Abstract:
|
Flexible spinning is a new type of dieless and rapid spinning proess. The causes ofthe defects in flexible spinning of cones and the effects of the main processing parametens, such as the gripping force G applied to the blank by the inner roller, the feed rate of the rollers f and the roundness radius of the outer roller r o,on the forming quality are analyzed experimentally and theoretically, the range of the optimum processing parameters to avoid the defects is presented in this paper.
|
Funds:
|
|
AuthorIntro:
|
|
Reference:
|
1 岛进小寺秀俊,村上浩隆フレキシブルスビニソタ加工法の开发塑性と加工,1997,38(440):40~44
2 王成和,刘克璋等旋压技术北京:机械工业出版社,1986
3 夏琴香,阮锋,岛进,小寺秀俊锥形件柔性旋压成形时的变形力分析金属成形工艺,2002(3):5~8
4 陈适先等强力旋压工艺与设备.北京:国防工业出版社,1986
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|