锻压技术

工艺参数对TA2工业纯钛无缝管热连轧力能参数的影响

英文标题：Influence of process parameters on force and energy parameters for TA2 industrial pure titanium seamless pipe in hot continuous rolling

作者：董博文1 双远华1 陈晨2 李潮2 刘旭涛1

单位：1.太原科技大学材料科学与工程学院 2.太原科技大学机械工程学院

关键词：TA2工业纯钛纵连轧轧制力轧制力矩压下率

分类号：TG339

出版年,卷(期):页码：2025,50(2):94-102

摘要：

针对TA2工业纯钛无缝钢管生产成本高、能耗大且成材率低等问题，采用实验和有限元分析相结合的方法，进行纵连轧生产钛管新工艺的探索性研究。借助DEFORM-3D有限元软件,对TA2工业纯钛管材纵连轧过程进行模拟，建立了钛管纵连轧工艺轧制力数学模型，完成了轧制力能参数的求解，并研究了不同总压下率和初轧温度下轧制力以及轧制力矩的变化规律。最后，通过实验验证了模拟的正确性。研究结果表明：TA2工业纯钛管材在稳定区的纵连轧轧制力和轧制力矩均与总压下率呈正相关，与初轧温度呈负相关，并且轧制力和轧制力矩的变化趋势完全相同。

For the disadvantages of high production cost, large energy consumption and low yield of TA2 industrial pure titanium seamless pipe, a new process of longitudinal continuous rolling for titanium pipes was researched by combining experiment and finite element analysis. The longitudinal continuous rolling process of TA2 industrial pure titanium pipe was simulated by finite element software DEFORM-3D, and the mathematical model of rolling force for the longitudinal continuous rolling process of titanium pipe was established. Furthermore, the solution of rolling force and energy parameters was completed, and the change law of rolling force and rolling moment under different total reduction rates and initial rolling temperatures was studied. Finally, the correctness of the simulation was verified by experiments. The research results show that the rolling force and rolling moment of longitudinal continuous rolling for TA2 industrial pure titanium pipe in the stable zone are positively related to the total reduction rate and negatively related to the initial rolling temperature, and the change trend of rolling force and rolling moment is completely the same.

基金项目：

山西省科技重大专项项目（20191102009）;山西省自然科学基金资助项目(202203021221158)

作者简介：董博文（1998-），男，硕士研究生,E-mail：2640340261@qq.com;通信作者：双远华（1962-），男，博士，教授,E-mail：yhshuang@tysut.edu.cn

参考文献：

[1]刘以波.TA2工业纯钛高温组织演变研究[D].上海：上海交通大学,2010.

Liu Y B. Microstructure Evolution of TA2 Commercial Pure Titanium at High Temperature [D]. Shanghai：Shanghai Jiao Tong University, 2010.

[2]李彤,苏松林,安邦,等.高性能低成本钛合金生产应用现状[J].特钢技术,2024,30(3):8-11,15.

Li T，Su S L，An B，et al. Current status of production and application of high-performance and low-cost titanium alloys[J]. Special Steel Technology,2024,30(3):8-11,15.

[3]尚筱迪.工业纯钛TA2热压缩变形行为及微观组织演变[D].西安：西安建筑科技大学,2019.

Shang X D. Hot Deformation Behavior and Microstructure Evolution of TA2 [D]. Xi′an: Xi′an University of Architecture and Technology, 2019.

[4]王怀柳.浅析工艺参数对TA2挤压管材质量的影响[J].特钢技术,2016,22(2):12-17.

Wang H L. Influence of process parameters on the quality of TA2 extruded pipe [J]. Special Steel Technology, 2016,22 (2): 12-17.

[5]郭玲,谢翀博.纯钛管坯热挤压工艺改进[J].机械制造,2015,53(6):71-73.

Guo L, Xie C B. Improvement of hot extrusion process for pure titanium tube billets [J]. Machinery, 2015,53 (6): 71-73.

[6]杨英丽,卢亚锋,郭荻子,等.氧含量及轧制工艺对纯钛管材性能的影响[J].钛工业进展,2011,28(5):27-30.

Yang Y L, Lu Y F, Guo D Z, et al. Effect of oxygen content on properties of commercial pure titanium tubes [J]. Titanium Industry Progress, 2011, 28 (5): 27-30.

[7]贠鹏飞,杨英丽,郭荻子,等.轧制Q值对小口径TA2管材组织和性能的影响[J].钛工业进展,2012,29(2):24-27.

Yun P F, Yang Y L, Guo D Z, et al. Effect of cold-rolling Q on microstructure and mechanical property of small-caliber TA2 tube [J]. Titanium Industry Progress, 2012,29 (2): 24-27.

[8]Pumpyanskiy D A， Illarionov A G，Vodolazskiy F, et al.Material science aspects of titanium tube production. Part 2： Production of cold-rolled tubes[J].Metallurgist,2024,67(9-10):1482-1493.

[9]李永林,王璐,孟鑫,等.两辊冷轧纯钛管材的工艺研究[J].热加工工艺,2019,48(17):42-45.

Li Y L, Wang L, Meng X, et al. Study on technology of cold rolling pure titanium tube with two rolls [J]. Hot Working Technology, 2019,48 (17): 42-45.

[10]Xing J, Chen H,Yang Y L,et al. Effect of drawing processing on mechanical properties and textures of TA2 pipes[J].Rare Metal Materials and Engineering, 2015,44 (2): 485-488.

[11]马浩. 纯钛及钛合金强力旋压损伤演化规律及韧性断裂预测[D]. 哈尔滨:哈尔滨工业大学,2017.

Ma H. Damage Evolution and Ductile Fracture Prediction in Power Spinning of Pure Titanium and Titanium Alloys [D]. Harbin:Harbin Institute of Technology, 2017.

[12]Li C, Shuang Y H, Chen J X, et al.Research on the impact of mandrels in titanium tubes during tube continuous rolling[J].Materials Research Express,2023,10(8):086512.

[13]雷亮.连轧无缝钢管轧制力计算模型研究[D]. 长沙：中南大学,2004.

Lei L. Research on Rolling Force Calculation Model for Continuous Rolling of Seamless Steel Tube [D]. Changsha：Central South University, 2004.

[14]肖成.无缝钢管连轧过程建模与轧制规程优化[D].长沙：中南大学,2014.

Xiao C. Modeling and Rolling Schedule Optimization of Seamless Steel Tube Rolling Process [D].Changsha： Central South University, 2014.

[15]周研.小直径无缝钢管短流程连轧特征与关键技术研究[D].太原：太原科技大学,2016.

Zhou Y. Key Technology and Characteristics Study of the Continual Mandrel Rolling Compact Process for Producing Minor Diameter Seamless Steel Tubes [D]. Taiyuan:Taiyuan University of Science and Technology, 2016.

[16]汤涛,邹树梁.无缝钢管连轧过程数值模拟及参数优化[J].钢铁研究学报,2012,24(11):6-10.

Tang T, Zou S L. Numerical simulation and parameter optimization for tandem rolling process of seamless steel tube [J]. Journal of Iron and Steel Research, 2012,24 (11): 6-10.

[17]赵志毅,董凯,余勇,等.全浮动芯棒连轧管机组轧制力测试与研究[J].钢管,2006(4):1-5.

Zhao Z Y, Dong K, Yu Y, et al. Measurement of and study on rolling forces of full-floating mandrel mill [J]. Steel Pipe, 2006(4): 1-5.

[18]代佳,双远华,苟毓俊,等.压下率对AZ31B镁合金管材纵连轧力能参数的影响[J].热加工工艺,2020,49(11):86-89.

Dai J, Shuang Y H, Gou Y J, et al. Effect of reduction rate on force-energy parameters of AZ31B magnesium alloy tube during continual mandrel rolling process [J]. Hot Working Technology, 2020,49 (11): 86-89.

[19]代佳.镁合金管材纵连轧工艺及实验研究[D].太原：太原科技大学,2020.

Dai J. Experimental Study on Longitudinal Continuous Rolling Technology of Magnesium Alloy Pipe [D]. Taiyuan:Taiyuan University of Science and Technology, 2020.

服务与反馈：

【文章下载】【加入收藏】