锻压技术

基于数值模拟的车用螺纹管件冷镦缺陷优化与试验验证

英文标题：Optimization and experimental verification of cold heading defects for automotive threaded pipe fitting based on numerical simulation

作者：王晶1 宋健民2

单位：1.濮阳职业技术学院 2.郑州大学

关键词：螺纹管件多工位冷镦折叠缺陷成形质量材料流动

分类号：TG376

出版年,卷(期):页码：2024,49(6):26-33

摘要：

为解决车用螺纹管件在7工位冷镦试模试验中出现的材料折叠问题，通过冷压缩试验获得了实际冷镦材料的塑性流动特性，并导入体积成形软件Deform-3D中完成了现行工艺流程的成形模拟。通过比较数值模拟和实际冷镦成形结果，验证了模拟试验的可靠性，同时详细介绍了局部工位的缺陷产生过程及原因，并进行了合理改进。对工位改进后的零件成形过程进行了模拟，检验了改进后的成形情况。结果表明，材料流动情况得到极大改善，不仅原折叠缺陷得以消除，零件外形的成形情况也满足预期。最后，按照改进后工艺进行了冷镦试模，冷镦结果与模拟情况完全相同，各工位零件及最终螺纹管件均未出现折叠等缺陷，成形质量较好，表明新工艺切实可行，可使螺纹管件的产量显著提升。

To solve the material folding problem of automotive threaded pipe fittings during the die trial experiment of seven-station cold heading, the plastic flow characteristics of the actual cold heading material were obtained by the cold compression experiment, and the forming simulation of the current process was completed by the volume forming software Deform-3D. Then, by comparing the numerical simulation and the actual cold heading results, the reliability of the simulation experiment was verified. At the same time, the process and reasons for local station defects were introduced in detail, and the reasonable improvements were made. Furthermore, the forming process of the parts in the improved station was simulated, and the forming situation after improvement was tested. The results show that the material flow situation is greatly improved, not only the original folding defects are eliminated, but also the forming of the part shape meets the expectation. Finally, the die trial experiment of cold heading is carried out according to the improved process, and the cold heading results are exactly the same as the simulation results. There are no folding defects in the part of each station and the final threaded pipe fittings, and the forming quality is good, indicating that the new process is feasible, and the production of threaded pipe fittings can be significantly increased.

基金项目：

2024年河南省高等教育教学改革研究与实践项目

作者简介：王晶（1981-），女，硕士，副教授,E-mail：wj19810@126.com

参考文献：

[1]张东民,盛育东,张金玉,等.六角开槽螺母的冷镦工艺优化及数值模拟[J].机械设计与制造,2018，(3):191-194.

Zhang D M,Sheng Y D,Zhang J Y,et al.Numerical simulation and optimization for cold heading of hexagonal slot nut[J].Machinery Design & Manufacture,2018，(3):191-194.

[2]冯文杰,杨创创,陈莹莹,等.基于数值模拟的汽车差速器齿轮冷挤压工艺方案[J].重庆理工大学学报：自然科学,2018,32(4):75-80.

Feng W J,Yang C C,Chen Y Y,et al.Study on cold extrusion process of automobile differential gears based on numerical simulation[J].Journal of Chongqing University of Technology：Natural Science,2018,32(4):75-80.

[3]尤富仪,张铁山,朱倩倩.汽车哈克钉铆套多工位冷镦挤工艺开发与应用[J].锻压技术,2022,47(12):31-37.

You F Y,Zhang T S,Zhu Q Q.Development and application on multi-station cold upsetting extrusion process for automobile huck rivet sleeve[J].Forging & Stamping Technology,2022,47(12):31-37.

[4]刘帮平,谌曲平,严国荣,等.航空螺栓冷镦的Deform 3D模拟与生产实践[J].精密成形工程,2012,4(3):22-26，46.

Liu B P，Chen Q P，Yan G R,et al.Simulation using Deform 3D and production practice on cold heading process of aviation bolts[J].Journal of Netshape Forming Engineering,2012,4(3):22-26，46.

[5]郑鹏辉,关悦,许吉星,等.A286高温合金十二角法兰面螺栓多工位冷镦成形工艺[J].制造技术与机床,2022，(7):45-50.

Zheng P H,Guan Y,Xu J X,et al.Multi station cold heading process of A286 superalloy twelve point flange bolt[J].Manufacturing Technology & Machine Tool,2022，(7):45-50.

[6]陈永强,陈玉,杨群.SCM435合金钢接头的冷镦工艺研究与数值模拟[J].锻压技术,2022,47(11):28-35.

Chen Y Q,Chen Y,Yang Q.Research and numerical simulation on cold heading process of SCM435 alloy steel joint[J].Forging & Stamping Technology,2022,47(11):28-35.

[7]柏世兵.基于计算机数值分析的一种汽车非标件自动化冷镦工艺[J].锻压技术,2022,47(9):30-38.

Bai S B.An automatic cold upsetting process for automobile non-standard parts based on computer numerical analysis[J].Forging & Stamping Technology,2022,47(9):30-38.

[8]樊卓志,张书彦,温树文,等.冷镦钢M6平头螺丝成型过程热-力耦合数值模拟研究[J].材料导报,2020,34(S2):1399-1406.

Fan Z Z,Zhang S Y,Wen S W,et al.Coupled thermo-mechanical modelling analysis of the cold drawing and heading processes of an M6 flat head steel screw[J].Materials Reports,2020,34(S2):1399-1406.

[9]陈波,周志明,曾华成,等.基于DEFORM-3D的筒形件冷挤压成形数值模拟[J].重庆理工大学学报：自然科学,2018,32(1):124-128.

Chen B,Zhou Z M,Zeng H C,et al.Numerical simulation on cold extrusion of cartridge based on DEFORM-3D[J].Journal of Chongqing University of Technology：Natural Science,2018,32(1):124-128.

[10]王斯华,郝小龙,肖杰,等.10B21低碳合金钢等温球化退火工艺研究[J].金属制品,2021,47(6):17-24.

Wang S H,Hao X L,Xiao J,et al.Research on isothermal spheroidizing annealing process of 10B21 low carbon alloy steel[J].Metal Products,2021,47(6):17-24.

[11]GB/T 7314—2017,金属材料室温压缩试验方法[S].

GB/T 7314—2017,Metallic materials—Compression test method at room temperature[S].

[12]胡建军,李小平.Deform-3D塑性成形CAE应用教程[M].北京:北京大学出版社,2011.

Hu J J,Li X P.Deform-3D Plastic Forming CAE Application Tutorial[M].Beijing:Peking University Press,2011.

[13]张卫新,李芳,张银芳,等.六角法兰面锁紧螺母冷镦开裂原因及预防措施[J].山西冶金,2018,41(3):68-71.

Zhang W X,Li F,Zhang Y F,et al.Causes and preventive measures of cold heading fracture of hexagon flange locknut[J].Shanxi Metallurgy,2018,41(3):68-71.

服务与反馈：

【文章下载】【加入收藏】