|
Abstract：
|
|
For the complex distortion and the numerous influence factors in single point incremental forming process of sheet metal,the process parameter selection is the key to improve forming quality and forming efficiency.Single point incremenal forming process was studied by finite element method,and the distribution of stress and the changing tendency of thickness were analyzed,through the numerical simulation on different amount of feed and forming paths,the effect of forming path and feed on forming result were obtained.The simulated results indicate that the maximum stress and the minimum thickness of cone parts occur at the bottom surface,and the spiral tool path can improve the forming ability and the forming quality.Incremental test shows that the numerical simulation results agree with the experimental results.
|
|
Funds：
|
|
国家自然科学基金资助项目(50605028);;
吉林大学“985工程”资助项目
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]Li Mingzhe,Cai Zhongyi,Liu Chunguo.Flexible manufac-turing of sheet metal parts based on digitized-die[J].Robot-ics and Computer-Integrated Manufacturing,2007,23:107-115.
[2]周六如,莫建华,肖祥芷.板料零件数控渐进成形工艺研究[J].塑性工程学报,2003,10(4):27-29.
[3]朱虎,姜在宽.基于数控机床的金属板材无模单点渐进成形研究[J].锻压技术,2007,32(2):88-89.
[4]Kitazawa K,Kobayashi M,Iida M.Development of com-puter controlled orbital rotary forming machine and its appli-cation to tube end flanging[J].Journal of the Japan Societyfor Technology of Plasticity,1992,380(33):1080-1083.
[5]戴昆,苑世剑,王仲仁,等.轴对称件多道次数控点成形过程的理论分析[J].塑性工程学报,1998,5(2):26-32.
[6]Jeswiet J,Hagan E.Forming parameters for incrementalforming of aluminium alloysheet metal[J].Proceedings ofthe Institution of Mechanical Engineers B,Journal of Engi-neering Manufacture,2002,(216):1367-1371.
[7]Attanasio A,Ceretti E,Giardini C.Opti mization of toolpathintwo pointsincremental forming[J].Journal of Mate-rials Processing Technology,2006,(177):409-412.
[8]Yamashita M,Gotoh M,Atsumi S Y.Numerical si mulationof incremental forming of sheet metal[J].Journal of Materi-als Processing Teghnology,2008,(199):163-172.
[9]Kopac J,Kapus Z.Incremental sheet metal forming on CNCmilling machine-tool[J].Journal of Materials ProcessingTeghnology,2005,(162-163):622-628.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved