锻压技术

基于多项式拟合算法的重型电动数控螺旋压力机机身的轻量化

英文标题：Lightweight on heavy-duty electric CNC screw press body based on polynomial fitting algorithm

单位：1.山东理工大学机械工程学院 2.青岛宏达锻压机械有限公司 3. 山东省沂水县检验检测中心

分类号：TP203

出版年,卷(期):页码：2022,47(12):154-160

摘要：

螺旋压力机的结构与刚度的关系一直是锻压装备设计时的重要参考，通常采用计算许用应力得到的机械结构，其刚度足够但设备笨重。针对此问题，建立EP-10000的参数化模型并进行尺寸改动，并利用ANSYS对模型进行受力分析，得到不同尺寸的压力机在100 MN工作状态下的刚度及变形数值。运用多项式拟合优化算法，建立变形和整机长度与宽度、立柱宽度之间的数学模型。得到在100 MN工作状态下，最小变形量为0.89873 mm，此时对应的整机尺寸为6700 mm×4126 mm×11385 mm，立柱宽度为3400 mm，整机减重约7.9%，并且在此尺寸下强度为75 MPa，满足需求。结果表明，该方法可以得到高刚度、轻量化的压力机机身。

The relationship between structure and stiffness of screw press has always been an important reference in the design of forging equipment. Generally, the mechanical structure obtained by calculating the allowable stress was used, which has sufficient stiffness but bulky equipment. To solve this problem, a parameterized model of EP-10000 was established and its dimensions were changed. The force analysis of the model was carried out by ANSYS, and the stiffness and deformation values of presses with different sizes were obtained under the working condition of 100 MN. Polynomial fitting optimization algorithm was used to establish the mathematical models between the deformation and the length and width of the whole machine and the column width, and under the working condition of 100 MN, the minimum deformation was 0.89873 mm. At this time, the corresponding size of the whole machine was 6700 mm×4126 mm×11385 mm，the column width was 3400 mm, the weight of the whole machine was reduced by about 7.9%, and the strength under this size was 75 MPa, which met the demand. The results show that the high stiffness and lightweight press body can be obtained by this method.

基金项目：

2022年青岛市科技计划重点研发专项（22-3-2-qljh-10-gx）

徐双（1996-），女，硕士研究生 E-mail： IEGIM2019@163.com 通信作者：赵国勇（1976-），男，博士,教授,博士生导师 E-mail：zgy709@126.com

参考文献：

[1]郭晓心.青岛宏达深耕行业行稳致远[J].锻造与冲压,2021，(15):42-45.

Guo X X. Qingdao HongDa, deep ploughing industry steady[J]. Forging & Stamping, 2021，(15):42-45.

[2]钱抗抗. JG21-250A型压力机机身的有限元分析及其优化设计[D].青岛：山东科技大学,2008.

Qian K K. JG21-250A Finite Element Analysis and Optimization Design of Press Body[D]. Qingdao: Shandong University of Science and Technology,2008.

[3]李艳聪,张连洪,刘占稳,等.基于神经网络和遗传算法的液压机上梁轻量化和刚度优化设计[J].机械科学与技术, 2010,29(2):164-169.

Li Y C, Zhang L H, Liu Z W, et al. Lightweight and stiffness optimization design of hydraulic press upper beam based on neural network and genetic algorithm[J]. Mechanical Science and Technology

for Aerospace Engineering, 2010,29(2):164-169.

[4]杨海东. 考虑疲劳寿命的L4S800-MB压力机上横梁结构优化[D].秦皇岛：燕山大学,2018.

Yang H D. Structural Optimization of L4S800-MB Press Beam Considering Fatigue Life[D].Qinhuangdao: YanShan university,2018.

[5]牛军燕,唐永涛,李正辉,等. 基于ANSYS的带式输送机机架轻量化改进研究[J].煤矿机械, 2021,42(9):126-128.

Niu J Y, Tang Y T, Li Z H, et al. Research on lightweight improvement of belt conveyor frame based on ANSYS[J]. Coal Mine Machinery, 2021,42(9):126-128.

[6]Matteo S, Michele M, Andrea R. Optimized design of press frames with respect to energy efficiency[J]. Journal of Cleaner Production, 2013, 41:140-149.

[7]姜长升,陈启升,吴霞,等.JA36-630E压力机组合机身的预紧力研究[J].锻压装备与制造技术,2019,54(1):17-21.

Jiang C S, Chen Q S, Wu X，et al. Study on preload of JA36-630E press combined body[J].

Forging Equipment & Manufacturing Technology, 2019,54(1):17-21.

[8]贾先,赵升吨,范淑琴, 等.双动压力机用压边滑块串联四连杆工作机构的优化[J].中国机械工程,2016,27(9):1223-1228.

Jia X, Zhao S D, Fan S Q，et al. Optimization of blank-holder slider series four-bar working mechanism for double action press[J]. China Mechanical Engineering, 2016,27(9):1223-1228.

[9]黄俊卿，王团，李光辉，等.基于有限元分析的某型装甲设备毁伤仿真[J].系统仿真学报，2018,30(9):3327-3332.

Huang J Q, Wang T, Li G H， et al. Damage simulation of armored equipment based on finite element analysis[J]. Journal of Systerm Simulation，2018,30(9):3327-3332.

[10]王登峰,李慎华.基于Pareto挖掘的白车身侧碰安全件轻量化优化设计[J].中国机械工程, 2021,32(13):1584-1590，1637.

Wang D F, Li S H. Lightweight optimization design of biw side collision safety parts based on Pareto mining[J]. China Mechanical Engineering, 2021,32(13):1584-1590，1637.

[11]Zhao X H, Liu Y X, Hua L, et al. Finite element analysis and topology optimization of a 12000 kN fine blanking press frame[J]. Structural and Multidisciplinary Optimization, 2016, 54(2):375-389.

[12]陈聪. 高速压力机机构优化设计及轻量化研究[D]. 大连: 大连理工大学,2021.

Chen C. Research on Optimization Design and Lightweight of High Speed Press Mechanism[D]. Dalian: Dalian University of Technology, 2021.

服务与反馈：

【文章下载】【加入收藏】