Transactions of Materials and Heat Treatment

Title：Finite element analysis and improvement of forging mould for crankshaft

Authors： WU Yu-nong XU Zhong-ming(Department of Mechanical and Electrical Engineering Shunde Polytechnic Shunde 528333 China)

Unit：

KeyWords： combined structure forging mould crankshaft working life finite element analysis

ClassificationCode：TG316.3

year,vol(issue):pagenumber：2008,33(5):17-19

Abstract：

The finite element method was used to analysis the stress in the forging mould of crankshaft blank to solve the long existed problem of the forging mould short working life.A combined structure forging mould was designed and the parameters were determined according to the results of the analysis.The working life of the combined structure mould was several times longer than the original mould.It indicates that the improvement of the mould structure is significant and it is important to use the finite element method in mould design.

Funds：

顺德职业技术学院基金项目(2006-KJ12)

Reference：

[1]吕成,张立文,牟正君,等.TC4钛合金锻件锻造过程三维热力耦合有限元模拟[J].锻压技术,2007,32(1):28-31.
[2]任运来,聂绍珉,牛龙江,等.大型锻件锻造拔长新工艺[J].机械工程学报,2007,43(11):224-228.
[3]罗静,胡建军,金艳,等.摩托车档位齿轮成形数值分析与模具结构优化[J].锻压技术,2007,32(4):124-126.
[4]王海平,张耀宗,李林刚,等.轿车差速器齿轮精密成形的有限元数值模拟[J].锻压技术,2007,32(5):121-124.
[5]廖培根,方刚,雷丽萍,等.大锻件中心压实法(JTS)锻造过程有限元分析[J].锻压技术,2007,32(6):43-46.
[6]锻模设计手册编写组.锻模设计手册[M].北京:机械工业出版社,1991.
[7]张波,盛和太.ANSYS有限元数值分析原理与工程应用[M].北京:清华大学出版社,2005.

Service：

【This site has not yet opened Download Service】【Add Favorite】