锻压技术

精冲钢半冲特征连接强度实验研究

英文标题：Experimental investigation on connection strength of half-blanking feature for fine-blanking steel

单位：1.上海交通大学塑性成形技术与装备研究院2.宝山钢铁股份有限公司中央研究院 3.汽车用钢开发与应用技术国家重点实验室(宝钢)

分类号：TG386

出版年,卷(期):页码：2023,48(8):66-71

摘要：

半冲是精冲零件的重要特征之一。为研究半冲特征的连接强度特点，以厚度为3.8 mm的C20E碳素结构钢板材和厚度为4.5 mm的16MnCr5合金钢板材为实验材料，开展了工字型半冲特征成形和剪切失效实验，分析了半冲深度、成形工艺参数和特征形状对半冲特征连接强度的影响。研究结果发现：当半冲深度达到材料的半冲极限深度前，随着半冲深度的增加，半冲特征的连接强度逐步增加，最后趋于稳定；而当半冲深度达到材料的半冲极限深度时，半冲特征会提前发生开裂失效。此外，工艺参数中反顶力和凸凹模间隙对连接强度的影响较小，而半冲特征凸台的接触包络面积与有效剪切面积对连接强度的影响显著。

Half-blanking is one of the important features for fine-blanking parts. Therefore, in order to study the connection strength characteristic of the half-blanking feature, C20E carbon structural steel sheet with the thickness of 3.8 mm and 16MnCr5 alloy steel sheet with the thickness of 4.5 mm were used as experiment materials, the forming of I-shaped half-blanking feature and the shear failure experiments were carried out, and the influences of half-blanking depth, forming process parameters and feature shape on the connection strength of the half-blanking feature were analyzed. The research results show that before the half-blanking depth reaches the half-blanking limit depth of material, with the increasing of half-blanking depth, the connection strength of the half-blanking feature gradually increases, and finally tends to be stable. When the half-blanking depth reaches the half-blanking limit depth of material, the half-blanking feature cracks in advance. In addition, among the process parameters, the counter force and the clearance between punch and die have little influence on the connection strength, while the contact envelope area and the effective shear area of the half-blanking feature boss have a significant impact on the connection strength.

基金项目：

上海市优秀学术带头人计划（21XD1422000）

作者简介：关欣（1998-），男，硕士研究生,E-mail：guan_xin@sjtu.edu.cn;通信作者：庄新村（1980-），男，博士，教授,E-mail：georgezxc@sjtu.edu.cn

参考文献：

[1]Schmidt R A, Birzer F, Hfel P, et al. Cord forming and fine blanking: A hand book on cold processing steel material properties part design [M]. 赵震, 向华, 庄新村, 译. 北京: 机械工业出版社, 2008.

Schmidt R A, Birzer F, Hfel P, et al. Cord Forming and Fine Blanking: A Hand Book on Cold Processing Steel Material Properties Part Design [M]. Translated by Zhao Z，Xiang H，Zhuang X C. Beijing: China Machine Press,2008.

[2]Mori K, Nakano T. State-of-the-art of plate forging in Japan[J]. Production Engineering, 2016, 10(1): 81-91.

[3]Jang M J, Choi H S, Lee S H, et al. Design of half blanking process for reducing rollover and stress acting on tools in forming of lower tooth[J]. Transactions of Materials Processing, 2011, 20(3): 214-221.

[4]张明浩. 行星齿轮式汽车座椅调角器精冲工艺研究[D]. 长春：吉林大学, 2014.

Zhang M H. The Research of Planetary Gear Type Car Seats Illustrates Fine Blanking Process[D].Changchun：Jilin University, 2014.

[5]叶超. 行星齿轮式汽车座椅调角器精冲成形工艺研究及模具CAE/CAD[D]. 长春：吉林大学, 2016.

Ye C. Fine Blanking Forming Process Study of Planetary Gear Type Car Seat Recliner and Die CAE/CAD[D]. Changchun：Jilin University, 2016.

[6]Chen Z H, Chan L C, Lee T C, et al. An investigation on the formation and propagation of shear band in fine-blanking process[J]. Journal of Materials Processing Technology, 2003, 138(1-3): 610-614.

[7]公冶凡娇. 带凸台板件的精冲—挤压复合成形工艺研究[D]. 重庆：重庆理工大学, 2018.

Gongye F J. Forming Process Research for Combined Fine-blanking and Extrusion on Sheet Metal Parts with Boss[D]. Chongqing: Chongqing University of Technology, 2018.

[8]Hirota K, Michitsuji K. Deformation behavior in boss forming with small punch/die diameter ratio[J]. Journal of Materials Processing Technology, 2015, 216: 294-301.

[9]Gachet J M, Delattre G, Bouchard P O. Improved fracture criterion to chain forming stage and in use mechanical strength computations of metallic parts—Application to half-blanked components[J]. Journal of Materials Processing Technology, 2015, 216: 260-277.

[10]Hiên B V, Kim S M, Kim H Y, et al. Numerical analysis of parameters affecting formability in micro half blanking using thin sheet metal[A]. Proceedings of the Korean Society of Precision Engineering Conference[C]. Gyeongju，2007.

[11]韩金辉, 王建伟. 基于GTN模型的汽车座椅调角器失效分析[J]. 机械强度, 2019, 41(2): 473-477.

Han J H，Wang J W. Failure analysis of auto seat backrest adjuster based on GTN model[J]. Journal of Mechanical Strength, 2019, 41(2): 473-477.

[12]郑启德. 304不锈钢中厚板热辅助精冲成形及材料塑性变形行为研究[D]. 上海：上海交通大学, 2021.

Zheng Q D, Research on Forming Mechanism of Heat-assisted Fine-blanking Process and Plastic Deformation Behavior of 304 Stainless Steel Plate[D]. Shanghai: Shanghai Jiao Tong University, 2021.

服务与反馈：

【文章下载】【加入收藏】