|
Abstract：
|
|
With the advantages of light weight,high structure intensity and good rigidity,integral panel skins have been widely applied in aerospace industry.However,the manufacturing process of integral panel skins is complex and the fabrication period is very long.To solve this problem,a new process was presented.The same thickness panel was machined to the integral panel skin with grid-type ribs by high precision CNC method,and then it was filled,bended,and finally removed the filler.It was researched during the roll bending experiments of plastic and rubber fillers.The results indicate that good integral panel skins can be manufactured by this process.
|
|
Funds：
|
|
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]曾元松.喷丸成形技术在民用飞机整体壁板研制中的应用[J].航空制造技术,2008,(1):54-55.
[2]姜年祥,刘劲松,曾元松,等.网格式整体壁板自适应增量压弯预测[J].沈阳理工大学学报,2006,(3):15-18.
[3]刘劲松,张士宏,曾元松,等.网格式整体壁板增量成形有限元模拟[J].材料科学与工艺,2004,(5):515-517.
[4]刘劲松,张士宏,王忠堂,等.整体壁板增量压弯试验与模拟[J].金属成形工艺,2003,21(6):23-25.
[5]张新华,曾元松,吴为,等.某型火箭整体壁板增量压弯成形试验[J].航空制造技术,2004,(2):92-94.
[6]刘劲松,许沂,张士宏,等.整体壁板增量压弯过程应力应变模拟[J].塑性工程学报,2003,10(5):42-45.
[7]任丽梅,王忠堂,刘劲松,等.异型截面筋条压弯稳定性分析及数值模拟研究[J].塑性工程学报,2003,10(5):39-41.
[8]Zeng J,Liu Z,Champliaud H.FEM dynamic simulation andanalysis of the roll-bending process for forming a conical tube[J].Journal of Materials Processing Technology,2008,198(1-3):330-343.
[9]赵长喜,李继霞.航天器整体壁板结构制造技术[J].航天制造技术,2006,(4):44-48.
[10]Gandhi A H,Raval H K.Analytical and empirical modelingof top roller position for three-roller cylindrical bending ofplates and its experimental verification[J].Journal of Materi-als Processing Technology,2008,197(1-3):268-278.
[11]Hu W,Wang Z R.Theoretical analysis and experimentalstudy to support the development of a more valuable roll-ben-ding process[J].International Journal of Machine Tools andManufacture,2001,41(5):731-747.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved