锻压技术

立式九辊轧机的孔型标定与调整

英文标题：Groove calibrating and adjusting for vertical nine-high rolling mill

作者：白辉东刘华堂侯沛云

分类号：TG33；TH-39

出版年,卷(期):页码：2022,47(5):181-187

摘要：

为了提高立式九辊轧机轧制孔型标定和孔型调整的精度和效率、提高轧制毛坯的形状尺寸精度、降低生产成本，研究了轧制孔型标定的原理，建立了孔型标定时和轧制结束瞬间两种状态之间的轧辊位置关系，提出了孔型标定的方法；研究了轧制过程中轧辊的运动规律，通过将辐板辊的圆周摆动运动分解为沿车轮轴向和径向的运动，分别研究了轧制时辐板辊沿车轮轴向和径向的位移参数，提出了孔型调整的方法；设计了可以测量轧辊相对空间位置关系的专用工具，辅助孔型标定和孔型调整。生产实践表明，提出的轧制孔型标定和孔型调整方法提高了车轮轧制毛坯的形状和尺寸精度，同时提高了孔型标定和孔型调整的效率。

In order to improve the accuracy and efficiency of rolling groove calibration and groove adjustment for vertical nine-high rolling mill，improve the shape and dimension accuracy of rolling blank, and reduce the production cost, the rolling groove calibration principle was researched, the positional relationship of rolls between the two states for groove calibration and end moment of rolling was established, and the method of groove calibration was proposed. Then, the movement law of roll during the rolling process was studied, and by decomposing the circular oscillating motion of web roll into the movements of wheel along the axis and radial directions, the displacement parameters of web roll along the axis and radial directions for wheel during the rolling was researched respectively to propose the groove adjustment method. Furthermore, the special tool for measuring the relative spatial position of rolls was designed to assist the groove calibration and groove adjustment. The results of production show that the rolling groove calibration and groove adjustment method can improve the shape and dimension accuracy of rolling blank for wheel, and at the same time improve the efficiency of groove calibration and groove adjustment.

基金项目：

作者简介：白辉东（1989-），男，硕士，工程师，E-mail：WYiang@126.com

参考文献：

[1] 李有智，季业益,陶宝山，等. 轧辊辊缝差和轧机组装间隙对精轧钢带尾板侧偏的影响[J].锻压技术,2021,46(1):116-125.

Li Y Z,Ji Y Y,Tao B S,et al. Influence of roll gap difference and mill assembly gap on side deviation of finished steel strip tail plate[J].Forging & Stamping Technology,2021,46(1):116-125.

[2] 王飞龙. 大扁豆花纹板轧辊孔型设计合理性评价及验证[J].锻压技术,2020,45(12):21-27.

Wang F L. Evaluation and verification of design rationality for roll pass of large lentil-shaped checkered plate[J].Forging & Stamping Technology,2020,45(12):21-27.

[3] 常彬彬, 帅美荣,刘鑫.棒材三辊孔型自由宽展流动模型[J].锻压技术,2021,46(11):207-214.

Chang B B，Shuai M R，Liu X.Flow model of free spread in three-roll passes of rod[J].Forging & Stamping Technology, 2021,46(11):207-214.

[4] 贾志伟, 张海利,庞树芳,等. ZR22B52型20辊轧机辊系空间位置模型研究[J].鞍钢技术,2019,57(6):30-34.

Jia Z H, Zhang H L, Pang S F,et al.Study on space position model for roll system in ZR22B52″ 20-H rolling mill[J]. Angang Technology,2019,57(6):30-34.

[5] 高强, 田宇,李大华,等. 冷弯型钢机组轧辊位置自动调整控制系统的研究与改进[J].现代制造工程,2019,43(11):117-122.

Gao Q，Tian Y，Li D H,et al. Research and improvement of roll position automatic adjustment control system for cold formed steel unit[J]. Modern Manufacturing Engineering,2019,43(11):117-122.

[6] 张鹏飞. 热轧轧机辊缝标定系统优化研究[J].现代信息科技,2019,3(18):141-145.

Zhang P F. Research on optimization of roll gap calibration system for hot rolling mill[J].Modern Information Technology,2019,3(18):141-145.

[7] 岳殿佐, 侯玉双. CSP生产线轧机自动标定过程分析[J].包钢科技,2017,43(5):76-82.

Yue D Z, Hou Y S. Analysis on automatic calibration process of rolling mill in CSP production line[J]. Science & Technology of Baotou Steel, 2017,43(5):76-82.

[8] 康永林，朱国明,陶功明，等. 高精度型钢轧制数字化技术及应用[J].钢铁,2017,52(3):55-63.

Kang Y L，Zhu G M，Tao G M，et al. Digital technology and application of high precision section steel rolling[J].Iron and Steel,2017,52(3):55-63.

[9] 陈金山，王君，曹勇.冷连轧过程控制系统的自适应功能实现[J].中国冶金,2016,26(6):51-56.

Chen J S,Wang J,Cao Y. Development of self-adaption function for control system for tandem cold rolling process[J].China Metallurgy,2016,26(6):51-56.

[10]高健. 冷轧机辊缝位置精确控制技术的研究[D].哈尔滨: 哈尔滨工业大学,2016.

Gao J.Research on Precision Control Technology of Roll Gap Position in Cold Rolling Mill[D].Harbin：Harbin Institute of Technology，2016.

[11]曹文豪. 轧机自动辊缝标定技术[J].冶金丛刊,2011,（1）:28-31,34.

Cao W H. Technology of roll gap automatic calibration[J].Metallurgical Collections，2011,（1):28-31，34.

[12]张岩, 邵富群,王生均,等. 冷连轧机辊缝自动标定原理及应用[J].冶金自动化,2009,33(5):33-37.

Zhang Y,Shao F Q,Wang S J,et al. Theory and application of roll gap automatic calibration in tandam cold mill[J].Metallurgical Industry Automation,2009,33(5):33-37.

[13]郭拉凤. 线材轧机孔型系统及调整[J].现代制造工程,2006,43(3):130-131.

Guo L F. Opening-mold system and adjustment of rolling mill for wire rod[J].Modern Manufacturing Engineering,2006,43(3):130-131.

[14]吴江淮, 许章泽. 辗钢车轮立式轧机辊系的调整方法[J].轨道交通装备与技术,2006,28(8):11-13.

Wu J H,Xu Z Z.Adjustment of the roller assembly of the vertical rolling machine for rolled steel wheel[J].Rail Transportation Equipment and Technology,2006,28(8):11-13.

服务与反馈：

【文章下载】【加入收藏】