Abstract:
|
In order to Obtain titanium alloy forgings with reproducible microstructures and properties,a new method to determinate the thermomechanical parameters for forging processes was proposed based on the dissipative structure theory and dynamic material model(DMM).Taking TC11 titanium alloy for example,the proce- dure of applying the proposed appoach to determinating the forging process parameters was illustrated in detail.Some graphs valuable for defining the process window of TC11 titanium alloy forging processes using hammer or press were also presented for the first time in this article.The results of this study indicate that the reproducibility of microstructures and properties of the forgings can be guaranteed and a wide range of equipment can be selected for the forging processes while TC11 alloy forging processes are performed within a stroke by using large strain at the temperature as close as possible to β/(α+β)transus temperture.
|
Funds:
|
国家自然科学基金和航空科学基金资助课题
|
AuthorIntro:
|
|
Reference:
|
[1] J.C.Malas and V.Seetharaman,Using Material Behavior Moddl to Develop Process Control Strategies,JOM.June,1992,pp.8-14.
[2] Y.V.R.K.Prasad,H.L.Gegel,S.M.Doraivelu et al.Modeling of Dynamic Material Behavior in Hot Deformation of Ti-6264,Met.Trans.A.Vo1. 15A,1984,pp.1883-1902.
[3] H.L.Gegel,Synthesis of Automistics and Continuum Modeling to Describe Microstructure,Computer Simulation in Material-Science,Eds.by R.J.Arsenault et al.,Metals Park,OH:ASM Interational,1986,pp.291-334.
[4] P.Dadras and J.F.Thomas,Jr.,Characterization and Modeling for Forging Deformation of Ti-6242,Met.Trans.A Vol,12A,1981,pp.1867-1876.
[5] 崔士英译,微分方程,人民教育出版社,1962年,194-227页。
[6] 王少林,TC11钛合金饼材锻造质量控制与数值模拟研究,清华大学博士学位论文,1993年,25页。
[7] 钛合金高温形变强韧化技术鉴定会资料集,西北工业大学,1992年。
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|