Transactions of Materials and Heat Treatment

Title：Parameterization design of rack die with Pro/E and AGW in VB environment

Authors： WANG Zhi-kui1 2 ZHAO Jun1(1.College of Mechanical Engineering Yanshan University Qinhuangdao 066004 China 2.Department of Mechanical and Electrical Engineering Nanyang Institute of Technology Nanyang 473004 China)

Unit：

KeyWords： automation gate way(AGW) shaft of involute spline cold-rolling rack die

ClassificationCode：TG335

year,vol(issue):pagenumber：2009,34(4):102-105

Abstract：

The design quality and efficiency of rack die is one of the most key problems of precise cold-rolling technique.The parameterization design and development process of rack die with Pro/E and AGW in VB environment were introduced and the parameterization design method of spline shaft and rack die and the relationship between them were described.The spline shaft forming process and related factors were also analyzed.Through forming simulation of rack die produced by parameterization,the tooth profile of formed involute spline with theoretic involute spline tooth profile was compared and the feasibility of this design method was validated in order to provide technique support for later design analysis,numerical simulation and serial production of product.

Funds：

Reference：

[1]孙士宝,崔世强,高良才.渐开线花键冷搓成形模具设计及制造[J].锻压技术,1999,24(4):43-45.
[2]夏永升.EST渐开线花键搓齿刀开发制造与应用[J].工具技术,2008,(2):46-49.
[3]孙士宝,崔世强,高良才.渐开线花键冷搓成形工艺中咬入条件的建立[J].锻压技术,1999,24(3):35-37.
[4]张继春.Pro/ENGINEER二次开发实用教程[M].北京:北京大学出版社,2003.
[5]吕琳,邓明.小齿轮件的成形工艺及模具设计[J].锻压技术,2008,33(4):86-88.
[6]胡沙,李建军,李蓓.基于SOA的数字化模具设计制造集成平台研究[J].锻压技术,2009,34(1):93-97.
[7]崔凤奎,徐永福,赵魏花.键冷滚打和铣削加工的金属组织变形研究[J].锻压技术,2008,33(2):70.
[8]杨铮鑫,齐广霞,黄勇,等.基于PRO/E的带阻尼台叶片精锻模具设计[J].锻压技术,2008,33(3):89-91.

Service：

【This site has not yet opened Download Service】【Add Favorite】