Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.
Location：Home >> Search
Search：
TitleAuthors_enyear,vol(issue):pagenumber
· Research on metal flow and properties in continuous extrusion deformat…   2021 ,46(10):0-0
· Research progresses of description and evaluation for friction during…   2021 ,46(10):1-11
· Evaluation model on design reasonability for additive manufacturing pr…   2021 ,46(10):12-18
· Grain refinement process for power metallurgy superalloy FGH96 based o…   2021 ,46(10):19-24
· Design of automatic feeding system for multi-position hot die forging …   2021 ,46(10):25-30
· Simulation analysis of forging for bowl head hanging plate hardware ba…   2021 ,46(10):31-37
· Forging process optimization of 7B04 aluminum alloy joint in a aircraf…   2021 ,46(10):38-43
· Manufacturing process on tube plate forgings for the third generation …   2021 ,46(10):44-48
· Analysis and control of forging cracks for 12Cr2Mo1 large ingots   2021 ,46(10):49-55
· Simulation research on wall thickness distribution of outer edge flang…   2021 ,46(10):56-61
· Research on process optimization and die surface compensation for high…   2021 ,46(10):62-69
· Optimization on process parameters for automobile rear wheel cover bas…   2021 ,46(10):70-77
· Springback compensation and experimental verification of straight conv…   2021 ,46(10):78-82
· Influence of pre-bulging pressure on hydraulic deep drawing for cylind…   2021 ,46(10):83-87
· Bending springback of U-shaped part for 6014 aluminum alloy   2021 ,46(10):88-92
· Influence of cold rolling deformation amount on microstructure and ten…   2021 ,46(10):93-98
· Effects of hot rolling reduction rate on microstructure and mechanical…   2021 ,46(10):99-105
· Influence of friction coefficient and blank wall thickness on roll ext…   2021 ,46(10):105-155
· A hybrid genetic algorithm on two-dimensional orthogonal layout for re…   2021 ,46(10):106-111
· Research on stamping structure design and heat dissipation performance…   2021 ,46(10):112-118
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com