Transactions of Materials and Heat Treatment

Title：Research and application of magnetic pulse joining for dissimilar metal materials

Authors： YU Hai-ping1 XU Dian-guo2 LI Chun-feng1 (1.School of Materials Science and Technology Harbin Institute of Technology Harbin 150001 China 2.School of Electrical Engineering and Automation Harbin Institute of Technology Harbin 150001 China)

Unit：

KeyWords： magnetic pulse joining dissimilar metal materials electromagnetic forming

ClassificationCode：TG391

year,vol(issue):pagenumber：2009,34(2):1-6

Abstract：

Magnetic pulse joining is basically a solid state welding technique based on the electromagnetic forming technology.The technique has some peculiar advantages on the metallurgical joining of dissimilar metal materials,which are hard to be welded through traditional melt welding methods.The principle and characteristics of magnetic pulse joining were described;the researches on joint strength and microstructure,the applications and equipment of magnetic pulse joining abroad and inland were focused.The significance to develop the technology was presented.

Funds：

中国博士后科学基金资助项目(20080440127);; 黑龙江省博士后资助经费项目(LBH-Z07165)

Reference：

[1]Dana Corporation.Magnetic pulse welding process to decreasevehicle weight and increase fuel efficiency[EB/OL].ht-tp://www.atp.nist.gov/eao/sp950-3/danacorp.pdf,2002.
[2]李春峰.高能率成形技术[M].北京:国防工业出版社,2001.
[3]Kwang-Jin Lee A,Shinji Kumai,Takashi Arai,et al.Inter-facial microstructure and strength of steel/aluminum alloy lap jointfabricated by magnetic pressure seam welding[J].Materials Sci-ence and Engineering A,2007,7(471):95-101.
[4]Marya M,Priem D,Marya S.Microstructure at aluminum-copper magnetic pulse weld[J].Materials Science Forum,2003,426-432:4001-4006.
[5]Ben-Tzion Spitz,Victor Shribman.Magnetic pulse weldingfor tubular applications:discovering new technology for weld-ing conductive materials[EB/OL].http://www.thefabri-cator.com/TubePipeFabrication/TubePipeFabrication_Arti-cle.ID=54,2001.
[6]Hwang W S.Joining of copper tube to polyurethane tube byelectromagnetic pulse forming[J].Journal of Materials Pro-cessing Technology,1993,(37):83-93.
[7]Andrew Gust.Magnetic pulse welder[EB/OL].http://show.docja-va.com:8086/courses/thesis/agust.doc,2006.
[8]Kim I S,Chang-Eun Park,Hak-Hyoung Kim,et al.Astudy on development of FEM model for the optimal parame-ters in an electromagnetic impulse welding[J].Journal of theChinese Society of Mechanical Engineers,2006,27(2):217-220.
[9]Kohn G,Stern A,Munitz A.Advanced welding technolo-gies for magnesium alloys[EB/OL].http://www.sae.org/technical/papers/2001-01-3442,2001.
[10]Hwang W S.Electromagnetic joining of aluminum tubes onpolyurethane cores[J].Journal of Materials ProcessingTechnology,1992,(34):341-348.
[11]Stern A,Aizenshtein M.Bonding zone formation in magneticpulse welds[J].Science and Technology of Welding&Join-ing,2002,7(5):339-342.
[12]Tomokatsu Aizawa,Mehrdad Kashani,Keigo Okagawa.Application of magnetic pulse welding for aluminum alloys andSPCC steel sheets[J].Welding in the World,2005,49(9):212-222.
[13]Anna Kochan.Magnetic pulse welding shows potential for au-tomotive applications[J].Assembly Automation,2000,20(2):129-132.
[14]Shribman V,Stern A,Livshitz Y,et al.Magnetic pulsewelding produces high-strength aluminum welds[J].Weld-ing Journal,2002,4:33-37.
[15]Kore S D,Date P P,Kulkarni S V.Effect of process param-eters on electromagnetic impact welding of aluminum sheets[J].International Journal of Impact Engineering,2007,(34):1327-1341.
[16]Pradip K Saha.Electromagnetic forming of various aircraftcomponents[J].SAE Technical Paper Series(2005-01-3307).SAE International AeroTech Congres and Exhibition.TX,USA,2005:1-11.
[17]Shribman V,Gafri O,Livshitz Y.Magnetic pulse weldingand joining-a new tool for the automotive industry[J].SAETechnical Paper Series(2001-01-3408).SAE Int and MesseDu¨sseldorf ATTCE Proc Vol 3:Manufacturing.2001:131-146.
[18]Yuri Livshiz,Oren Gafri.Technology and equipment for in-dustrial use of pulse magnetic fields[A].Digest of Tech Pa-pers-IEEE Int.Pulsed Power Conf.,1999.
[19]Peihui Zhang.Joining enabled by high velocity deformation[D].Ohio:Ohio State University,2003.
[20]Priem D,Marya S K.Application of magnetic pulse weldingfor dissimilar aluminum-copper joints[EB/OL].http://www.aws.org/conferences/abstracts/2003/02b.pdf.
[21]Kimchi M,Shao H,Cheng W,et al.Magnetic pulse weld-ing aluminum tubes to steel bars[J].Welding in the World,2004,48(3-4):19-22.
[22]Aizawa T,Magnetic pressure seam welding of aluminumsheets[J].Welding International,2003,17(12):929-933.
[23]王永志,李春峰,赵志衡,等.管-杆磁脉冲连接工艺研究[J].锻压机械,1999,(1):12-14.
[24]Anthony L,Velocci Jr.Venture rife with marketing pitfalls[J].Aviation Week and Space Technology.1993,139(19):59-61.
[25]Zhang P,Kimchi M,Shao H,et al.Analysis of the electro-magnetic impulse joining process with a field concentrator[A].Ghosh S,Jose M,Castro JM,et al.Proceedings ofthe 8th International Conference on Numerical Methods in In-dustrial Forming Processes[C].Columbus:Ohio StateUniversity,2004.
[26]Golovashchenko S.Electromagnetic forming and joining forautomotive applications[A].Kleiner M.Proceedings of 2ndInternational Conference on High Speed Forming[C].Dort-mund:Dortmund University,2006.
[27]Andrew Gust.Magnetic pulse welder[EB/OL].http://show.docjava.com:8086/courses/thesis/agust.doc,2006.
[28]陈志强,周学斌,杨亨林,等.MF-16K型电磁成形机的研制及其在弹箭装配中的应用[J].金属成形工艺:模具设计与制造专集,1995,13(4):82-85.
[29]张弛,汤晋松.弹箭装配的电磁成形技术[J].兵器科学与工程,1992,15(9):33-37.
[30]贺锡纯,赵兰.用电磁成形法组装大弹壳的可行性研究[J].锻压机械,1993,(3):22-24.

Service：

【This site has not yet opened Download Service】【Add Favorite】