|
Abstract：
|
|
It described more systematically for constituting the forging main body shape elements of steering knuckle,such as the axle,hole,disk,ear,cylinder,arm,etc.The common forgings of steering knuckle were divided into eight kinds according to horizontal forging and vertical forging combining with the different combination of the forging body shape elements which based on practical experiences of technological design and analysis of steering knuckle forging.Moreover,it provided the forging examples of all kinds of typical structures for steering knuckle and listed the applied types of vehicle in order to provide some reference for technological design of forging and some other related work.
|
|
Funds：
|
|
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]冯祯龙.汽车转向节的一种锤上备坯方案[J].锻压技术,1993,18(1):21-22.
[2]缪文民.载重汽车转向节的锤上模锻[J].机械工人:热加工,1994,(4):10-11.
[3]赵孝一.NKR转向节的锻造[J].金属成形工艺,1994,(2):53-56.
[4]陈小斌.汽车转向节锤上锻造工艺[J].锻压机械,1996,(1):40-41.
[5]傅翔.重型汽车转向节的锻造[J].锻压机械,1990,(2):22-24.
[6]潘洪仁.大型立式转向节锻造成形[J].热加工工艺,1994,(5):51.
[7]许伟德.汽车转向节模锻工艺的改进[J].模具工业,1994,(5):11-13.
[8]毛厚军.汽车转向节的少飞边锻造技术[J].锻压技术,1998,23(5):17-19.
[9]刘加臣,李相伟.重型汽车转向节的挤压锻造[J].锻压机械,1998,(6):21-23.
[10]方文武,宋加兵,徐磊.模锻锤上叉类零件锻压成型工艺分析[J].模具工业,2000,(10):48-49.
[11]丁金根,汪忠良.挤压成形在锤上模锻中的应用[J].模具工业,2003,(9):43-45.
[12]张德春,孙吉宝.STEYR转向节模锻成形工艺研究[J].锻压技术,2004,29(1):7-8.
[13]王丽丽.轿车转向节成形新工艺研究[D].秦皇岛:燕山大学,2005.
[14]于沪生,余宁,杨青春.汽车转向节锻件的缺陷及其消除方法[J].锻压技术,1996,21(2):8-10.
[15]周杰,孙小孟,权国政,等.异形转向节工艺设计及成形分析[J].锻压装备与制造技术,2005,(5):37-39.
[16]邬惠东,张洪欣.汽车技术词典[M].北京:人民交通出版社,1996.
[17]陈家瑞.汽车构造:下册[M].北京:人民交通出版社,2003.
[18]肖永清,杨忠敏.汽车前桥及转向系统结构与维修[M].北京:国防工业出版社,2004.
[19]詹辉,苟建华.高档客车转向节锻件模锻工艺开发[J].机械工人:热加工,2004,(12):17-19.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved