Transactions of Materials and Heat Treatment

Title：Strain analysis of flatten wires rolling process

Authors： XU Ping1 WANG Bo-jian1 LIU Shi-feng1 SHEN Zhi-jun2 LI Ya-ping2(1. Metallurgical Engineering College Xi'an University of Architecture and Technology Xi'an 710055 China 2. Xianyang Petroleum Steel Pipe and Wire Rope Co. Ltd. Xianyang 712000 China)

Unit：

KeyWords： flatten wires rolling lateral width strain

ClassificationCode：TG331

year,vol(issue):pagenumber：2009,34(3):96-99

Abstract：

Influence of different reduction on lateral spread after flat rolling of 304 austenite stainless steel rods at room temperature was investigated. Also, microstructure and microhardness were analyzed and distribution of strain during rolling was discussed. It shows that under this condition, when reduction rate Δh/h0 is less than 58.9%, the spread changes markedly, which is expressed by linear relation with reduction ratio increases, and the spread changes slowly when there is a severe deformation. Moreover, the changes of microstructure and microhardness become homogeneous with reduction increases, indicating deformation tends towards uniformity gradually.

Funds：

Reference：

[1]师晓莉,宋清华,王伯健,等.平辊压扁轧制纺织器材专用超窄钢带的工艺研究[J].纺织器材,2007,34(2):68-73.
[2]Kazeminezhad M,Kari mi Taheri A.The prediction of mac-roscopic shear bands in flat rolled wire using the finite and slab element method[J].Materials Letters,2006,60(27):3265-3268.
[3]Kazeminezhad M,Kari mi Taheri A.Deformation inhomoge-neity in flattened copper wire[J].Materials&Design,2007,28(7):2047-2053.
[4]谭树青,王经涛.金属塑性加工物理基础[M].陕西:陕西科学技术出版社,1996.
[5]刘波.高碳钢丝及制品的塑性加工工艺与组织性能研究[D].西安:西安建筑科技大学,2004.

Service：

【This site has not yet opened Download Service】【Add Favorite】