Transactions of Materials and Heat Treatment

Title：FEM simulation and analysis of cold forging process of shaft with boss

Authors： FENG Wen-jie CHEN Ying-ying YANG Tao(Automobile College Chongqing University of Technology Chongqing 400050 China)

Unit：

KeyWords： shaft with boss free cold forging opened cold forging numerical simulation forming force

ClassificationCode：TG376.3

year,vol(issue):pagenumber：2009,34(2):133-136

Abstract：

Base on the method of numerical simulation,both free cold forging and opened cold forging of shaft with boss were analyzed.In free cold forging,the forming force was small and the life of die was prolonged.But it would cost more raw materials.While in opened cold forging,lots of material would be saved.The forming force could be controlled and the process precision could be ensured,through selecting appropriate cavity height,with the help of FEM analysis software DEFORM.The results show that it is good for simulating the forming process of the boss through numerical simulation,which is helpful to control the forming force in opened cold forging.

Funds：

重庆市科委攻关项目(CSTC,2005AC3033)

Reference：

[1]彭大暑.金属塑性加工力学[M].长沙:中南工业大学出版社,1986.
[2]李传民,王向丽,闫华军,等.DEFORM 5.03金属成形有限元分析实例指导教程[M].北京:机械工业出版社,2007.
[3]Hae Yong Cho,Gyu Sik Min,Chang Yong Jo,et al.Process design of the cold forging of a billet by forward andbackward extrusion[J].Journal of Materials ProcessingTechnology,2003,(135):375-381.
[4]俞汉清.金属塑性成形原理[M].北京:机械工业出版社,1999.
[5]孟凡中.弹塑性有限变形理论和有限元方法[M].北京:清华大学出版社,1985.
[6]冯文杰,陈莹莹,陈碧楠.矩形花键轴开式冷挤压成形力的数值模拟研究[J].锻压技术,2008,33(1):66-68.
[7]Guo Jinji,Zhao Sheng,Xing Haoxu,et al.A slip-line meth-od for calculating extrusion force of steel helmet with cold ex-trusion moulding[J].Journal of Systems Engineering and E-lectronics,1999,(2):75-81.
[8]徐虹,贾树盛,白凤梅,等.基于数值模拟的渐开线花键件冷挤压工艺参数优化[J].塑性工程学报,2005,12(6):7-10.

Service：

【This site has not yet opened Download Service】【Add Favorite】