锻压技术

基于响应面的TA1钛合金内螺纹管芯轴结构参数优化

英文标题：Optimization on structural parameters of mandrel for TA1 titanium alloy internal thread pipe based on response surface

作者：黎华杰李旭东熊振张征浩黄东男

单位：1.内蒙古工业大学材料科学与工程学院 2.中铝材料应用研究院有限公司

关键词：内螺纹管芯轴挤压响应面法粒子群算法

分类号：TG379

出版年,卷(期):页码：2022,47(9):126-134

摘要：

为了得到芯轴最优的结构参数，采用响应面法以螺纹长度L、螺纹升角φ1及芯轴迎角φ2为设计变量，以螺纹管料头齿部的速度相对差值VRD1与管壁的速度相对差值VRD2及挤压成形最大载荷F为优化目标参数，建立了多响应回归模型，采用粒子群算法对已建立的多响应回归模型进行全局寻优，最终得到内螺纹管芯轴的最优参数为：螺纹长度L=11 mm、螺纹升角φ1=30°以及芯轴迎角φ2=96°。优化后的VRD1减小了50.38%，VRD2减小了44.81%，F值减小了5.10%，采用最优芯轴结构参数进行模具加工并进行挤压试验，得到了质量合格的TA1钛合金内螺纹管。结果表明，采用响应面法优化后的芯轴结构可以提高挤压过程中金属的流动性，减小模具的最大成形载荷，提高内螺纹管的成形质量。

In order to obtain the optimal structural parameters of mandrel, taking thread length L, thread lift angle φ1 and attack angle of mandrel φ2 as the design variables, and taking velocity relative difference VRD1 of material head tooth in thread pipe, velocity relative difference VRD2 of pipe wall and maximum load F of extrusion forming as the optimization target parameters, the multi-response regression model was established. Then, the established multi-response regression model was globally optimized by particle swarm algorithm, and the optimal parameters of internal thread pipe mandrel were finally obtained as the thread length L=11 mm, the thread lift angle φ1=30°, and the attack angle of mandrel φ2=96°. Furthermore, after optimization, VRD1 was reduced by 50.38%, VRD2 was reduced by 44.81%, and F value was decreased by 5.10%. Finally, the mold was processed by the optimal structure parameters of mandrel, and the extrusion test was conducted to obtain the qualified TA1 titanium alloy internal thread pipe. The results show that the mandrel structure optimized by the response surface method can improve the fluidity of metal in the extrusion process, reduce the maximum forming load of mold, and improve the forming quality of internal thread pipe.

基金项目：

国家自然科学基金地区科学基金资助项目（5186050063）

黎华杰（1996-），男，硕士研究生 E-mail：1679860680@qq.com 通信作者：黄东男（1979-），男，博士，教授 E-mail：huangdongnan@cmari.com

参考文献：

[1]Searle M, Black J, Straub D, et al. Heat transfer coefficients of additively manufactured tubes with internal pin fins for supercritical carbon dioxide cycle recuperators[J]. Applied Thermal Engineering, 2020, 181: 116030.

[2]Lin S S, Zhao H Y, Zhu L P, et al. Seawater desalination technology and engineering in China: A review[J]. Desalination, 2021, 498：114728.

[3]Wake H, Takahashi H, Takimoto T, et al. Development of an electrochemical antifouling system for seawater cooling pipelines of power plants using titanium[J]. Biotechnology and Bioengineer-ing, 2010, 95(3): 468-473.

[4]熊从贵,林通,王昕光,等.船用冷凝器换热管的失效分析[J].机电工程, 2014, 31(6): 753-756.

Xiong C G, Lin T, Wang X G, et al. Failure analysis of heat exchange tubes for marine condensers [J]. Mechanical and Electrical Engineering, 2014, 31(6): 753-756.

[5]Zhou B H, Zhai Z Q. Failure probabilistic analysis of steam generator heat-transfer tubing with pitting corrosion[J]. Engineering Failure Analysis, 2011, 18(5): 1333-1340.

[6]Gong Y, Yang C, Yao C, et al. Acidic/caustic alternating corrosion on carbon steel pipes in heat exchanger of ethylene plant[J]. Materials and Corrosion, 2011, 62(10): 967-978.

[7]Kuboki T, Ishikawa M, Kajikawa S, et al. An extrusion method of tube with spiral inner fins by utilizing generation of spiral outer fins/grooves[J]. CIRP Annals-Manufacturing Technology, 2018， 67(1):305-308.

[8]黄东男, 申浩辰, 杜赵新, 等. 一种内螺纹管的挤压设备及加工方法[P]. 中国:CN111036809A, 2020-04-21.

Huang D N, Shen H C, Du Z X, et al. An extrusion equipment and processing method for an internally threaded pipe [P]. China: CN111036809A, 2020-04-21.

[9]王勇，张鹏，张晔，等.基于响应面法的花键套振动冷挤压参数多目标优化[J].塑形工程学报,2022,29(4):7-13.

Wang Y, Zhang P, Zhang Y, et al. Multi-objective optimization of vibration cold extrusion parameters of spline bushes based on response surface method [J]. Chinese Journal of Plastic Engineering, 2022, 29(4): 7-13.

[10]方华. 基于粒子群算法的等温挤压能耗优化[D]. 广州: 广东工业大学, 2019.

Fang H. Energy Consumption Optimization of Isothermal Extrusion Based on Particle Swarm Optimization [D]. Guangzhou: Guangdong University of Technology, 2019.

[11]Kennedy J, Eberhart R. Particle swarm optimization[A]. Icnn 95-international Conference on Neural Networks[C]. IEEE, 1995.

[12]JM Sánchez-Lozano, ON Rodríguez. Application of fuzzy reference ideal method (FRIM) to the military advanced training aircraft selection[J]. Applied Soft Computing, 2020, 88: 106061.

[13]Chen X, Huang J, Yi M. Development cost prediction of general aviation aircraft using combined estimation technique[J]. Chinese Journal of Aeronautics, 2021,34(4):32-41.

服务与反馈：

【文章下载】【加入收藏】