of material flow in mechanical clinching with extensible dies[J]. Journal of Materials Engineering And Performance, 2013, 22(6): 1629-1636.

[26]Han X, Zhao S, Liu C, et al. Optimization of geometrical design of clinching tools in clinching process with extensible dies[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017, 231(21): 3889-3897.

[27]Schubert H, Mhring J. Flexible material joining technology for tomorrow’s innovative lightweight design[A]. Tagungsband Fügen im Karosserieba [C]. Germany,2012.

[28]Miles M, Hong S T, Woodward C, et al. Spot welding of aluminum and cast iron by friction bit joining[J]. International journal of Precision Engineering and Manufacturing, 2013, 14(6): 1003-1006.

[29]Kimapong K, Watanabe T. Effect of welding process parameters on mechanical property of FSW lap joint between aluminum alloy and steel[J]. Materials Transactions, 2005, 46(10): 2211-2217.

[30]Fei X, Jin X, Ye Y, et al. Effect of pre-hole offset on the property of the joint during laser-assisted friction stir welding of dissimilar metals steel and aluminum alloys[J]. Materials Science and Engineering: A, 2016, 653: 43-52.

[31]Skovron J D, Ulutan D, Mears L, et al. Effect of thermal assistance on the joint quality of al6063-t5a during flow drill screwdriving[A]. ASME 2015 International Manufacturing Science and Engineering Conference[C]. Charlotte,2015. 

[42]Atabaki M M, Nikodinovski M, Chenier P, et al. Welding of aluminum alloys to steels: An overview[J]. Journal for Manufacturing Science and Production, 2014, 14(2): 59-78.

[43]Chen C, Zhao S, Han X, et al. Optimization of a reshaping rivet to reduce the protrusion height and increase the strength of clinched joints[J]. Journal of Materials Processing Technology, 2016, 234: 1-9.

[34]Chen C, Zhao S, Cui M, et al. Mechanical properties of the two-steps clinched joint with a clinch-rivet[J]. Journal of Materials Processing Technology, 2016, 237: 361-370.

[35]Zhao X, Zhang J, Chu Y, et al. Research on joining high pressure die casting parts by self-pierce riveting (SPR) using ring-groove die comparing to heat treatment method[A]. WCX SAE World Congress Experience[C]. Detroit,2020.

[36]朱正行,严向明,王敏. 电阻焊技术[M] . 北京:机械工业出版社,2000.

Zhu Z X, Yan X M, Wang M. Resistance Welding Technique[M]. Beijing:China Machine Press,2000.

[37]陈欲川. 现代焊接生产实用手册[M] . 北京:机械工业出版社,2005.

Chen Y C. Practical Manual for Modern Welding Production[M]. Beijing:China Machine Press,2005.

[38]赵熹华,冯吉才. 压焊方法及设备[M] . 北京:机械工业出版社,2005.

Zhao X H, Feng J C. Pressure Welding Method and Equipment[M] . Beijing:China Machine Press,2005.

[39]李亚江,王娟,刘鹏. 特种焊接技术及应用[M]. 北京:化学工业出版社,2004.

Li Y J, Wang J, Liu P. Special Welding Technology and Application[M] . Beijing:Chemical Industry Press,2004.

[40]Zhao X Z.Research on Applying the Self-pierce Riveting (SPR) for Die Casting Aluminum Alloys [D].West Lafayette:Purdue University,2019.

[41]任家烈,吴爱萍. 先进材料的连接[M] . 北京:机械工业出版社,2000.

Ren J L, Wu A P. Advanced Material Connection [M]. Beijing:China Machine Press,2000.
服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9