锻压技术

Q195低碳钢冷顶锻开裂类型原因分析及改进措施

英文标题：Cause analysis and improvement measures of cold heading cracking types for Q195 low-carbon steel

作者：李若冰杨正

单位：廊坊燕京职业技术学院

分类号：TG335.6

出版年,卷(期):页码：2023,48(2):36-43

摘要：

针对Q195低碳钢盘条在冷顶锻时产生的开裂问题，进行了6组试验，并根据裂纹特征对开裂类型进行了分类和研究。使用扫描电镜等设备对开裂试样的成分、铸坯、母材和微观形貌进行了观察，阐明了密集排列起皮开裂和划伤折叠开裂的主要原因，并提出了相应的改进措施。结果表明：密集排列起皮开裂主要是由于铸坯表面或近表面存在微裂纹，在加热过程中该处生成了氧化铁并存留在盘条表面，在冷顶锻过程中受径向压应力而导致开裂，可通过稳定钢水过热度、及时更换磨损严重的铜管和被堵喷嘴来改善；划伤折叠开裂主要是由于精轧区域轧槽的不均匀磨损划伤和盘条在减定区进口导卫内发生扭转的共同作用导致的，可通过减轻轧槽的不均匀磨损、控制减定区域的导卫开口度和扭转角的精度来改善。

Aiming at the cracking problem of Q195 low-carbon steel wire rod during cold heading, six sets of industrial tests were conducted, and according to the crack characteristics and cracking types were classified and studied. Then, the composition, casting billet, parent metal and microstructure morphology of cracked specimens were observed by scanning electron microscopy and other equipments. Furthermore, the main reasons for densely arranged peeling cracking and scratch-folding cracking were elucidated, and the corresponding improvement measures were proposed. The results show that the densely arranged peeling cracking is mainly due to the fact that the micro-cracks on the surface or near the surface of billet generate iron oxide during the heating process which remains on the surface of the wire rod, and then carcking is caused by radial compressive stress during the cold heading process, which can be improved by stabilizing the superheat of molten steel, timely replacing the severely worn copper tubes and blocked nozzles. The scratch-folding cracking is mainly caused by the combined action of uneven wear and scratches of the rolling grooves in the finishing rolling area and the twisting of the wire rod in the inlet guide of the reducing area, which can be improved by reducing the uneven wear of the rolling groove and controlling the opening of the guide and the accuracy of the torsion angle for the reducing area.

基金项目：

作者简介：李若冰（1984-），女，硕士，副教授，E-mail：yjciteme@163.com；通信作者：杨正（1991-），男，硕士，讲师，E-mail：ncsth9r@163.com

参考文献：

[1]经勇明，郑团星，张建华. 低碳冷镦钢盘条冷镦开裂研究分析[J]. 南方金属，2020，(2)：5-7, 54.

Jing Y M, Zheng T X, Zhang J H. Research and analysis on cold heading cracking of low carbon steel rod for cold heading[J]. Southern Metals, 2020，(2):5-7, 54.

[2]张玉强. Q235盘条表面直线条纹缺陷研究[J]. 河南冶金，2018，26(2)：11-12, 49.

Zhang Y Q. Analysis on straight stripe defects on the surface of Q235 wire rod[J]. Henan Metallurgy, 2018，26(2):11-12, 49.

[3]齐晓峰. 热轧圆钢热顶锻裂纹原因分析[J]. 中国冶金，2019，29(6)：59-64.

Qi X F. Cause analysis of hot upset forging crack of hot rolled round steel[J]. China Metallurgy, 2019，29(6): 59-64.

[4]李静远，杨树峰，李京社，等. 冷镦钢开裂的原因分析及改进[J]. 中国冶金，2019，29(3)：19-23.

Li J Y, Yang S F, Li J S，et al. Cause analysis and improvement of cracking of cold heading steel[J]. China Metallurgy, 2019，29(3): 19-23.

[5]李印长，孙汝林，张全刚，等. 冷镦钢冷镦开裂影响因素分析及控制[J]. 河南冶金，2010，18(5)：19-22.

Li Y C, Sun R L, Zhang Q G，et al. Analysis and control of crack factors of cold-heading steel[J]. Henan Metallurgy, 2010，18(5): 19-22.

[6]姚双，汤玥. 合金冷镦钢盘卷表面缺陷的研究[J]. 金属材料与冶金工程，2018，(5)：8-12, 23.

Yao S, Tang Y. Research of surface defects on alloy cold heading steel[J]. Metal Materials and Metallurgy Engineering, 2018，(5): 8-12, 23.

[7]罗卫国，杨瑞文，彭光，等. 大规格SCM440钢冷镦开裂原因分析及改进[J]. 金属材料与冶金工程，2018，(4)：27-32, 42.

Luo W G, Yang R W, Peng G，et al. Cause analysis of cold head cracking and improvement of large size SCM440 steel[J]. Metal Materials and Metallurgy Engineering, 2018，(4): 27-32, 42.

[8]陆继欢，陶群南，赵满堂，等. 冷镦钢 SWRCH35K 盘条开裂原因分析及解决措施[J]. 云南冶金，2022，51(1)：91-95.

Lu J H, Tao Q N, Zhao M T, et al. Cause analysis and solution on SWRCH35K steel wire rod cracking of cold heading steel[J]. Yunnan Metallurgy, 2022，51(1): 91-95.

[9]焦帅，孙彦辉，赵勇，等. Q195钢冷镦开裂原因分析[J]. 钢铁钒钛，2017，38(3)：149-155.

Jiao S, Sun Y H, Zhao Y，et al. Analysis of cracking ｒeasons in the cold heading process of Q195 steel[J]. Iron Steel Vanadium Titanium, 2017，38(3): 149-155.

[10]介瑞华，李海，张洪洪，等. SWRCH35K钢冷镦开裂分析和工艺优化[J]. 特殊钢，2017，38(6)：45-48.

Jie R H, Li H, Zhang H H，et al. Analysis on cold-heading cracking of steel SWRCH35K and process improvement[J]. Special Steel, 2017，38(6): 45-48.

[11]章玉成，罗新中，朱祥睿，等. 10B21冷镦钢冷镦成型开裂原因分析[J]. 南方金属，2018，(3)：26-29, 62.

Zhang Y C, Luo X Z, Zhu X R，et al. Analysis on cracking of cold-heading steel 10B21 in cold heading forging[J]. Southern Metals, 2018，(3): 26-29, 62.

[12]帅习元，陈洪伟，周勇，等. 冷镦钢冷镦开裂原因及其改进措施[J]. 中国冶金，2008，18(4)：33-38.

Shuai X Y, Chen H W, Zhou Y，et al. Analysis on reason of cold heading crack of cold heading steel wire rod[J]. China Metallurgy, 2018，18(4): 33-38.

[13]YB/T 4002—2013，连铸钢方坯低倍组织缺陷评级图[S].

YB/T 4002—2013, Standard diagrams for macrostructure and defects in continuous casting billets [S].

服务与反馈：

【文章下载】【加入收藏】