Title:Plastic Deformation Force of Round Bar End between Dip Angle Dies
|
Authors:
Yin Jiying |
Unit:
|
KeyWords:
|
ClassificationCode:
|
year,vol(issue):pagenumber:1988,13(5):7-11
|
Abstract:
|
Till now the classical theory solution of the force for the plastic deformation of one end of round bar between the dies with dip angle has not been seen. For this deformation (?) did some suitable simplifications in the two aspects on the geometry and the distribution of the surface normal stress, and established a mechanical model. On this mechanical model (?) made use of principal stress method and Tresca yield condition to give a solution for this deformation and recommended a simplification method which can be used for engineering calculation convenintly.
|
Funds:
|
|
AuthorIntro:
|
|
Reference:
|
[1] 王仁 黄文彬著 塑性力学引论 北京大学出版社 1982
[2] 臼井英治等著 金属加工力学 国防工业出版社 1984
[3] 汪大年主编 金属塑性成形原理 机械工业出版社 1982
[4] 东北工学院机械设计教研室主编 机械零件设计手册 冶金工业出版社 1974
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|