|
Abstract：
|
|
The technological process of the motor rotor and stator part was analyzed.The design of the stamping and stretching process for the motor rotor and stator was introduced,including determination of the operation sequence and dimensions of operation position parts.The pilot pin was used in exact positioning.The processes of blanking and stretching of the part and hole were carried out continuously.The designs of the general structure,layout of the progressive and forming characteristics die for the motor rotor and stator were introduced,and the key points in designing were stated.The results show that through a ten-position progressive die for co-blanking motor rotor and stator,the blanking and bending of the part can be carried out continuously and finished product is cut off and it is proved to be of high precision and efficient in production.
|
|
Funds：
|
|
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]欧阳波仪,成百辆.电机定转子冲片自动叠铆级进模设计[J].模具工业,2006,(1):31-35.
[2]冲模设计手册编写组.模具设计手册[M].北京:机械工业出版社,2001.
[3]伍先明.小定子、转子多工位级进模设计[J].模具工业,2007,(2):25-28.
[4]田军.蒸发器右管板级进模设计[J].模具工业,2008,(2):19-21.
[5]杜继涛.支架精密多工位级进模设计[J].模具工业,2005,(9):15-17.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved