|
Abstract：
|
|
Recent aluminum profile extrusion product development is introduced,and a new product development mode is presented, which is based on the integration of concurrent engineering, artificial intelligence and Decision Support System(DSS) technologies. The mode aims to improve product quality and reduce cycle time and costs. The prototype system mainframe is given and key technologies are discussed.
|
|
Funds：
|
|
|
|
AuthorIntro：
|
|
|
|
Reference：
|
1 刘静安.轻合金挤压工具与模具北京:冶金工业出版社,1990.
2 NRChitkara,KFCelick.AGeneralizedCAD/CAMSolutiontotheThree-dimensionalOff-centricExtrusionofShapedSections:Anal ysis.InternationalJournalofMechanicalSciences,2000(42):273～294
3 PatrickUlysseOptimalextrusiondiedesigntoachieveflowbal anceInternationalJournalofMachineTools&Manufacture,1999(39):1047～1064
4 陈文亮等.铝型材挤压模CAD/CAM系统的研究.南京航空航天大学学报,1995,27(4):533～538
5 何德林,李志刚.铝型材挤压模CAD/CAM系统及其关键技术的研究.轻合金加工技术,1997,25(9):25～28
6 闫洪,包忠诩,柳和青.铝型材挤压模CAD/CAE/CAM研究进展.轻合金加工技术,1999,27(10):1～4
7 高洪深.决策支持系统理论方法案例.北京:清华大学出版社,2000.
8 StevenDEppinger.OrganizingtheTasksinComplexDesignPro jects.U .S .A .NSFDesignandManufacturingSystemConference,1992.
9 陈斐松.Petri网在现代企业决策机制中的应用.上海交通大学学报,2000,34(11):1539～1544
10HwangCL ,YoonK .MultipleAttributeDecisionMakingMethodsandApplicationsBerlin:Apringer,1981.
11ThurstonDL ,Carnahan JV .FuzzyRatingsandUtilityAnalysisinPreliminaryDesignEvaluationofMultipleAttributesASMETrans actiononMechanicalDesign,1992,114:648～658
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved