|
Abstract：
|
|
Since a surface effect is of complexity for drawing process with pulse vibration,a dynamic differential equation was built by mechanics analyzed for cell body in drawing die and combined with the Fourier transform.On the basis of the non-local friction theorem,some non-local infection coefficients concerning with friction were computed,and the linearity strengthened model was used for searching approximate resolution,then dynamic friction model for pulse vibration drawing was obtained on non-local condition.According to metal material mechanical performance parameters,drawing process parameters,vibration parameters and the non-local infection coefficients were given.The simulation by MATLAB shows that the surface effect of pulse vibration drawing mainly relates with vibration parameters,and its surface effect appearing during drawing process is more superior than that of the other vibration.These results can provide important guidance for vibration available used.
|
|
Funds：
|
|
国家自然科学基金资助项目(50665003);;
江西省研究生创新基金项目(YC07A077)
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]Dnwson G R,Winsper C E,Sansome D H.Application ofhigh and low frequency scillations to the plastic deformation ofmetal[J].Metal Forming,1996,231(8):234-238.
[2]隈部淳一郎.振动切削[M],韩一昆,薛万夫,译.北京:机械工业出版社,1985.
[3]Oden J T,Pires E B.Nonlocal and nonlinear friction laws andvariational principles for contact problem in the elasticity[J].J.Appl.Mech.ASME,1983,50:67-76.
[4]扶名福.非局部摩擦在塑性加工中的应用[J].力学,2002,3(22):112-115.
[5]蔡改贫,翁海珊,姜志宏.振动拉拔的非局部摩擦问题及表面效应探究[J].机械工程学报,2006,42(8):190-194.
[6]何勍.金属振动塑性加工中体积效应的机理分析[J].金属成形工艺,1998,6(16):35-36.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved