|
Abstract：
|
|
Productivity and precision are the principal problems to be solved in forging technology and design in order to increase the material utilization rate.A compound forging method for automobile transaxle driven gear was applied.The blank part was formed on flatdie hammer,its intermediate shape was formed by staving press and its finished shape was formed by friction press.This method extracts merits for the three forging technologies according to the reasonable operation arrangements.Compared to the traditional die forging method,17.5% material is saved.A good result is achieved on the aspects of technology and economy.
|
|
Funds：
|
|
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]许发樾.实用模具设计与制造手册[M].北京:机械工业出版社,2001.
[2]《模具制造手册》编写组.模具制造手册[M].北京:机械工业出版社,1982.
[3]高锦张.塑性成形工艺及模具设计[M].北京:机械工业出版社,2001.
[4]李云程.模具制造工艺学[M].北京:机械工业出版社,1992.
[5]刘庚武,摩擦压力机上套锻工艺的研究[J].锻压技术,2007,32(4):139-140.
[6]宋志真,刘群英,梁新合,等.铲齿的模锻工艺设计[J].锻压技术,2007,32(3):19-21.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved