|
Abstract：
|
|
Using the HyperXtrude module based on the Arbitrary Lagrangian-Eulerian(ALE) finite element method,steady-state simulation on the extrusion process of the hollow aluminum profile was presented.The field distributions of velocity,temperature,strain rate and stress of metal flow were obtained,and they were basically consistent with the producing test.It confirms that this method may successfully predict the potential defects occurring in the actual extrusion process and provide the theoretical basis for process parameters selection and die design.
|
|
Funds：
|
|
2006年度广东省教育部产学研结合项目(2006D90304005);;
2008年粤港关键领域重点突破项目(2008Z007)
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]吴向红,赵国群,赵新海,等.铝型材挤压成形过程数值模拟的研究现状及发展[J].系统仿真学报,2007,5(19):945-948.
[2]吴向红.铝型材挤压过程有限体积数值模拟及软件开发技术的研究[D].济南:山东大学,2006.
[3]Zhou J,Li L,Duszczyk J.3D FEM simulation of the wholecycle of aluminum extrusion throughout the transient stateand the steady state using the updated lagrangian approach[J].Journal of Materials Processing Technology,2003,134(3):383-397.
[4]张雄,陆明万,王建军.任意拉格朗日-欧拉描述法研究进展[J].计算力学学报,1997,2(1):91-102.
[5]段庆林.成型充填过程非等温非牛顿粘性流动的ALE有限元与无网格自适应耦合模拟[D].大连:大连理工大学,2007.
[6]黄科.AA6063矩形截面铝型材挤压有限元分析[D].哈尔滨:哈尔滨工业大学,2007.
[7]Altair Engineering.Altair HyperXtrude 9.0 User’s Manual[Z],2008.
[8]Van de Langkruis J,Lof J,Kool W H,et al.Comparisonof experimental AA6063 extrusion trials to 3D numerical sim-ulations,using a general solute-dependent constitutive model[J].Computational Materials Science,2000,(18):381-392.
[9]吴向红,赵国群,孙胜,等.挤压速度和摩擦状态对铝型材挤压过程的影响[J].塑性工程学报,2007,1(14):36-41.
[10]Halvorsen F,Aukrust T.Studies of the mechanisms forbuckling and waving in aluminum extrusion by use of a la-grangian FEM software[J].International Journal of Plastici-ty,2006,22(1):158-173.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved