锻压技术

一种H13钢端部法兰杯形件成形工艺

英文标题：A forming process of end flange cup-shaped part for H13 steel

单位：（1.郑州机械研究所有限公司河南郑州 450001 2. 西安交通大学机械工程学院陕西西安 710049 3. 三一重机有限公司江苏昆山 215300）

分类号：TG314.3

出版年,卷(期):页码：2024,49(5):17-23

摘要：

针对4Cr5MoSiV1（ASTM H13)钢在锻造过程中易产生表面裂纹等问题，以一种H13钢的端部法兰杯形锻件为研究对象，进行成形工艺开发。首先，通过高温压缩试验获得了H13钢的真实应力-真实应变曲线。其次，结合工艺试验结果，采用有限元模拟软件DEFORM-3D分析了锻造过程中金属的流动规律和应力分布，探明了试验件裂纹产生的原因，并提出了控制坯料温度均匀性、改进锻件形状等措施。最后，通过工艺改进实现了对某型H13钢杯形件的试制。试验结果表明：H13钢小锻件在锻造过程中极易出现裂纹，要尽量保证坯料温度的均匀性，控制锻造变形的一致性和接触摩擦条件。该研究对小型H13钢端部法兰杯形件的开发和生产具有一定的指导意义。

Abstract: Aiming at the problem of surface cracks easily occurring during the forging process of 4Cr5MoSiV1 (ASTM H13) steel, for H13 steel end flange cup-shaped forgings, its forming process was developed. Firstly, the true stress-true strain curve of H13 steel was obtained by high temperature compression test. Secondly, combined with the process test results, the flow law and stress distribution of the metal during the forging process were analyzed by finite element simulation software DEFORM-3D. Furthermore, the causes of cracks in the test sample were found out, and the measures such as controlling the temperature uniformity of billet and improving the shape of forgings were proposed. Finally, the trial production of a certain type of H13 steel cup-shaped part was realized through the process improvement. The test results show that H13 steel small forgings is prone to crack during the forging process. It is necessary to ensure the uniformity of billet temperature, control the consistency of forging deformation and the contact friction conditions, which has certain guiding significance for the development and production of small end flange cup-shaped part of H13 steel.

基金项目：

基金项目:郑州机械研究所有限公司技术发展基金（502SJ2023008）；郑州机械研究所有限公司创新创业专项基金（203SC2022001-16）；郑州市科技重大专项资金(152PZDZX007)

作者简介：张超(1989-)，男，硕士，高级工程师 E-mail：zc80802@163.com 通信作者：孙红星（1975-），男，博士，研究员 E-mail：sunhx@zrime.com.cn

参考文献：

［1］吴晓春,左鹏鹏. 国内外热作模具钢发展现状与趋势
［J］. 模具工业, 2013, 39(10):1-9.

Wu X C, Zuo P P. Development status and trend of hot working die steels at home and abroad
［J］. Die & Mould Industry, 2013, 39(10):1-9.

［2］刘艳宾, 徐数. 锻造比对H13模具钢高温性能的影响
［J/OL］.热加工工艺,1-4
［2024-04-22］.https://dio.org/10.141581j.cnki.1001-3814.20223360.

Liu Y B, Xu S. Effect of forging ratio on high temperature properties of H13 die steel
［J/OL］. Hot Working Technology,1-4
［2024-04-22］.https://dio.org/10.141581j.cnki.1001-3814.20223360.

［3］陈国鑫, 桑宝光, 刘宏伟, 等. H13钢高温热变形特征与动态再结晶行为
［J］. 塑性工程学报, 2022, 29 (6): 193-202.

Chen G X, Sang B G, Liu H W, et al. Hot deformation characteristics and dynamic recrystallization behavior of H13 steel at high temperature
［J］. Journal of Plasticity Engineering, 2022, 29 (6): 193-202.

［4］王姝俨, 夏华.深孔筒套精密成形工艺及模具设计
［J］.精密成形工程, 2019, 8(5): 147-151.

Wang S Y, Xia H.Deep-hole sleeve precision forming technology and die design
［J］.Journal of Netshape Forming Engineering, 2019, 8(5): 147-151.

［5］宋志峰,逯云杰,马磊,等.一种车用法兰盘零件的锻造工艺研究及模具结构优化
［J］.锻压技术, 2023, 48(9): 15-22.

Song Z F,Lu Y J,Ma L,et al. Research on forging process and optimization on die structure for an automotive flange part
［J］. Forming & Stamping Technology, 2023, 48(9): 15-22.

［6］徐伟, 万轶, 沙鑫美. 模具加载方式对传动用螺旋伞齿轮闭式锻造工艺的影响
［J］. 锻压技术, 2022, 47(6): 75-80.

Xu W, Wan Y, Sha X M. Influence of mold loading mode on closed forging process for transmission spiral bevel gear
［J］.Forging & Stamping Technology, 2022, 47(6): 75-80.

［7］杜帅, 李颖, 李敏,等. H156 热作模具钢动态再结晶的实验与数值模拟研究
［J］.锻压技术, 2023, 48(1): 245-252.

Du S, Li Y, Li M, et al. Experiment and numerical simulation study on dynamic recrystallization for H156 hot work die steel
［J］. Forging & Stamping Technology, 2023, 48(1): 245-252.

［8］李万虎, 张敬民. 汽车转向球销镦挤成形有限元分析与工艺
［J］. 锻压技术,2023,48(6):115-123.

Li W H, Zhang J M. Finite element analysis and process on upsetting extrusion forautomobile steering ball pin
［J］. Forging & Stamping Technology, 2023,48(6):115-123.

［9］Liu Y, Geng C, Lin Q Q, et al. Study on hot deformation behavior and intrinsic workability of 6063aluminum alloys using 3D Processing Map
［J］. Journal of Alloys and Compounds, 2017, 713: 212-221.

［10］孙世仁, 刘虹, 陈文琳, 等. 基于有限元软件的锻造工艺参数对牵引拉杆成形的影响分析
［J］. 热加工工艺, 2020, 49(15): 68-72.

Sun S R, Liu H, Chen W L, et al. Influence of forging process parameters on forming of traction rod based on finite element software
［J］. Hot Working Technology, 2020, 49(15): 68-72.

［11］李传民, 王向丽, 闫华军, 等. 金属成形有限元分析实例指导教程
［M］. 北京: 机械工业出版社, 2007.

Li C M, Wang X L, Yan H J, et al. Examples of Metal Forming Finite Element Analysis Tutorial
［M］. Beijing: China Machine Press, 2007.

［12］尹成波, 衣淑丽, 孙学进. 基于Deform的筒形件冷挤压数值模拟分析
［J］. 热加工工艺, 2020, 49(3): 116-118.

Yin C B, Yi S L, Sun X J. Numerical simulation analysis of cold extrusion of tube workpieces based on Deform
［J］. Hot Working Technology, 2020, 49(3): 116-118.

［13］于玲, 刘清文. 基于有限元的法兰轴结构件塑性成形工艺分析
［J］. 精密成形工程, 2023, 15(2): 218-223.

Yu L, Liu Q W. Plastic forming process of flange shaft structure based on finite element
［J］.Journal of Netshape Forming Engineering, 2023, 15(2): 218-223.

服务与反馈：

【文章下载】【加入收藏】