|
Abstract：
|
|
The high-pressure sheet metal forming of tailor rolled blanks allow the production of optimized components specially developed for their future function,which can not be made from conventionally rolled sheet metal.This research aims at showing that the two main processes,i.e.,flexible rolling and high-pressure sheet metal forming,can be well represented in finite element simulations.The optimization process includes the optimizing of blanks process chain and the tool performance under a predefined load.The result shows that it is possible to simulate and optimize entire process chains and the product properties by linking the finite element models with a combinatory optimization tool.
|
|
Funds：
|
|
浙江省科技厅面上项目(2009C31063);;
浙江省教育厅一般项目(Y200805463)
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]袁国定,靖娟,王友华,等.变压边力对连续变截面辊压板成形性能的研究[J].锻压技术,2009,34(2):50-53.
[2]Urban M,Krahn M,Hirt G,et al.Numerical research andoptimization of high pressure sheet metal forming of tailorrolled blanks[J].Journal of Material Processing Technology,2006,177(1-3):360-363.
[3]Rohleder M,Roll K,Brosius A,et al.Investigation of spri-ngback in sheet metal forming using two different testingmethods[A].Proceedings of the 4th International ES-AFORM Conference in Metal Forming[C].Liege,2001.
[4]Barlat F,Lian J.Plastic behavior and stretchability of sheetmetals.Part I:A yield function for orthotropic sheets underplane stress conditions[J].International Journal of Plastici-ty,1989,5(1):51-66.
[5]倪洪启,张金萍,王树强,等.超级钢板U型弯曲回弹的数值模拟和实验研究[J].锻压技术,2009,34(1):39-41.
[6]杨雪春,董懿琼,彭伟,等.U型件回弹控制模具补偿法的研究[J].锻压技术,2009,34(1):42-46.
[7]Posielek S,Kopp R.CAOT-a computer aided opti mizationtool applied on metal forming processes[A].The 7th Inter-national Conference on Numerical Methods in IndustrialForming Processes[C].Toyohashi,2001.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved