锻压技术

板线材金属弹簧双向弹片复合成形设备设计

英文标题：Design of compound forming device for metal spring bidirectional shrapnel of plate and wire materials

作者：冯赞1 王超1 王成1 2 3 芮延年2

单位：1.苏州经贸职业技术学院机电技术学院 2. 苏州大学机电工程学院 3.江苏省光伏风电控制工程技术研究中心

分类号：TG386

出版年,卷(期):页码：2022,47(6):224-230

摘要：

针对金属弹片产品在加工成形时加工工序冗繁、加工效率低以及需要多次定位等问题，通过对产品材料、结构要求、成形工艺等方面的分析研究，采用板线材间歇自动送料+连续冲切+数控折弯的成形工艺，提出一种金属弹簧双向弹片的成形设备，包括冲切机构和成形机构，冲切机构用于在板线材上冲切多个依次连接的预制品，成形机构用于成形弹片。通过生产试验可知，此成形设备不仅可以保证产品的精度、节省材料,还可以缩短研发周期、降低成本，证明了板线材成形设备结构的先进性、可行性和实用性，为该技术的应用推广奠定了实践基础。

In order to solve the problems of cumbersome processing procedures, low processing efficiency and the need for multi positioning when metal shrapnel products are processed and formed, through the analysis and research on product materials, structural requirements, forming processes, etc., the forming process of the intermittent automatic feeding of plate and wire materials, continuous punching and numerical control bending was adopted. A metal spring bidirectional shrapnel forming device was proposed, which included a punching mechanism and a forming mechanism. The punching mechanism was used for punching a plurality of sequentially connected pre-products on the plate and wire materials, and the forming mechanism was used for forming elastic pieces.Through the production test, the forming device can be known that the forming device can not only ensure the accuracy of product and save materials, but also shorten the research and development cycle and reduce the cost. It proves the advancement, feasibility and practicability of forming device structure of plate and wire materials, and lays a practical foundation for the application and promotion of the technology.

基金项目：

国家高技术研究发展计划（2012AA063506）；苏州市重点产业技术创新项目（SGC2021111）；苏州市应用基础研究计划项目（SNG2020050）；苏州经贸职业技术学院企业横向课题（JMH202004）;苏州市教育科研规划项目(2021JG004);江苏省高等学校大学生创新创业训练计划项目(202112685005Y)

冯赞（2000-），男，专科 E-mail： 2784727769@qq.com 通信作者：王超（1989-），男，博士，讲师 E-mail：wc181674@163.com

参考文献：

[1]董俊华. 金属弹片级进模设计[J]. 模具工业, 2014, 40(3):27-30.

Dong J H. Design of progressive die for metallic elastic strip[J]. Die & Mould Industry, 2014, 40(3):27-30.

[2]李畅毅. 音圈马达下弹片折弯及装配机器的设计 [D]. 广州：华南理工大学, 2018.

Li C Y. Design of Bending and Assembly Machine for Voice Coil Motor B-spring[D]. Guangzhou: South China University of Technology, 2018.

[3]杨荣祥, 金龙建．窗帘支架扣件多工位级进模设计[J].制造技术与机床，2016，(9): 137-140．

Yang R X，Jin L J． Design of multi position progressive die for curtain bracket fastener[J]．Manufacturing Technology & Machine Tool，2016，(9): 137-140．

[4]部绍明, 宋良超, 吴忠. 一种踏板冲压成型工艺及模具设计[J]. 制造技术与机床, 2016，(12):109-111.

Bu S M, Song L C, Wu Z. Design of pedal punch-forming process and die[J]. Manufacturing Technology & Machine Tool, 2016，(12):109-111.

[5]赵燕, 闫志彩. 小型冲压模具成形工艺及模具设计[J]. 模具制造, 2022, 22(1):12-16.

Zhao Y, Yan Z C. Forming process and die design of small stamping die[J]. Die & Mould Manufacture, 2022, 22(1):12-16.

[6]匡和碧. 冲压模具设计实用教程[M]. 北京: 化学工业出版社, 2014.

Kuang H B. Stamping Die Design Practical Tutorial[M]. Beijing: Chemical Industry Press, 2014.

[7]肖祥芷, 王孝培. 中国模具设计大典(第3卷)冲压模具设计[M]. 南昌:江西科学技术出版社, 2003.

Xiao X Z, Wang X P. China Die & Mould Design Canon (Vol.3) Design on Stamping Die[M]. Nanchang: Jiangxi Science & Technology Press, 2003.

[8]洪慎章. 实用冲压工艺及模具设计[M]. 2版. 北京: 机械工业出版社, 2015.

Hong S Z. Practical Stamping Process and Die Design [M].2nd Edition. Beijing: China Machine Press，2015.

[9]袁泉, 刘光超. 开关簧片冲压工艺分析及模具设计[J]. 制造技术与机床, 2014,(10):150-152,163.

Yuan Q, Liu G C, Stamping process analysis and mould design of spring sheet of switch[J]. Manufacturing Technology & Machine Tool, 2014, (10):150-152,163.

[10]邹栋林, 谢黎明, 孟玉喜. 插座簧片多工位级进模设计[J]. 锻压装备与制造技术, 2006，41(6): 72-75.

Zou D L，Xie L M, Meng Y X. Design of the multi-position pro-gressive die for reeds of connector jack[J]. China Metal Forming Equipment & Manufacturing Technology, 2006，41(6): 72-75.

[11]曾志芳.动触片开关冲压工艺分析及模具设计[J].模具制造, 2021, 21(4):89-92.

Zeng Z F. Stamping process analysis and die design of moving contact switch[J]. Die & Mould Manufacture, 2021, 21(4):89-92.

[12]冯赞，王成，朱乐平. 一种金属弹簧双向弹片成型设备及其成型方法[P]. 中国:CN 202010421476.8, 2020-08-18.

Feng Z, Wang C, Zhu L P. A metal spring bidirectional shrapnel forming equipment and its forming method[P]. China: CN 202010421476.8,2020-08-18.

[13]黄家强.冷冲压级进冲裁模具结构的优化设计[J].装备制造技术, 2020,(6):188-190,196.

Huang J Q. Optimal design of die structure for cold stamping progressive blanking[J]. Equipment Manufacturing Technology, 2020,(6):188-190,196.

服务与反馈：

【文章下载】【加入收藏】