Abstract:
|
Basic on the analysis of cross-axle,a radial extrusion force calculation method was proposed.Through the analysis of a quarter of forgings,the total pressure of floating die closing extrusion was similarly counted as the sum of single axle proximate force of extrusion,friction force of work piece and bottom die and closing-die force of the floating die.After comparing the results with Deform-3D numerical simulation,the method was verified through forgings with two or three shaft and it was proved cientific.On the basis of the comparison,an amendment was further proposed aim at this method and error was reduced.
|
Funds:
|
|
AuthorIntro:
|
|
Reference:
|
[1]刘元文,李明典.非对称径向挤压力的分析[J].金属成形工艺,1990,(2):39-43.
[2]陈立军,董必占.十字轴径向挤压技术及应用装备[J].装备维修技术,1999,(2,3):146-148.
[3]左旭,吴公明,阮雪榆.径向挤压的金属流动分析[J].锻压技术,1996,21(5):13-17.
[4]洪慎章.冷挤压实用技术[M].北京:机械工业出版社,2004.
[5]宋立彬.浮动模在两端对称类零件成形工艺中的应用[J].锻压机械,2000,(4):39-40.
[6]俞汉清,陈金德.金属塑性成形原理[M].北京:机械工业出版社,1999.
[7]赵德颖,孙慧学,苏升贵.数值模拟在轿车转向节闭塞挤压成形中的应用[J].热加工工艺,2007,36(13):74-77.
[8]梁继才,付沛福,黄良驹,等.闭塞模锻液压模架的研制[J].吉林工业大学自然科学学报,2001,31(2):17-21.
|
Service:
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|